• Journal of Korean Society of Environmental Engineers
• /
• v.36 no.10
• /
• pp.711-718
• /
• 2014

Investigated the processing characteristics of the pollutants and runoff due to storm events in the actual application of the road fields and a Non-Point Sources (NPS) pilot scale equipment. This phenomenon has occurred in the influent bypass the blockage occurs after 90 min the expended polymeric media was filled with filtered column. When entering a treatment tank SS 200 mg/L or more high concentration of effluent treatment efficiency was reduced from the reaction time 60 min. Influent concentration less then SS 180 mg/L was stable handling. The $COD_{Cr}/SS$ ratio were analyzed with 0.67, median value. Showed 92.1% and 82.3% respectively with an average removal rate of the SS and the $COD_{Cr}$. If the influent concentration of TP is the 0.5 mg/L or less, the quality of the treated water is 0.1 mg/L levels were expressed in a stable process. And when entering the 1.0 mg/L or more of the treated water, had a greater than average 0.2 mg/L. If the influent concentration of TN is 4~10 mg/L, the treatment water quality level was kept a 1.5~3.0 mg/L. The average removal efficiency of TP and TN respectively 73.9%, 50.4%.

• The Journal of the Korean bone and joint tumor society
• /
• v.13 no.2
• /
• pp.96-104
• /
• 2007

Purpose: The authors investigated whether 35 flexible nail-rotating hinge composite reconstructions around knee joint minimize junctional osteolysis of host bone. Material and Method: The reconstructive technique was as follows: 1) en bloc tumor resection, 2) filling of the host bone marrow cavity with multiple Ender nails, 3) assembling the Ender nails and an Endo-Link type total knee component with wire and bone cement. Result: Mean follow-up was 53 months (ranged 30~79). At final follow-up, 29 patients retained a mobile joint. Resection of more than 40% of bone showed a positive relationship with junctional hypertrophy (p=0.028). Eight patients showed nail breakage and eight prostheses were removed due to early or late infection. The cumulative prosthetic survival rate was 33% at 6 year. Average functional score according to the MSTS criteria was 26.8. Conclusion: Mid-term evaluations showed that results were fair. The revision process was straightforward. Junctional hypertrophy observed appears to give some clues as to how to minimize osteolysis at the prosthesis-host junction after modular prosthesis fixation.

• The Korean Journal of Rehabilitation Nursing
• /
• v.6 no.2
• /
• pp.137-151
• /
• 2003

The purpose of this study was to develop a multidisciplinary team approach program for stroke survivors, and to identify its effects on their rehabilitation. The team was composed of 7 members: a rehabilitation nurse, a physician, a physical therapist, an occupational therapist, a therapeutic recreational therapist, a nutritionist, and a researcher. A quasi-experimental study was performed with 36 subjects: 18 in the experimental group and 18 in the control group, using a noneqivalent control group pretest-posttest design. The experimental group participated 4 times in rehabilitation programsfocused on information and emotional support provided by the rehabilation team-and received telephone counseling from the researcher. The control group did not receive any treatment. The selection criteria for the subjects in this study were: (a) patients who were diagnosed as having had an ischemic stroke within the last year, (b) patients free of any communication disorder, (c) and those having a primary caregiver who could assist in filling out the form assessing the level of ADL. The data were collected from patients who had been discharged from a tertiary hospital, between October 1st, 1999 and September 30th, 2000. The data were analysed by $X^2$ test, Fisher's exact test, ANCOVA, Wilcoxon's rank sum test, and Wilcoxon's signed rank test using an SAS program. The results were as follows: 1. In terms of physical variables (blood pressure, grasp power, and ADL) 1) There was a significant difference in blood pressure between the two groups (systolic pressure P= .012, diastolic pressure P= .050). 2) There was also a significant difference in grasp power between the two groups (affected side : P= .012, unaffected side : P= .010). 3) There was no significant change in the level of ADL between the two groups. 2. In terms of psychosocial variables (depression, self-efficacy, self-esteem, and social activities) 1) There were no significant differences between the two groups. However, all four psychosocial variables showed a tendency to improve in the experimental group, while only two variables (depression and self-efficacy) showed a simalar tendency in the control group. 2) The level of social activities in the control group decreased significantly after a month (P= .050). 3. The level of life satisfaction improved in both groups, but no significant difference was found. Stroke has high recurrence rate and requires considerable follow-up care. The program used in this study was developed and designed for stimulting the rehabilitation process of stroke survivors. Through the program period of one month (meetings were held weekly), a positive effect was detected in physical variables, although the psychosocial variables did not improve significantly. In retrospect, a one month period may not be an adequate length of time to improve the psychosocial variables, as the stroke survivors were complicated cases, and most of them were elderly. Further research is therefore recommended by increasing the length of program, so that its effect can be more noticeable.

