• 보존과학연구
• /
• 통권32호
• /
• pp.61-74
• /
• 2011

국내에서 토기 복원에 주로 사용하는 접착제 3종: Cemedine C, Loctite$^{(R)}$ 401$^{TM}$, Araldite Rapid Type와 메움제 3종: 석고, CDKI 520 A+B, Araldit$^{(R)}$ SV 427-2+HV 427-1의 제거효과에 대해 연구했다. 1차 실험에서 각각의 재료들을 여러 용제에 침적해 연화의 정도(Soften level)를 비교하고, 2차 실험은 연질토기 시료와 경질토기 시료에 재료들로 복원하여 침적법과 증기법의 효과를 비교했다. 1차 실험 결과 Cemedine C와 Loctite는 아세톤에 쉽게 녹았고, Plaster(석고)는 인산나트륨에 효과적으로 제거되었다. Araldite Rapid Type와 CDKI 520과 SV427은 Dichloromethan, Tetrahydrofuran, DMX (Dichloromethan + Methanol + Xylene)에 효과적으로 제거되었다. 2차 연구는 1차 연구를 토대로 제거에 효과적이라 판단되는 용제를 각각 침적법과 증기법으로 제거하였다. 대부분의 시료에 적용된 재료들은 침적법으로 10분 이내에, 증기법으로는 약 24시간 후에 제거되었다.

• 한국산업보건학회지
• /
• 제21권2호
• /
• pp.90-98
• /
• 2011

Objectives: The aim of this study was to evaluate the level of urinary mercury and analyze which factors would affect urinary mercury concentration among dental hygienists in dental clinics. Methods: This study conducted by questionnaire and detection of urinary mercury concentration of 268 dental hygienists working in dental clinics from July to August of 2009. Data collected from two hundred and thirty-five dental hygienists were analyzed by the geometric mean (GM). Analytical results of urine samples with less than 0.3 g creatinine/L and greater than 3g creatinine/L were excluded from statistical analysis. Results: Urinary mercury concentration of 235 dental hygienists showed the geometric distribution. The arithmetic and geometric means of urinary mercury concentration were $0.996{\mu}g/g$ creatinine and $0.755{\mu}g/g$ creatinine, respectively. From multiple regression analysis, the number of amalgam filling, the consumption frequency of raw fish and the number of amalgam handling in current workplace was revealed as increasing factors of urinary mercury concentration. Conclusions: The level of urinary mercury in dental hygienists was higher than in general Korean population. The number of amalgam filling, the consumption frequency of raw fish and the number of amalgam handling in current workplace was revealed as increasing factors of urinary mercury concentration. Therefore using resin materials instead of amalgam in dental clinics is highly desirable.

• Advances in aircraft and spacecraft science
• /
• 제3권3호
• /
• pp.351-366
• /
• 2016

Macroperforations improve the sound absorption performance of porous materials in acoustic cavities and in waveguides. In an acoustic cavity, enhanced noise reduction is achieved using porous materials having macroperforations. Double porosity materials are obtained by filling these macroperforations with different poroelastic materials having distinct physical properties. The locations of macroperforations in porous layers can be chosen based on cavity mode shapes. In this paper, the effect of variation of macroporosity and double porosity in porous materials on noise reduction in an acoustic cavity is presented. This analysis is done keeping each perforation size constant. Macroporosity of a porous material is the fraction of area covered by macro holes over the entire porous layer. The number of macroperforations decides macroporosity value. The system under investigation is an acoustic cavity having a layer of poroelastic material rigidly attached on one side and excited by an internal point source. The overall sound pressure level (SPL) inside the cavity coupled with porous layer is calculated using mixed displacement-pressure finite element formulation based on Biot-Allard theory. A 32 node, cubic polynomial brick element is used for discretization of both the cavity and the porous layer. The overall SPL in the cavity lined with porous layer is calculated for various macroporosities ranging from 0.05 to 0.4. The results show that variation in macroporosity of the porous layer affects the overall SPL inside the cavity. This variation in macroporosity is based on the cavity mode shapes. The optimum range of macroporosities in poroelastic layer is determined from this analysis. Next, SPL is calculated considering periodic and nodal line based optimum macroporosity. The corresponding results show that locations of macroperforations based on mode shapes of the acoustic cavity yield better noise reduction compared to those based on nodal lines or periodic macroperforations in poroelastic material layer. Finally, the effectiveness of double porosity materials in terms of overall sound pressure level, compared to equivolume double layer poroelastic materials is investigated; for this the double porosity material is obtained by filling the macroperforations based on mode shapes of the acoustic cavity.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제44회 동계 정기학술대회 초록집
• /
• pp.420-420
• /
• 2013

