• Applied Microscopy
• /
• v.21 no.1
• /
• pp.46-62
• /
• 1991

The intermediate filament is one of the most important constituents of the intracytoplasmic cytoskeleton microtubule, actin, myosin and intermediate filament. It is composed of keratin, desmin, vimentin, neurofilament and glial filament, and has important role as a cellular marker, epithelial or mesenchymal origin. So it will be important to differentiated from some poorly or undifferentiated neoplasm to provide adequate therapeutic modalities. This study was performed by using immunohistochemical staining and electron microscopic observation to find out intermediate filaments of epithelial and non-epithelial tumor cells evaluate the degree of differentiation in tumors and therefore to provide some diagnostic and therapeutic modalities. The materials consisted of 83 epithelial and non-epithelial elements bearing 23 normal control, 28 epithelial tumors, and 32 non-epithelial tumors, that are resected for definite treatment at Chosun University Hospital from June, 1988 to June, 1990. Immunohistochemical stain for keratin, desmin and vimentin, and electron microscopic study were performed in all cases. The results obtained were as follows. 1. Immunohistochemical stain for intermediate filament were very useful diagnostic aid for differentiated epithelial tumor to non-epithelial tumor in diagnostic neoplasia. 2. In the electron microscopic finding, the size of intermediate filaments were possible differentiated to cell components of epithelial tumor and non-epithelial tumors.

• Textile Coloration and Finishing
• /
• v.8 no.6
• /
• pp.33-39
• /
• 1996

The purpose of this study was to investigate the structural characteristics, mechanical properties, and stress-relaxation behavior of PET filament, which were prepared at various spinning speeds(1650, 3300, 4500, 5000, 5500, and 6000 m/min) and anneal(12$0^{\circ}C$, 20 min & 15$0^{\circ}C$, 40 min). In 4500 m/min of spinning speed the crystallinity, crystallite size, and degree of orientation of PET filament rapidly increased. By increasing spinning speed, the temperature dependence of stress-relaxation sharply decreased. Same results were obtained from heat-treated samples. As a result, activation energy for stress-relaxation increased with the crystallinity and spinning speed.

• Proceedings of the KIEE Conference
• /
• 2000.07b
• /
• pp.834-836
• /
• 2000

The round HTS wire is easier to handle than the rectangular HTS tape. This paper describes the coupling losses of the round HTS wires by finite element method. Effect of filament arrangement and filament size of the round HTS wire are considered. Three types of filaments arrangement, one and double layer radial filaments and Multi-filament, are considered. Calculation results show that coupling losses of the one layer filaments round HTS wire vary only a little with the direction of external magnetic field.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.5 no.1
• /
• pp.11-16
• /
• 1972

During the period from 1966 to 1968, total catches of Spanish mackerel averaged 6,000 to 7,000M/T per annual in Korea, and approximately 70 per cent of this amount was captured by drift nets. In an effort to improve the efficiency of drift nets, some experiments were conducted in 1969 to investigate the selectivity of material and mesh sizes. Seven different mesh sizes (80,85,95,100,105,110 and 115 mm) of both multi- and mono-filament netting were used, and the following results were obtained : 1, The body weight of Spanish mackerel taken with the seven different mesh sizes ranges from 0.5kg to 2.9kg, and the mode of body weight consists of three groups, 1kg ($21%$), 1.3kg($15\%$) and 1.5kg($19\%$). 2. For multi-filament net, 80 to 105mm mesh sizes were suitable to catch those three groups, and a little smalter than these for mono-filament net. 3. For Spanish mackerel only, the mono-filament material proved to have 1.5 times better selectivity than multi-filament : however, the latter proved superior for miscellaneous fish species due to its different size and shape. 4. Multi-filament net showed better selectivity for smaller species than mono-filament. (and mono-filament in general indicated opposite phenomenon.)

• Journal of the Korean Society of Industry Convergence
• /
• v.2 no.1
• /
• pp.27-33
• /
• 1999

Effects of spinning speed and draw ratio on structure and mechanical properties of PP filament. A The crystalline structure and mechanical properties of uniaxially deformed polypropylene filament has been examined by XRD, birefringence, UTM and density method. Uniaxially deformed PP filament was prepared of various spinning speeds (300, 600, 900m/min.) and draw ratio(x2, x3, x4). From the results of these studies, it found the following facts. Firstly, it was found that the crystallinity and crystallite size (110plane) of the samples were increased with increasing of spinning speed and draw ratio, especially, it was rapidly increased between as spun yarn and 2 times draw ratio. Secondly, birefringence value was increased with increasing of spinning speed and draw ratio. The mechanical properties of initial modulus, tensile strength were increased with increasing of spinning speed and draw ratio also, but the degree of elongation decreased as spinning speed and draw ratio.