• Korean Journal of Medicinal Crop Science
• /
• v.5 no.2
• /
• pp.108-112
• /
• 1997

This experiment was carried out to clarify the effect of cultural years on the growth and yield of Fritillaria thunbergii. It was planted on Middle September, with high ridge between $100cm\;(2 lines){\times}interrow 9cm$ and N-P-K=8.1-11.2-8kg/10a of fertilizers treated basal application. Cultural years were 1, 2 and 3 years, the block of 2 or 3 years was additional same amount of fertilizers at early spring. The results were summarized are as follows. Rapid bulb filling stage was begun 32 days after sprouting, and completed bulb growth needed 72 days. Dry weight/fresh ratio of bulb was ranged from $27.2{\sim}30.3$%. Rate of over 5g bulb weight was 89% at 1 year, 87% at 2 years and 77% at 3 years and bulb yield were 638kg/10a at 1 year. Compared with yield at 1 year, the yield increased 88% at 2 years and 189% at 3 years.

• Journal of the Korean GEO-environmental Society
• /
• v.21 no.7
• /
• pp.17-26
• /
• 2020

The soft ground in the southwest coastal area composed of marine clay is greatly influenced by sediment composition, particle size distribution, particle shape, adsorption ions and pore water characteristics, tide and temperature. In addition, the geotechnical properties are very complex due to stress history, change in pore water, dissolution process and gas formation. In this study, the physical and mechanical properties of the soft ground were evaluated through field tests and laboratory tests to investigate the strength increase characteristics according to consolidation on the soft ground in the southwest coast. In addition, in order to understand the consolidation behavior of soft ground such as subsidence, pore water pressure, horizontal displacement of soil by embankment load, measuring instruments such as pore water pressuremeter, settlement gauge, inclinometer and differential settlement gauge was installed, and a piezocon penetration test was carried out step by step to confirm the increase in shear strength of the ground. Through this, it was confirmed that the shear strength of the ground is increased according to the stages of filling. In addition, by evaluating the properties of consolidation behavior, strength increase and consolidation prediction by empirical methods and theories were compared to analyze the characteristics of strength increase rate and consolidation behavior in consideration of regional characteristics.

• Journal of the Microelectronics and Packaging Society
• /
• v.16 no.3
• /
• pp.19-24
• /
• 2009

Formation of an adhesion/barrier layer and a seed layer by sputtering techniques followed by electroplating has been one of the most widely used methods for the filling of through-Si via (TSV) with high aspect ratio for 3-D packaging. In this research, the adhesion and diffusion-barrier properties of the $TaN_x$ film deposited by reactive sputtering were investigated. The adhesion strength between Cu film and $SiO_2$/Si substrate was quantitatively measured by $180^{\circ}$ peel test and topple test as a function of the composition of the adhesive $TaN_x$ film. As the nitrogen content increased in the adhesive $TaN_x$ film, the adhesion strength between Cu and $SiO_2$/Si substrate increased, which was attributed to the increased formation of interfacial compound layer with the nitrogen flow rate. We also examined the diffusion-barrier properties of the $TaN_x$ films against Cu diffusion and found that it was improved with increasing nitrogen content in the $TaN_x$ film up to N/Ta ratio of 1.4.

