• Journal of the Korean Wood Science and Technology
• /
• v.46 no.1
• /
• pp.107-113
• /
• 2018

In this study, the 3D printer filaments were manufactured by using the representative eco-friendly material, bio-composite. Bio-composites were made by incorporating biodegradable polymer of poly lactic acid (PLA) as the matrix and bamboo flour as the filler. The bamboos which were used in this experiment are Phyllostachys bambusoides, Phyllostachys nigra var. henonis, and Phyllostachys pubescen grown in Damyang district in Korea, and the mixture ratio between bamboo flour and PLA were set 10/90, 20/80, 30/70 by weight standard. Also, tensile strength of bamboo/PLA bio-composites manufactured with three kinds of bamboo were estimated and compared. In this result, the highest estimated bio-composites was Phyllostachys bambusoides flour/PLA which mixture ratio was 10/90, that is, it was the most suitable bamboo/PLA bio-composites for manufacturing 3D printer filament.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.36 no.1
• /
• pp.39-42
• /
• 2010

Maxillary sinus lift and bone graft are used to reconstruct atrophic maxilla molar area for endosseous dental implants. Many different grafting materials and techniques can be used for maxillary sinus bone graft. Bio-$Oss^{(R)}$ has been proposed as bone substitute and successfully utilized as osteoconductive filler. Platelet rich plasma (PRP) is an autologous material with many growth factors, such as PDGF, TGF-$\beta$, IGF, VEGF, facilitating bone healing process. And Platelet poor plasma (PPP) is the by-product in procedure of producing PRP. Six rabbits were used as experimental animal. Both maxillary sinus were grafted with Bio-$Oss^{(R)}$ and PRP, and Bio-$Oss^{(R)}$ and PPP. Rabbits were sacrificed at 4, 8 and 12 weeks. The grafting sites were evaluated by histomorphometric analysis. As a result, using PRP showed excellent bone formation in the early stage, but no further significant effect after that. In late stage, the ability of bone formation of using PRP was even worse than using PPP. The further studies need to be considered in this case.

• Design & Manufacturing
• /
• v.10 no.3
• /
• pp.14-19
• /
• 2016

Thermally or electrically conductive filler reinforced polymer composites are extensively being developed as the demand for light weight material increases rapidly in industiral applications need good conductivity such as heat sink of the electronics or light. Carbon or ceramic materials like graphite, carbon nanotube or boron nitride are typical conductive fillers with good thermal or electical conductivity. Using these conductive fillers, the polymer composites in the market show wide range of thermal conductivity from approximately 1 W/mK to 20 W/mK, which is quite enhanced considering the thermal conductivity lower than 0.5 W/mK for most polymeric materials. The practical use of these composites, however, is yet limited to specific applications because most composites are still not conductive enough or too difficult to process, too brittle, too expensive for higher conductivity. For practical use of conductive composite, the thermal conductivity required depending on the heat releasing mode are studied first for simplified unit cooling geometry to propose thermal conductivities of the composites for reasonable cooling performance comparing with the metal heat sink as a reference. Also, as a practical design for heat sink based on polymer composite, composite and metal sheet hybrid structures are investigated for LED lamp heat sink and audio amplication module housing to find that this hybrid structure can be a good solution considering all of the cooling performance, manufacturing, mechanical performance, cost and weight.

• Journal of Power System Engineering
• /
• v.13 no.5
• /
• pp.95-102
• /
• 2009

A steam generator (boiler) in thermal power plants, consisting of more than 30,000 parts and components, can lead to the plant shutdown with damage to even the small part of the components; esp., like weld failures on boiler tubes. Consequently it is greatly demanded to improve the quality of the weld on the boiler tube for the stable operation of the power plants. Because of the feature of the welding, which is done past by melting the work pieces and adding a filler material that cools to become a strong coalescence, there is a great possibility that weld failures take place. As a result, it is regulated to make a non-destructive testing, like radiography test, to detect defects and flaws in the weld. The current film radiography test provides a lower image quality exceeding 2.0% of a basic quality level for a penetrameter, it is very likely to fail to detect micro defect. As a result, the prevention for the boiler tube failure has not been made effectively. In this study, computed radiography technology has been applied as a digital radiography test to the boiler tube weld, and Se-75 radiation source was used to improve the image quality, instead of Ir-192 source. As a result of this study, it is proven to save the time and cost for test and to enhance the quality level of penetrameter penetrating image, which enables to upgrade the quality of radiography test to the boiler tube weld.

• Composites Research
• /
• v.31 no.1
• /
• pp.8-11
• /
• 2018

Sheet molding compound (SMC) is one of the most economical fiber reinforced composite fabrication processing for automotive applications. In this study, we studied the optimum formulation for the production of SMC which shows low specific gravity without lowering the mechanical properties by using glass bubble (GB) which is a low specific gravity filler and glass fiber (GF) as a reinforcing material. The tensile strength increased with the increase of the GF in the SMC, and the specific gravity decreased with the increase of the GB. The synergistic effect of improving the mechanical properties as the specific gravity is lowered is found in the optimum formulation. The synergy effect was confirmed by the internal structure analysis that the dispersion effect of the crack propagation of the GB and the improvement of the binding force between the fiber and the matrix due to the incorporation of the GB.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.34 no.3
• /
• pp.763-771
• /
• 2014

Recently, a huge amount of sulfur has been produced as a byproduct of petroleum refining processes in Korea. Sulfur concrete is made of modified sulfur binder instead of cement paste, which has advantages of reducing $CO_2$ emission from cement industry as well as utilizing surplus sulfur. Also, sulfur concrete is a sustainable material that can be repetitively recycled. In this study, the physical properties of sulfur concrete are experimentally investigated. From the test results, sulfur concrete showed compressive strengths higher than at least 50MPa. Also, the unit weight, modulus of elasticity and splitting tensile strength of sulfur concrete was similar to that of Portland cement concrete (PCC). The coefficient of thermal expansion of sulfur concrete was a little larger than that of Portland cement concrete and sulfur concrete with mineral filler is helpful to lower the coefficient of thermal expansion. recycled aggregate sulfur concrete resulted in a slight reduction in the compressive strength, but sulfur concrete with recycled aggregate can achieve the high strength characteristics.

