• Restorative Dentistry and Endodontics
• /
• v.33 no.1
• /
• pp.66-75
• /
• 2008

This study examined the influence of the apical sizes on the sealing ability of a root canal filling. Thirty-six single rooted teeth with a single canal were divided into 3 groups (n = 12) and instrumented with either the $Profile^{(R)}$ or $LightSpeed^{(R)}$ system to achieve three different apical sizes (master apical file [MAF] of #25, #40, or #60). The teeth were filled with gutta perch a using a modified continuous wave technique. The level of microleakage was determined by immersing ten teeth from each group into India ink for 1 week followed by clearing with nitric acid, ethyl-alcohol, and methylsalicylate. The microleakage was measured using vernier calipers. The data was analyzed statistically using Kruskal-Wallis one-way ANOVA and a Student-Newman-Keuls Method. Two teeth from each group were sectioned horizontally at 1, 2, 3 and 4 mm from the apex in order to observe a cross section. The apical size was significantly (p < .05) influenced the level of microleakage. In the Student-Newman-Deuls Method, MAF sizes of #25 and #40; and MAF sizes of #25 and #60, respectively showed a statistically significant difference. There was no significant difference between #40 and #60. In most cross sections, oval-shaped canals were observed, and the irregularity of the internal surface increased with decreasing apical size. There was also an increase in the area of recess, which is the area where the canal space is not filled with either gutta-percha or sealer. When the root canals are filled using a modified continuous wave technique, canal filling with more consistent and predictable outcome may be expected as the apical preparation size is increased.

• Journal of Food Hygiene and Safety
• /
• v.37 no.3
• /
• pp.181-188
• /
• 2022

Despite the recent increase in the consumption level of the processed meat-byproducts, the health and safety issue has consistently been raised in the processes of production, distribution and consumption. The purpose of this study is to analyze and evaluate the microbiological hazard elements in the Korean sausage, "Sundae," to present not only the safety standard of meat by-product vendors based on HACCP (Hazard Analysis Critical Control Point), but also the quality control criteria and sanitary arrangements of small manufacturers. For the study, the microbiological hazards in 24 raw materials, 7 manufacturing processes, 40 facilities and tools, 17 workplace environment, and 12 workers were analyzed. The analysis revealed the hazardous elements in the initial stages with 6.28 and 4.07 log CFU/g of total aerobic count and coliforms, respectively, detected from the porcine blood and 3.23 log CFU/g of coliforms from the porcine small intestines. The result also showed that the total aerobic counts and coliforms in the process of mixing and filling process exceeds the standards in the hygiene guidelines by Natick with the total aerobic counts of 5.23, 5.45 log CFU/g, and the coliforms of 3.25, and 3.31 log CFU/g, respectively. Although the detected total aerobic count and the coliforms in the filling and washing rooms exceeded the standards, it was found that the total aerobic count was significantly reduced by 98% after cleaning and disinfecting and no coliforms was detected in any process thereafter. In order to achieve high level of safety in the manufacturing processes of Sundae, the separation of washing and disinfection room from the other sections and the sanitation control of the workers must be preceded, along with strict monitoring in the storage and distribution processes. The study raises necessity for additional studies for the safety evaluation of the processed meat-byproducts and further researches on the validity of the critical limits.

• Journal of Digital Convergence
• /
• v.10 no.10
• /
• pp.389-395
• /
• 2012

This descriptive study looks into the levels of BMI, dietary habits, body image, and eating attitudes which have a major impact on the obesity management of female college students. A total of 173 female college students from the same school participated in this study by filling out a self-administered questionnaire investigating actual conditions. The average age of the participants was 19.5 years old and the average BMI was $21.8kg/m^2$. There were statistically significant differences in dietary habit at home (t=2.957, p=.004), eating attitudes BMI (F=5.324, p=.006), actual body image within perceived body esteem and BMI (F=36.979, p=.000), level of state body esteem BMI (F=11.539, p=.000), level of eating attitudes BMI(F=5.324, p=.006). Among the relationships between variables, the higher the BMI, the higher the score for perceived body esteem and problems concerning eating attitudes became prevalent. The higher the actual body image score, the lower the state body esteem and problems concerning eating attitudes became prevalent. Therefore, there is a need for education that enhances positive body image and eating attitudes in order for female college students to manage obesity due to dietary habits.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.9
• /
• pp.3983-3990
• /
• 2012

The hazardous effects of heavy alcohol intake and smoking to body systems have been identified by numerous studies, and there is many influencing factors on alcohol intake and smoking choices. The aim of this study is to identify the correlation between alcohol intake and digit ratio (2D:4D), as well as smoking and digit ratio (2D:4D) in university students. Participants were 121 male and 314 female university students. After filling in questionnaire related alcohol and smoking history, 2nd and 4th finger lengths were measured on both hands using vernier callipers with photocopy. This study showed 2D:4D of the males was 0.95, and that of the females was 0.96. There was a significant difference between male and female in digit ratio. The digit ratio according alcohol intake level significantly differed in only women's left hand. The digit ratio according smoking level significantly differed in only men's left hand. Moreover, The digit ratio was negatively associated with alcohol intake and smoking. The results of this study suggest that the digit ratio (2D:4D) affected with fetal testosterone concentration is negatively related to alcohol intake and smoking. Therefore, the digit ratio would be used in preventive program of alcohol intake and smoking of adolescent, or in antialcoholism /smoking cessation program as a biological basic data.