• Elastomers and Composites
• /
• v.55 no.2
• /
• pp.108-113
• /
• 2020

Wear particles of the model tread compounds for bus and truck tires were made using a laboratory abrasion tester and characterized based on their size distributions, shapes, and crosslink densities. The influence of the carbon black contents and rubber compositions (NR= 100 and NR/BR= 80/20) on the production of wear particles was investigated. The wear particles were separated according to size using a sieve shaker. The shape properties of the wear particles were analyzed using an image analyzer and scanning electron microscopy (SEM). Their shapes were observed as tiny stick cookies or sausages with bumpy surfaces. The particle size distribution tended to be smaller with increasing carbon black content. Moreover, the particle size distributions of the NR = 100 samples were larger than that of the NR/BR blend samples. There were different filaments in the wear particles. The filament diameters tended to be thinner with increasing carbon black content. The crosslink density increased with increasing carbon black content, and the crosslink densities of the NR= 100 samples were lower than those of the NR/BR blend ones. The particle size distribution tended to be smaller with increasing crosslink density. Based on the experimental results, the wear particles can be produced by detaching debris from the main body through repetitive strain and recovery.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.15 no.3
• /
• pp.213-220
• /
• 2005

Penetration and health effect of fibers was related with their diameters and length. The purpose of this study is to characterize and compare the diameter and length of airborne man-made mineral fibers(MMMF) or synthetic vitreous fibers in the related industries. The average fiber length of the continuous filament glass, rock wool, refractory ceramic, and glass wool fibers production industries approximately 27, 28, 35, $50-105{\mu}m$. Airborne glass fibers were longest in all the type of MMMFs. The average diameters of airborne fibers generated from refractory ceramic, rock wool, glass wool, continuous filament glass fibers production industries were approximately 1.0, 1.6, 1.5-4 and $10{\mu}m$, respectively. The percentages of respirable fibers(<$3{\mu}m$) were 94% for RCFs, 73% for rock wool fibers, 61.0% for glass fibers, and 1.6% for filament glass fibers. The length of glass fibers were the longest in all types of fibers, and length of the others were similar. The refractory ceramic fibers were smallest in diameters and highest in fraction of respirable fibers.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2011.11a
• /
• pp.472-476
• /
• 2011

This paper presents the results of theoretical analysis and experimental test to verify the size effect on the fiber strength of filament wound pressure vessel. As a test method, a series of fully scaled hoop ring tests with filament wound carbon fiber-epoxy has been conducted. Test results showed remarkable size effect on fiber strength. And, as an analytical method, the WWLM(Weibull weakest link model) and SMFM(sequential multi-step failure model) were considered and compared to hoop ring test data. The analysis results showed significantly lower fiber strength value than that of test data. Through the modification of length size effect, modified SMFM is suggested. The fiber strengths from modified SMFM showed good agreement with test data.

• Bulletin of the Korean Chemical Society
• /
• v.12 no.5
• /
• pp.468-473
• /
• 1991

Viscoelastic properties of PET filament fibers on stress relaxation were investigated in the solvents of $H_2$O, 0.05% NaOH and 50% DMF using an Instron (UTM4-100 Tensilon) with solvent chamber. The theoretical stress relaxation equation derived by applying the Ree-Eyring's hyperbolic sine law to dashpot of three element non-Newtonian model was applied to the experimental stress relaxation curves, and the model parameters $G_1,G_2$, ${\alpha}$ and ${\beta}$ were obtained. By analyzing temperature dependency of the relaxation time, the values of activation entropy, activation enthalpy and activation free energy for flow in PET filament fiber were evaluated, the activation free energy being about 25.7 kcal/mol. The self diffusion coefficient and hole distance were obtained from parameters ${\alpha}$, ${\beta}$ and crystallite size in order to study the self diffusion and the orientation of crystallites in amorphous region and the effect of solvent.

• Journal of Sericultural and Entomological Science
• /
• v.36 no.2
• /
• pp.124-129
• /
• 1994

In order to investigate the possibility of fine-size cocoon production by the use of imidazole compound, Trifumin, the cocoon and cocoon filament qualities, dietary efficiency and fibroin component were examined. cocoon size, cocoon weight and cocoon shell weight of trimolter were smaller than those of tetramolter. Cocoon shell weight of trimolter was 58% and 26% of that of tetramolter in the 3rd instar treated larvae and in the 4th instar treated larvae, respectively. Amount of cocoon shell produced per 1g dry matter ingested was 94% and 85% of that of tetramolter in the 3rd instar treated larvae and in the 4th instar larvae, respectively. The effects of Trifumin on the reeling tests were different according to the stage of the treatment. When Trifumin was treated at the 3rd instar larvae, reelability of cocoon filament, amount of cocoon filament, size of cocoon filament, reelability percentage and raw silk percentage of cocoon were 100%, 60%, 60%, 97% and 90%, respectively. When Trifumin was treated at the 4th imstar larvae, most of reelability tests were inferior to those of the 3rd instar treated larvae, but reelavility percentage was increased 13%. The Trifumin treatment did not affect the electrophoretic patterns of cocoon fibroin.