We investigated oxygen plasma effect on defect states near the interface of AlGaN/GaN High Electron Mobility Transistor (HEMT) structure grown on a silicon substrate. After the plasma treatment, electrical properties were evaluated using a frequency dependant Capacitance-Voltage (C-V) and a temperature dependant C-V measurements, and a deep level transient spectroscopy (DLTS) method to study the change of defect densities. In the depth profile resulted from the temperature dependant C-V, a sudden decrease in the carrier concentration for two-dimensional electron gas (2DEG) nearby 250 K was observed. In C-V measurement, the interface states were improved in case of the oxygen-plasma treated samples, whereas the interface was degraded in case of the nitrogen-plasma treated sample. In the DLTS measurement, it was observed the two kinds of defects well known in AlGaN/GaN structure grown on sapphire substrate, which have the activation energies of 0.15 eV, 0.25 eV below the conduction band. We speculate that this defect state in AlGaN/GaN on the silicon substrate is caused from the decrease in 2DEG's carrier concentrations. We compared the various DLTS signals with filling pulse times to identify the characteristics of the newly found defect. In the filling pulse time range under the 80 us, the activation energies changed as the potential barrier model. On the other hand, in the filling pulse time range above the 80 us, the activation energies changed as the extended potential model. Therefore, we suggest that the found defect in the AlGaN/GaN/Si structure could be the extended defect related with AlGa/N/GaN interface states.

• Journal of Information Display
• /
• 제4권4호
• /
• pp.19-24
• /
• 2003

By using vacuum in-line driving and photoluminescence measuring system, we have examined the electrical and optical characteristics of plasma display panel produced by vacuum in-line sealing technology. In addition, the relationship between luminous efficiency and base vacuum level before filling discharge gas was analyzed. In the case of base vacuum level of $1.33{\times}10^{-1}$ Pa, the firing voltage of a 2-inch diagonal PDP panel was ranged from 312 to 343 V depending on the discharge gas pressure of $2.667{\times}10^4$ to $4{\times}10^4$ Pa at room temperature, Whereas in the case of $1.33{\times}10^{-4}$ Pa, the firing voltage was reduced by 40 V and luminescence was improved slightly.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2004년도 유체기계 연구개발 발표회 논문집
• /
• pp.614-625
• /
• 2004

The main purpose of this study is to get flowrate coefficient 'q' and to study characteristics of flowrate of screw pump. This study is based on Muskin's formula and depends on the computer simulation. The results of study are as follows. 1. Flowrate coefficient will reduce according to increase of inclination. The larger the pitch ratio is and the smaller the diameter ratio is, the more coefficient reduces. 2. As a rule, the coefficient increases according to reduction of the diameter ratio, but the coefficient tends to reduce when the ratio is less than 0.45. So, in actual application, it is recommended that the ratio should be above 0.45. 3. If the pitch ratio increases, the coefficient increases in case of small inclination and decreases in case of large inclination. 4. The coefficient increases according to number of windings. Especially, singles winding is not used in actual application because it has too small coefficient. 5. The coefficient decreases when the influent water level falls. Flowrate is almost zero when the water level is below $40\%$ of Filling Points.

• 보건교육건강증진학회지
• /
• 제20권2호
• /
• pp.95-112
• /
• 2003

Objectives： Oral health care program for the elementary school children (ESOHCP) should be met the first priority because dental caries are highly sensitive and prevalent among them. This study was performed to enhance the efficiency of ESOHCP, and their oral health promotion. Methods： The Subjects were 346 students (3rd grade 163, 6th grade 185) of one elementary school in Busan. Dental IQ and actual oral health status； the decayed, mixing and filling teeth were checked through questionnaire and oral health examination from April to June 2002. Dental IQ was presented out of one hundred, and data analysis was done using SAS (ver 8.1) program. Results： The students' cognitive level about the causative and preventive factor of dental caries was relatively high. However, the practical aspects of preventive behavior - tooth brushing； three times per day (20％), three minutes per time (22％), oral health examination； one time per three months (10％) left much to be desired. And, only 27％ of the subjects had experienced in school oral health education. The mean level of dental IQ was 79 out of 100, and 51 ％ and 42％ of them had the decayed and teeth with filling, respectively, with the rate of DMFT 82％, DT 43％, FT 57％. The level of dental IQ was higher in case of having his (her) own tooth brush (p＝0.072), standard tooth brushing (p<0.001) three times per day, post meal, three minutes per time, present experience of oral health examination (p<0.001) and dental clinic visit (p<0.001). The grade of caries was more serious in case of 6th grade (p＝0.059), an absence of his (her) own tooth brush (p＝ 0.090), present experience of oral health examination (p＝0.021), and an absence of regular dental clinic visit (p＝0.003). The frequency of oral health examination (γ＝ 0.620), tooth brushing； times per day (γ＝0.445), post meal (γ＝0.355), expending times per brushing (γ＝0.352), right cognition to the treatment of caries (γ＝0.401), positive attitude to dental treatment (γ＝0.387), the frequency of dental clinic visit for the past one year (γ＝0.152) showed significant correlation with dental IQ. In the multivariate analysis, dental IQ was influenced by the frequency of oral health examination, right cognition to the cause of caries, times of teeth brushing per day, right cognition to the treatment of caries, etc., with adjusted R2＝0.857. Conclusion： Though the students' cognitive level about the causative and preventive factor of dental caries was high, the practical aspects of preventive behavior left much to be desired. Ant the current ESOHCP considered to be still inefficient. However, frequent dental visits had apparent correlation with hish level of dental IQ. The specialized and practical program should be needed for the efficient ESOHCP. Harmonized effort from educational, health and dental society is essential.