• Journal of Korean Neurosurgical Society
• /
• v.43 no.6
• /
• pp.288-293
• /
• 2008

Objective : Bone cement leakage is a well-known potential complication of percutaneous vertebroplasty (PVP) in patients with osteoporotic compression fracture. Even though there has been a controversy in the efficacy of antecedent venography to prevent this complication, many authors have performed intra osseous venography before bone cement injection. The goal of this study was to classify the venous drainage patterns of spine before PVP, and compare their patterns at different vertebral levels. Methods : The authors retrospectively reviewed 1,042 intraosseous venographic patterns in 321 patients with 574 osteoporotic compression fractures during six-year period in one institution. To classify venogram patterns, we selected simple lateral X-ray of spine taken immediately after injection of the contrast dye. We classified the venography patterns according to contrast leakage pattern and leakage direction as follows; trabecular (TR), trabecular anterior (TA), trabecular posterior (TP), trabecular anterior-posterior (TAP), trabecular lateral (TL), venous anterior(VA), venous posterior (VP), venous anterior-posterior (VAP), soft tissue (ST). Also, we compared venogram patterns according to different spinal levels. Results : In overall, the most common pattern was TP type accounting for 37.4% (390/1042) of all intraosseous venograms. This is followed by TAP in 21.5%, TR 17.4%, TA 116%, TL 5.8%, ST 4.1%, VA 1.2%, VP 0.6%, and VAP 0.4% in descending order of frequency. According to the spinal level, TR and TAP types were most common in thoracic spine (T6-T10), TP type was most common in thoraco-Iumbar spine (T11-L2), and TP and TAP types were most common in lumbo-sacral spine (L3-S1). Contrast dye leakage to soft tissue such as psoas muscle or disc were detected in 43 (4.1%) venograms. Direct venous drainage without staining of vertebral body was found in 23 (2.2%) venograms. The 8.3% of thoracic venogram showed direct venous drainage. Thoracic level showed a more tendency of direct venous drainage than other spine levels (p<001). Conclusion : The authors propose a new classification system of intra osseous venography during PVP. The trabecular-posterior (TP) type is most common through all spine, and venous-filling (V) type was most frequent in thoracic spine. Further study would be necessary to elucidate the efficacy of this classification system to prevent bone cement leakage during PVP.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.21 no.1
• /
• pp.1-14
• /
• 2005

The purpose of this study was to assess the loading distributing characteristics of implant prosthesis of internal connection system(ITI system) according to position and direction of load, under vertical and inclined loading using finite element analysis (FEA). The finite element model of a synOcta implant and a solid abutment with $8^{\circ}$ internal conical joint used by the ITI implant was constructed. The gold crown for mandibular first molar was made on solid abutment. Each three-dimensional finite element model was created with the physical properties of the implant and surrounding bone. This study simulated loads of 200N at the central fossa in a vertical direction (loading condition A), 200N at the outside point of the central fossa with resin filling into screw hole in a vertical direction (loading condition B), 200N at the centric cusp in a $15^{\circ}$ inward oblique direction (loading condition C), 200N at the in a $30^{\circ}$ inward oblique direction (loading condition D) or 200N at the centric cusp in a $30^{\circ}$ outward oblique direction (loading condition E) individually. Von Mises stresses were recorded and compared in the supporting bone, fixture, and abutment. The following results have been made based on this study: 1. Stresses were concentrated mainly at the ridge crest around implant under both vertical and oblique loading but stresses in the cancellous bone were low under both vertical and oblique loading. 2. Bending moments resulting from non-axial loading of dental implants caused stress concentrations on cortical bone. The magnitude of the stress was greater with the oblique loading than with the vertical loading. 3. An offset of the vertical occlusal force in the buccolingual direction relative to the implant axis gave rise to increased bending of the implant. So, the relative positions of the resultant line of force from occlusal contact and the center of rotation seems to be more important. 4. In this internal conical joint, vertical and oblique loads were resisted mainly by the implant-abutment joint at the screw level and by the implant collar. Conclusively, It seems to be more important that how long the distance is from center of rotation of the implant itself to the resultant line of force from occlusal contact (leverage). In a morse taper implant, vertical and oblique loads are resisted mainly by the implant-abutment joint at the screw level and by the implant collar. This type of implant-abutment connection can also distribute forces deeper within the implant and shield the retention screw from excessive loading. Lateral forces are transmitted directly to the walls of the implant and the implant abutment mating bevels, providing greater resistance to interface opening.

