• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2017년도 추계 학술논문 발표대회
• /
• pp.139-140
• /
• 2017

This technology employs a method of forming a single-ply PLUS waterproofing sheet layer comprised of applying a single-ply synthetic polymer layer on a vibrating structure (steel frame, RC) or an inclined surface by using a T joint lap-filling coil and an embedded metal coated sheet. The T - joint reinforcing lap-filling coil was used to block the ingress channel of the rainwater by applying the material in the vulnerable area where the three sides of the waterproof sheet overlapped. Conventional waterproofing techniques have a problem in that the waterproof sheet is pierced because the end portion of the waterproof sheet applied to the vertical portion is fixed by a nail, and the sealant applied to the end portion of the sheet cannot easily secure long-term waterproof durability due to the influence of the external environment. Therefore, the developed technology secured the waterproof durability against the vertical part by using the embedded metal sheet. In addition, automatic hot-air fusing is used to improve the quality of waterproof construction and point fixation method using fixed hardware. This is a technology that is not significantly restricted in the high degradation level regions of domestic waterproof construction environments in Korea such as low-temperature environment, wet floor.

• Restorative Dentistry and Endodontics
• /
• 제45권2호
• /
• pp.24.1-24.9
• /
• 2020

Objectives: It is known that bioactive materials interact with the dentin to undergo biomineralization. The exact role of moisture in this interaction is unknown. Here, we investigate the effects of dentin moisture conditions on the dislocation resistance of two bioactive root canal sealers (MTA Fillapex [Angelus Solucoes Odontologicas] and GuttaFlow BioSeal [Colténe/Whaledent AG]) at 3 weeks and 3 months after obturation. Materials and Methods: Mandibular premolars (n = 120) were prepared and randomly divided into 3 groups based on the dentin condition: group 1, dry dentin; group 2, moist dentin; group 3, wet dentin. Each group was divided into 2 subgroups for root canal filling: MTA Fillapex and GuttaFlow BioSeal. Dislocation resistance was evaluated by measuring the push-out bond strength at 3 weeks and 3 months. Failure modes were examined under a stereomicroscope. Data were statistically analyzed by Kruskal-Wallis test with a significance level of 5%. Results: Moist dentin resulted in higher bond strength values for both materials at both time points. This was significantly higher than wet and dry dentin for both the sealers at the 3 months (p < 0.05), while at 3 weeks it was significant only for GuttaFlow Bioseal. The different moisture conditions demonstrated similar trends in their effects on the dislocation resistance of the 2 root canal sealers. Conclusions: The dentin moisture conditions had a significant impact on its interaction with the bioactive materials tested. Maintaining moist dentin, but not dry or wet dentin, may be advantageous before the filling root canals with bioactive sealers.

• Environmental Analysis Health and Toxicology
• /
• 제27권
• /
• pp.5.1-5.10
• /
• 2012

Objectives: The purpose of this study was to assess the risk of ingestion exposure of lead by particle sizes of crumb rubber in artificial turf filling material with consideration of bioavailability. Methods: This study estimated the ingestion exposure by particle sizes (more than 250 um or less than 250 um) focusing on recyclable ethylene propylene diene monomer crumb rubber being used as artificial turf filling. Analysis on crumb rubber was conducted using body ingestion exposure estimate method in which total content test method, acid extraction method and digestion extraction method are reflected. Bioavailability which is a calibrating factor was reflected in ingestion exposure estimate method and applied in exposure assessment and risk assessment. Two methods using acid extraction and digestion extraction concentration were compared and evaluated. Results: As a result of the ingestion exposure of crumb rubber material, the average lead exposure amount to the digestion extraction result among crumb rubber was calculated to be $1.56{\times}10^{-4}$ mg/kg-day for low grade elementary school students and $4.87{\times}10^{-5}$ mg/kg-day for middle and high school students in 250 um or less particle size, and that to the acid extraction result was higher than the digestion extraction result. Results of digestion extraction and acid extraction showed that the hazard quotient was estimated by about over 2 times more in particle size of lower than 250 um than in higher than 250 um. There was a case of an elementary school student in which the hazard quotient exceeded 0.1. Conclusions: Results of this study confirm that the exposure of lead ingestion and risk level increases as the particle size of crumb rubber gets smaller.