• Proceedings of the KWS Conference
• /
• 2009.11a
• /
• pp.59-59
• /
• 2009

The influences of B and Si in the filler metals on microstructure and isothermal solidification during transient liquid-phase (TLP) bonding of a nitrogen-containing duplex stainless steel with MBF-30 (Ni-4.5wt.%Si-3.2wt.%B) and MBF-35 (Ni-7.3wt.%Si-2.2wt.%B), were studied at the temperature range of $1030-1090^{\circ}C$ with various times from 60 s to 3600 s under a vacuum of approximately $10^{-5}$ Torr. In case of the former, BN, $Ni_3B$ and $Ni_3Si$ precipitates were formed in the bonding region. BN and $Ni_3Si$ secondary phases were present in the joint for the latter case. The formation of $Ni_3B$ within the joint centerline is dependent on B content. The morphology of $Ni_3Si$ is dominated by Si concentration. A difference between the times for complete isothermal solidification obtained by the experiments and the conventional TLP bonding diffusion model was observed when using MBF-35. According to the simulated results, the isothermal solidification completion time for MBF-35 case was smaller than that in MBF-30. However, this experimental value obtained using MBF-35 was notably larger than that obtained using MBF-30. Isothermal solidification of liquid MBF-30 is controlled by the first isothermal solidification regime dependent on B diffusion model, whereas that of liquid MBF-35 experiences two isothermal solidification regimes and is mainly controlled by the second isothermal solidification dependent on Si diffusion model. In addition, only if Si content exceeds a critical value, the slower 2nd solidification regime will commence.

• Journal of the Korean Society of Laryngology, Phoniatrics and Logopedics
• /
• v.16 no.2
• /
• pp.129-134
• /
• 2005

Background and Objectives : Artecoll(R) is an injectable soft tissue filler, which is a suspension of polymethylmethacrylate microspheres in $3.5\%$ bovine collagen solution. The authors aimed to determine the clinical of Artecoll of Artecoll(R) as an injection material into the vocal fold to correct the glottal insufficiency caused by unilateral vocal cord paralysis. Materials and Methods : Forty-one consecutive patients with unilateral vocal cord paralysis received percutaneous Artecoll injections under local anesthesia. Acoustic, aerodynamic and stroboscopic analyses were prospectively provided before, 1 week and 3 months after injection. Perceptual GRBAS grading by speech language pathologists and subjective ratings of the hoarseness and aspiration by the patients were also obtained. Results : Aerodynamic parameter(maximal phonation time) were significantly improved after the injection (p<0.05). Acoustic parameters (jitter and shimmer) were improved at the 3rd month follow-up. GRBAS uading and patients own subjective scaling of hoarseness and aspiration also showed significant improvement (p<0.05). Early or delayed significant side effects were not observed. Conclusion : Vocal fold injection with Artecoll is a convenient, safe and useful method of temporarily correcting the glottal insufficiency. Further long-term follow-up studies will answer the usefulness and safety of the Artecoll injection laryngoplasty.

• Applied Chemistry for Engineering
• /
• v.9 no.4
• /
• pp.608-613
• /
• 1998

The purpose of this experiment was the physical properties of rubber compounds with DPCB and pure carbon black. Si-O peak in the silcia surface was observed at the range of wavenumber from 1,100 to 1,200 in the DPCB by FT-IR analysis. Cure rate of rubber compounds containing DPCB and organic silane coupling agent were (Si69) delayed compared with those containing pure carbon black. 300% modulus and interaction coefficient of DPCB with silane coupling agent were higher than those of pure carbon black and PICO weight loss amount showed constant value. It was found that $0^{\circ}C$ tan$\delta$ of rubber compounds with DPCB was larger than those of pure carbon black at 2.0% silane coupling agent based on 50 phr DPCB and $60^{\circ}C$ tan$\delta$ of rubber compounds with DPCB decreased as increasing the usage coupling agent. Consequently, it is postulated that DPCB is strong candidate material for lowering rolling resistance under constant abrasion resistance.

• Journal of the Korean Ceramic Society
• /
• v.36 no.12
• /
• pp.1350-1355
• /
• 1999

Sintering characteristics and dielectric properties of low temperature sinterable Glass/Ceramic dielectric materials were investigated. The dielectric materials which were developed for microwave frequency applications consist of SiO2-TiO2-Bi2O3-RO system(RO:BaO-CaO-SrO) crystallizable glass and Al2O3 as a ceramic filler. Sintering experiments showed that no more densification occurred above 80$0^{\circ}C$ and bulk density and shrinkage depended on Al2O3 content only. Results of dielectric measurements showed that $\varepsilon$r Q$\times$f and $\tau$f of the material containing 30wt% Al2O3 were 17.3, 600 and +23 ppm respectively. Those values for 45 and 60wt% Al2O3 samples were 11.6, 1400, +0.7 ppm and 7.2, 2000, -8.5 ppm, repectively. The results clearly showed that the Glas/Ceramic materials of present experiment decreased in $\varepsilon$r and increased in $\times$f value and changed from positive to negative value in $\tau$f value with the increasement of Al2O3 content.