• Economic and Environmental Geology
• /
• v.52 no.2
• /
• pp.189-197
• /
• 2019

HLW (High Level Radioactive Waste) is one of the problems that must be solved in the countries that implement nuclear power generation. Most countries that are concerned about HLW treatment are considering complete isolation from human society by disposing them deep underground. For perfect isolation, understanding the characteristics of underground rocks is very important. In particular, understanding the characteristics of discontinuity as a path way is one of the first things in order to predict the movement of exposed nuclear species to the surface. In this study, we used 500m underground core samples obtained from granite and gneiss area. The purpose of this study is to understand the characteristics of the discontinuities in each rock type and to analyze the properties of the joints in the underground relative to the surrounding environment. For this purpose, the types of discontinuities were classified and the distribution of each discontinuity were analyzed through visual analysis of the each sample obtained at 500m underground. This study can be used as a basic data for understanding the properties of discontinuities in the rock of the survey area and it can be also used as an important data for understanding the distribution characteristics of discontinuities according to the rock types.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.35 no.4
• /
• pp.342-351
• /
• 1990

Experiments were conducted to find out the possibilities of producing good quality seed of summer type soybean at Chuncheon, 74m above sea level and Jinboo, 600m above sea level in 1987. Local variety, Cheonan Jaelae was used. Seeds were sown June 25 harvested five times from 35 days after flowering with five days interval to 55 days. Vegetative period was longer in the early planting and high cool area, Jinboo, which resulted longer stem length than the late planting and in the plain area, Chuncheon. Pod number and 100 grain weight were shown more and heavier in Jinboo. Earlier planting and later harvesting resulted more pod number and heaveier 100grain weight. Grain yield was heigher in Jinboo, and earlier plainting shown more grain yield and its difference was greater in Jinboo. Long grain filling duration resulted more grain yield. Unripened seeds were produced more by earlier planting with earlier harvesting and earlier planting with late harvesting showed the high rates of pod and stem blight (Diaporthe Phaseolorum). Seed With high moisture content by early harvesting showed more rotten seeds in all planting dates production was more advantageous in the high cool area, Jinboo. Optimum planting date was between May 15 and June 5. Harvesting was desirable about 45-50 days after flowering with heigher germination rate seed yield.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.63 no.3
• /
• pp.229-238
• /
• 2018

The purpose of this study was to evaluate the effects of nitrogen fertilization amount and timing of application on protein content, dough properties, change in protein fraction, and bread loaf volume for Korean wheat cultivars, Baekkang, Joongmo2008, and Saekeumkang, for bread with a superior gluten composition during the grain filling stage. Protein content increased with an increase in the amount of N and timing of application. The SDS segmentation volume (SDSS) increased with an increase in N, but there was no effect of the timing of N application on SDSS. An increase in N amount and timing of application caused a difference in dough properties, such as water absorption, mixing time, and tolerance, among the cultivars. Soluble and insoluble polymeric and monomeric protein contents increased with an increase in N amount and timing of application the three Korean wheat cultivars. The effects of N amount and application timing on bread loaf volume (BLV) varied among the cultivars. The BLV of Saekeumkang increased regardless of the N amount and timing of application, but that of Baekkang and Joongmo2008 cultivars was reduced. However, there was a positive correlation between protein content with the addition of N fertilization and BLV. In addition, SDSS, mixing time, and protein fractions were positively correlated with BLV. Since the response of fertilizer conditions was different for each wheat cultivar, it is necessary to build a suitable fertilizing system for each of them. Additionally, since the environment is changing, such as abnormal climate during the maturing period, research is needed to establish appropriate fertilizer conditions for varieties of bread wheat.

• Horticultural Science & Technology
• /
• v.31 no.6
• /
• pp.720-725
• /
• 2013

When highly shrinkable materials such as coir dust are major component of root media, the degrees of compaction during container filling of root media severely influences the physical properties of root media. It results in the changes in total porosity (TP), container capacity (CC) and air-filled porosity (AFP). This research was conducted to secure the fundamental information in changes of soil physical properties as influenced by the compaction of root media during container filling. To achieve this, three root media were formulated by blending coir dust (CD) with expanded rice hull (CD + ERH, 8:2, v/v), carbonized rice hull (CD + CRH, 6:4) and ground and raw pine bark (CD + GRPB, 8:2). Based on the optimum bulk density, the amount of root media filled into 6.0, 7.5, 8.5, 10.5 and 12.5 cm were adjusted to 90, 100, 110, 120 and 130% based on the weight of root media. Then the changes in TP, CC, and AFP were measured. Elevation of the packing amount of root media in all sizes of pot resulted in the decrease of TP. But the decrease was more severe in CD + ERH and CD + CRH than those in CD + GRPB. The CC also decreased gradually as the packing amounts were elevated in three root media, but the decreases were severe as the container sizes became larger. The AFP decreased drastically by the elevation of the packing amount of root media in all sizes of pot. The AFP was the highest in CD + CRH medium when pot sizes were smaller than 7 cm, but that was the highest in CD + ERH when the pot sizes were larger than 8.5 cm among the 3 root media tested. In this research, the elevation of packing amount of three root media influenced more severely the AFP rather than CC. This result indicates that the packing amount should be controlled to maintain appropriate level of AFP because AFP rather than CC influence severely crop growth. The results obtained through this study can be used to predict the changes in physical properties of root media as influenced by packing amount in various sizes of pots.