• Restorative Dentistry and Endodontics
• /
• 제20권2호
• /
• pp.671-684
• /
• 1995

The purpose of this study was to compare the apical sealing ability, overfilling and obturation of lateral canals using two gutta-percha techniques: Thermafil obturators and cold lateral condensation. Eighty numbered epoxide blocks with one major and five lateral canals were divided into four experimental groups and obturated according to experimental groups. Four experimental groups were as follows: Group 1 : Filling with Thermafil plastic obturators and sealer(ThermaSeal) Group 2 : Filling with Thermafil plastic obturators only, without sealer(ThermaSeal) Group 3 : Fillng using lateral condensation with sealer(AH-26) Group 4 : Fillng using lateral condensation without sealer(AH-26) All the blocks were stored in 100% relative humidor at room temperature for 7 days. Each block was placed in centrifuge tube filled with India ink, and then centrifuged for 20 minutes at 3,000 rpm. Apical leakage was measured from the apical foramen to the most coronal level of dye penetration in millimeter under a stereoscope. The length of gutta-percha and sealer in each of the lateral canals was measured, too. The presence or absence of overfilling of gutta-percha and sealer was recorded. The data was analyzed by one-way ANOVA. The obtained results were as follows: l. Apical dye leakage was almost: not occurred in Group Willed with Thermafil and sealer) and Group 3(filled using lateral condensation with sealer), and there was no significant difference in linear leakage between two groups(p>0.01). 2. In both Thermafil and lateral condensation groups, linear leakage of Group I, 3(filled with sealer) was less than that of Group 2, 4(filled without sealer), and there was no significant difference in linear leakage between Group 1, 2, 3(p> 0.01). 3. Overfilling during obturation of Group 1, 2(filled with Thermafil) was more than Group 3, 4(filled using lateral condensation), and there was no significant difference between groups(p> 0.05). 4. Groups filled with Thermafil had significantly more gutta-percha than groups filled using lateral condensation in all lateral canals(p <0.01), the total length of gutta-percha and sealer found in all lateral canals were similar in Group 1 and Group 3.

• Restorative Dentistry and Endodontics
• /
• 제19권1호
• /
• pp.205-216
• /
• 1994

The purpose of this study is to evaluate of apical plug materials for the contral of extrusion and sealing ability of high-temperature thermoplasticized gutta-percha in plastic root canal blocks. Seventy seven plastic blocks with canal preformed were instrumented with # 50K file 1 mm beyond apical foramen. Blocks were randomly divided into 5 groups of 15 blocks each. Group 1 was filled by high-temperature thermoplasticized gutta-percha only. The another 4 groups were placed with apical plug materials each other and then remaining space was back filled with high temperature thermoplasticized gutta-percha Apical plug materials were used as follows; Group 2: Thermoplasticized gutta-percha (Thermoplasticized gutta-percha group) Group 3 :. Calcium hydroxide powder (Calcium hydroxide group) Group 4 : Silver point (Silver point group) Group 5 : Gutta-percha cone softened by chloroform (Gutta-percha cone group) All the blocks were stored in 100 % relative humidor at room temperature for 14 days. Filling material extruded was removed carefully and then weighed in analytic balance. Each block was placed in centrifuge tube filled with India ink, and then centrifuged for 20 minutes at 3,000 rpm. Apical leakage was measured from the apical foramen to the most coronal level of dye leakage in millimeter by two examiners under a stereoscope. The data were analysed statistically by Student's t-test The obtained results were as follows; 1. The amounts of material extruded through the foramen decreased in all of groups used apical plug materials (P<0.01). 2. Silver point group and gutta-percha cone group were similar linear leakage to high-temperature thermoplasticised gutta-percha technique only (P>0..5). 3. Calcium hydroxide group and thermoplasticized gutta-percha group showed more liner leakage than high-temperature thermoplasticized gutta-percha only (P<0.01, P<0.05). 4. High-temperature thermoplasticized gutta-percha technique with silver point and gutta-percha cone as apical plugs showed less linear leakage and less extrusion of filling material.