• Restorative Dentistry and Endodontics
• /
• v.34 no.6
• /
• pp.467-476
• /
• 2009

The aim of this study was to measure the dentinal tubular fluid flow (DFF) during and after amalgam and composite restorations. A newly designed fluid flow measurement instrument was made. A third molar cut at 3 mm apical from the CEJ was connected to the flow measuring device under a hydrostatic pressure of 15 $cmH_2O$. Class I cavity was prepared and restored with either amalgam (Copalite varnish and Bestaloy) or composite (Z-250 with ScotchBond MultiPurpose: MP, Single Bond 2: SB, Clearfil SE Bond: CE and Easy Bond: EB as bonding systems). The DFF was measured from the intact tooth state through restoration procedures to 30 minutes after restoration, and re-measured at 3 and 7days after restoration. Inward fluid flow (IF) during cavity preparation was followed by outward flow (OF) after preparation, In amalgam restoration, the OF changed to IF during amalgam filling and slight OF followed after finishing. In composite restoration, application CE and EB showed a continuous OF and air-dry increased rapidly the OF until light-curing, whereas in MP and SB, rinse and dry caused IF and OF, respectively. Application of hydrophobic bonding resin in MP and CE caused a decrease in flow rate or even slight IF. Light-curing of adhesive and composite showed an abrupt IF. There was no statistically significant difference in the reduction of DFF among the materials at 30 min. 3 and 7 days after restoration (p > 0.05).

• The Journal of the Korea Contents Association
• /
• v.13 no.9
• /
• pp.305-311
• /
• 2013

This study analyzed the oral status after recording the images by using QLF-D with targets of 38 youth people with hearing impairment and hearing language impairment. In order to investigate the state of oral hygiene, plaque index (O'Leary index) and contents of investigation of the state of the teeth included the number of sound teeth, the number of caries teeth, dental caries experience and the number of filling teeth. The following results were obtained. First, women lacked the management on plaque and had more caries teeth compared with men. In terms of impairment classification, subjects with both hearing and language impairment lacked the management on plaque and had more caries teeth. Second, subjects who did not get an oral exam for one year had more caries teeth. Oral hygiene score was the highest with the brushing time for 3-4 minutes. The number of sound teeth was increased as the brushing time was increased. In addition, the oral hygiene management time was the highest when cleaning the teeth, gums and tongue at the same time. Third, it was shown that the satisfaction of oral health education by using the new equipment was high. As a result of this study, in order to improve the oral health level of impaired students, they shall be trained to manage their teeth by themselves and educated to increase their motivation and practice. Thus, it is thought that various approaches which are differentiated from existing methods are required to be tried.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.22 no.2
• /
• pp.68-75
• /
• 2018

In this study, to solve the problems of the conventional crack repair and injection method, high elasticity latex was used as the material of the storage tube to withstand the high pressure in the center part differently from the general port. When the repair solution was injected into the crack part, The TPS method was developed so that the air existing in the TPS can be discharged. In addition, a new infusion port in which a valve blocking the backflow of the remediation solution was installed at the injection port was developed and the physical characteristics of the port were analyzed. As a result of the evaluation, it was found that the filling rate of the remedial solution was improved compared to the existing ordinary injector method, and the cracks were completely filled in the test conditions. Compressive strength and tensile strength after repair showed about 20% decrease after repair in case of using ordinary injector method, while TPS method showed about 2~7% increase after repair. The results of this study showed that the injection port method using the elastic storage tube increased the injection performance and the quality after repair compared to the conventional injector method. The result of this study is expected to be utilized as the basic data for application and commercialization of the result to the practical structure.

• Korean Journal of Breeding Science
• /
• v.42 no.4
• /
• pp.407-412
• /
• 2010

Recently, peoples are greatly concerned with global temperature change because global warming can be a potential serious effect on agriculture production such as yield reduction and poor grain quality. On the other hand, it can bring some beneficial effects through twice cultivation of rice in temperate region. In order to overcome this situation, we developed extremely early-maturing rice 'Milyang255' which heading date was similar with 'Jinbuolbyeo'. Based on agronomic characteristics of 'Milyang255', it has very short stature as 65 cm of culm length and slightly lower spikelets number per panicle compared with that of 'Jinbuolbyeo'. However, the grain appearance, palatability and other items were better than those of 'Jinbuolbyeo' in panel test of cooked rice. The milled rice yield of 'Milyang255' is 3.94 MT/ha at the early transplanting. Especially, its grain filling rate was higher and faster than Jinbuolbyeo and the head rice ratio in milled rice was also higher. Thus, 'Milyang255' can efficiently reduce the growth duration of rice cultivation and also be useful material for research on twice cultivation of rice in Korea.