• 농약과학회지
• /
• 제19권1호
• /
• pp.14-21
• /
• 2015

인삼의 재배환경에 따른 잔류특성을 조사하고 살포 농약의 행적을 알아보기 위하여 5년근 인삼포에 덮개 유무와 인삼 줄기의 움직임으로 생긴 구멍을 흙으로 메우는 방법 여부의 서로 다른 조건에서 azoxystrobin (20% SC)을 안전사용기준의 기준량과 배량농도로 수확 7일전까지 10일 간격으로 4회 살포하였으며, 행적 구명 시험을 위해서는 기준량을 1회 살포한 후 분석시료를 채취하였다. 재배기간 중 덮개를 설치하고 구멍을 막은 경우가 잔류량이 낮아 덮개 설치와 구멍 메우기가 잔류량 감소에 기여하는 것으로 판단되었다. 인삼에 살포한 azoxystrobin은 비표면적이 큰 잎에 가장 많이 분포하였으며, 살포시기가 인삼의 수확기에 근접할수록 잎 중 잔류량은 감소하였으나 토양표면의 검출량은 증가하였다. 뇌두를 포함한 인삼 뿌리 중 시험농약의 분포율은 약 0.1%이었으며, 인삼 섭취 시 뇌두를 제거할 경우 12.7-20.4%(평균 16.6%)의 잔류농약 섭취를 감소시키는 효과가 있었다.

• 한국지능정보시스템학회:학술대회논문집
• /
• 한국지능정보시스템학회 2001년도 The Pacific Aisan Confrence On Intelligent Systems 2001
• /
• pp.343-351
• /
• 2001

World practice is evidence of that computer systems of an intellectual support of medical activities bound up with examination of patients, their diagnosis, therapy and so on are the most effective means for attainment of a high level of physician\`s qualification. Such systems must contain large knowledge bases consistent with the modern level of science and practice. To from large knowledge bases for such systems it is necessary to have a medical ontology model reflecting contemporary notions of medicine. This paper presents a description of an observation ontology, knowledge base for the physician of general tipe, architecture, functions and implementation of problem independent shell of the system for intellectual supporting patient examination and mathematical model of the dialog. The system can be used by the following specialist: therapeutist, surgeon, gynecologist, urologist, otolaryngologist, ophthalmologist, endocrinologist, neuropathologist and immunologist. The system supports a high level of examination of patients, delivers doctors from routine work upon filling in case records and also automatically forms a computer archives of case records. The archives can be used for any statistical data processing, for producing accounts and also for debugging of knowledge bases of expert systems. Besides that, the system can be used for rise of medical education level of students, doctors in internship, staff physicians and postgraduate students.

• Restorative Dentistry and Endodontics
• /
• 제23권2호
• /
• pp.682-689
• /
• 1998

The purpose of this study was to evaluate the sealing ability of the Microseal$^{(R)}$, which was new obturation system made by Tycom company, U.S.A. Forty-five extracted single-rooted human teeth were resected at cemento-enamel junction and divided three groups. All canals were prepared using Profile system, and then each group was obturated by lateral condensation technique (group 1), vertical condensation technique (group 2) and Microseal$^{(R)}$ condensation technique (group 3) with root canal sealer. Teeth were immersed in resorcinol-formaldehyde resin for 5 days at $4^{\circ}C$ and the resin was allowed to polymerize completely for 4 days at room temperature. Teeth were resected horizontally at 1 mm (level I), 2 mm (level II), 3 mm (level III) from the anatomical root apex using low speed microtome and examined with Image analyzer (IBASR, Zeiss co., Germany.) at ${\times}25$ magnification. The gab between the canal wall and the filling material, which was filled with the resin, was measured at each of the three levels. Each ratio of leakage was expressed percentage by calculating the ratio of the area of the resin to the total area of the canal and was analyzed statistically (one-way ANOVA). The results were as follows; 1. The mean ratio of leakage (%) was 6.46% at group 1, 3.06% at group 2, 11.27% at group 3. 2. When evaluating the ratio of leakage at the three levels, there was level I> level II> level III in all groups. Especially, the difference between level I and level III was statistically significant (p<0.05). 3. When evaluating the ratio of leakage at the three groups, there was group 3> group 1> group 2 at all levels. Especially the difference between group 2 and group 3 was statistically significant (p<0.05).