• 자원환경지질
• /
• 제55권6호
• /
• pp.737-760
• /
• 2022

고준위 방사성 폐기물(High-level radioactive waste; HLW)의 지질처분을 위해서는 심부 지하 환경에 대한 이해가 선행되어야 하며, 이는 지질학적, 수리지질학적, 지구화학적, 지질공학적 조사를 통해 가능하다. 우리나라는 HLW의 지질처분을 계획하고 있으나, 심부 지하 환경의 지구화학적 특성에 관한 연구가 부족한 편이다. 이에 본 논문에서는 지질처분 부지 선정을 위한 지구화학적 조사를 중심으로 선진국의 심부 지하수 연구 동향을 살펴봄으로써 앞으로 국내 수리지구화학 분야의 연구 과제를 도출하는데 참고하고자 하였다. 해외 8개 국가(미국, 캐나다, 핀란드, 스웨덴, 프랑스, 독일, 일본, 스위스)의 심부 지하 환경 조사 방법 및 결과와 함께 지질처분 부지 결정 과정과 향후 연구 계획을 살펴본 결과, 해외 선진국에서는 심부 지하 환경의 지구화학적 특성화를 위해 지하수 및 난대수층 내 간극수의 수화학과 동위원소(예: SO₄^2-의 ³⁴S, ¹⁸O, DIC의 ¹³C, ¹⁴C, H₂O의 ²H, ¹⁸O), 균열 충전광물(fracture-filling minerals), 유기물, 콜로이드, 산화-환원 지시자(예: Eh, Fe²⁺/Fe³⁺, H₂S/SO₄^2-, NH₄⁺/NO₃^-) 등을 조사하고 있으며, 이들 지구화학 자료의 통합 해석을 통해 해당 심부 환경이 지질처분에 적합한지를 평가하였다. 국내의 경우, 인공신경망을 이용한 Self-Organizing Map(자기조직화 지도), 다변량 통계 기반 M3 모델링(지하수 혼합 모델), 반응-경로 모델(reaction path model) 등을 이용하여 심부 지하수의 수화학적 유형 분류 및 진화 패턴 규명, 천부 지하수 혼합 영향, 균열 충전광물과 지하수화학 사이의 관계를 규명한 바 있다. 그러나 지질처분 부지를 선정하는데 있어 과학적 근거를 확보하기 위해 중요한 기타 지구화학 자료(예: 동위원소, 산화-환원 지시자, 용존유기물)가 매우 부족한 현실이며, 따라서 최적의 지질 처분지를 찾기 위해서는 지역별/유형별 심부 지하수에 대한 지구화학적 자료 구축이 요구된다.

• 성인간호학회지
• /
• 제18권1호
• /
• pp.136-145
• /
• 2006

Purpose: This study was performed to identify relationships among stress, hardiness, and the level of self-care in kidney transplant patients and use the results of this study as baseline data for developing self-care promotion programs. Method: Subjects were 41 patients who undergone a kidney transplantation surgery at least one month before and were receiving regular follow-up care via OPD. Four researchers interviewed each subjects by filling out questionnaires. Results: The mean score of the level of stress was 2.32(SD=0.54) on a 4 point scale and the mean score of hardiness was 4.68(SD=0.62) on a 6 point scale. The mean score of self-care among the subjects was 3.83(SD=0.55). There was statistically a significant positive relationship between selfcare and hardiness(r=0.42). Especially, relationships between self-care and commitment (r=.51) and control(r=.36) as the subdimensions of hardiness were significant. The item suggested as most stressful was economic burden and the item suggested as least stressful was sexual activity. Conclusion: Although transplant patients have various stressors, the positive self-care activities of the patients could be increased if the commitment and control were enhanced by proper intervention programs.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2015년도 추계 학술논문 발표대회
• /
• pp.87-88
• /
• 2015

A defect dispute surrounding an apartment building is in constant trouble, a defect consulting is necessary that objective and impartial for solving a defect. The defect dispute about a defect lawsuit is conducted in the order that filling of lawsuit, consulting order, defect inspecting, estimating a repairing cost, writing a consulting report, submitting a consulting report, and decision by court. Of these, a step of defect inspecting is extensively investigated an occurred defect that each defect index and type from each part and place. At this time, it is collected of many data and created many information. For this, it need to organize and manage. The study is a modeling of field investigation work process that second phase of defect inspecting step. A literature study is defined a work until level 2. This study is defined the work until level 3 to 4. In addition, the modeling can do for using a job name, a place to job, a job to do, and a person concerned about defect consulting case. The modeling is expected a contribution of improving a defect consulting process and systematizing a judgment standard.

• 한국생산제조학회지
• /
• 제23권3호
• /
• pp.230-236
• /
• 2014

Wafer level package technology is added to the surface of wafer circuit packages to create a semiconductor technology that can minimize the size of the package. However, in conventional packaging, warpage and fracture are major concerns for semiconductor manufacturing. We optimized the wafer dam design using a finite element method according to the dam height and heat distribution thermal properties. The dam design influences the uniform deposition of the image sensor and prevents the filling material from overflowing. In this study, finite element analysis was employed to determine the key factors that may affect the reliability performance of the dam package. Three-dimensional finite element models were constructed using the simulation software ANSYS to perform the dam thermo-mechanical simulation and analysis.

• 정보처리학회논문지B
• /
• 제9B권3호
• /
• pp.337-342
• /
• 2002

본 논문에서는 이진화 영상의 물체 분석에서 자주 사용되는 새로운 Labeling 알고리즘을 제안한다. 제안한 Labeling 알고리즘은 기존의 Labeling 과는 달리 복잡한 Equivalent Labeling Merging/Ordering이 필요하지 않으며 비재귀적인 Flood-filling에 의하여 1 pass에 Labeling이 이루어진다. 또한 Gray-level 이미지에 대해서도 쉽게 확장될 수 있으며, HIPR Image Library를 대상으로 실험한 결과 기존의 방법보다 2배 이상의 빠른 수행 속도를 보였다.