• The Korean Journal of Malacology
• /
• v.26 no.1
• /
• pp.33-43
• /
• 2010

The ultrastructure of germ cells during spermatogenesis and some characteristics of sperm morphology in male Mytilus coruscus, which was collected on the coastal waters of Gyeokpo in western Korea, were investigated by transmission electron microscope observations. The morphology of the spermatozoon has a primitive type and is similar to those of other bivalves in that it contains a short midpiece with five mitochondria surrounding the centrioles. The morphologies of the sperm nucleus type and the acrosome shape of this species have an oval and modified cone shape, respectively. In particular, the axial rod is observed between the nucleus and acrosome of the sperm. The spermatozoon is approximately $45-50{\mu}m$ in length including a sperm nucleus (about $1.46{\mu}m$ in length), an acrosome (about $3.94{\mu}m$ in length) and tail flagellum (approximately $40-45{\mu}m$). The axoneme of the sperm tail flagellum consists of nine pairs of microtubules at the periphery and a pair at the center. The axoneme of the sperm tail shows a 9+2 structure. Some special charateristics of sperm morphology of this species in the genus Mytilus are (1) acrosomal morphology, (2) the number of mitochondria in the midpiece of the sperm, and (3) the existence of a satellite. The axial rod appears in the acrosome and sperm nucleus as one of the characteristics seen in several species of the subclass Pteriomorphia, unlikely the subclass Heterodonta containing axial filament instead of the axial rod. The number of mitochondria in the midpiece of the sperm of this species in the family Mytilidae are five, as one of common characteristics appeared in most species in the family Mytilidae. Most of Mytilus species contain a satellite body which is attached to the proximal centriole in the middle piece of the sperm, as one of common characteristics of sperm morphology in the family Mytilidae.

• Composites Research
• /
• v.30 no.6
• /
• pp.331-337
• /
• 2017

The composite lattice structures have advantages of high specific stiffness and strength and are mainly applied to the structures of launch vehicles that carry the compressive load. However, since these structures are manufactured by filament winding technology, there are some defects and voids found in the knots. For these reasons, the stiffness and strength of the lattice structures have to be compared with finite element model for predicting design load. But, the full scale test is difficult because time and space are limited and the shape of structure is complex, and hence the simple and reliable test methods for examination of stiffness are needed. In this paper, subelements of composite lattice structures were prepared and compressive and bending test were conducted for examination of stiffness of helical and hoop rib. Test methods for subelements of composite lattice structures that has curved and twisted shape were supposed and compared with finite element analysis results.

• Biomedical Science Letters
• /
• v.23 no.2
• /
• pp.96-103
• /
• 2017

Nocardia species (spp.) are opportunistic pathogen in immunocompromised hosts. The genus Nocardia contains more than 70 species. Nocardia takedensis has been recently reported as a new species of the genus Nocardia. In this study, we describes the first clinical isolate of N. takedensis from the skin lesion in Busan, Korea. For the identification of clinical isolate to the species level as N. takedensis, classical methods (colony morphology, biochemical characteristics, and antimicrobial susceptibility), molecular method (16S rRNA gene sequencing), and MS (mass spectrometry) analysis were conducted. Clinical isolates grew slowly on the culture media (5% sheep blood agar and chocolate agar) under 5% $CO_2$ condition. Especially, carotene pigmentation was detected well on the media. Using mass spectrometry, Nocardia isolate was not identified to the species level. However, molecular method based on 16S rRNA sequencing confirmed the isolate as N. takedensis correctly. N. takedensis isolate was partial positive for acid-fast bacilli on the Ziehl-Neelsen method. And it was observed to be resistance to amoxicillin/clavulanic acid and ciprofloxacin. Our results provide useful information to develop optimal identification protocol of N. takedensis in clinical diagnostic laboratories.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.13 no.1 s.29
• /
• pp.43-47
• /
• 1989

The microstructural changes of nylon 6 UDY, POY and FDY were compared after free-annealing through crystallinity, birefringence, and melting behavior analyses. Free-annealing was done at various temperatures $(120^{\circ}C\;,140^{\circ}C,\;160^{\circ}C,\;180^{\circ}C,\;200^{\circ}C)$ and times (15 min., 30 min., 60 min.) using vaccum oven. Crystallinity was measured by the density gradient column technique and birefringence was measured using a Nikon polarizing microscope with a quartz wedge and Senarmont compensator. Melting behavior was investigated on the basis of DSC melting corves. Crystallinites of specimens increased as the treatment temperature and time increased. Birefringence of UDY increased after annealing and increased as the treatment temperature increased. On the other hand, those of POY and FDY decreased after annealing. Especially, the changes of crystallinity and birefringence of treated POY were particularly lower than those of treated UDY and FDY. Melting peaks of untreated UDY, POY and FDY were different in the position and the shape, but little change was seen in melting peaks in spite of increasing the annealing temperature and time. UDY and FDY showed single melting peaks in all the specimens. But POY showed double melting peaks, which means the coexistences of crystals with different thermal properties.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.26 no.1
• /
• pp.160-167
• /
• 2002

Stretch fabrics are wide-spread for high performance clothing use with requirements of fitness and adaptability to human's movement. A newly developed 100% PET high stretch fabric has excellent properties with respect to stretch, softness, bulkiness, and apparent volume compared to PET filament fabrics. The 100% PET high stretch fabric shows advantages of a dimensional stability, dye and agent adaptability in dying and finishing process, a property of stretch recovery after washing and lower production cost than that of spandex fabric. KES-FB was used to measure mechanical properties to various directions of the fabric. This study centered on whether the 100% PET high stretch fabric is suitable to quality and shape retention of fabric by testing several properties including tensile, compression, shear, bending and surface characteristic to various measuring directions. Tensile linearity showed maximum value at $0^{\circ}$ in plain and $90^{\circ}$ in twill. Shear Stiffness of plain and twill showed maximum value equally at $45^{\circ}\;and\;135^{\circ}$. Bending rigidity showed maximum value at $0^{\circ}$ in plain and $45^{\circ}$ twill. Mean deviation of MIU showed maximum value at $0^{\circ}\;and\;90^{\circ}$ in plain and $135^{\circ}$ in twill.

• Journal of Fashion Business
• /
• v.22 no.4
• /
• pp.93-105
• /
• 2018

Using FDM 3D printing, yarn shape and composition were modeled and 3D printed with PLA and TPU filaments currently used for apparel. Based on this, mechanical characteristics were measured to determine 3D printing yarn according to type of filaments in the 3D printed output and deformation and recovery characteristics due to differences in structure type. As a result of examining tensile and shear characteristics of PLA and TPU 3D printing compiles, TPU overall was measured with significantly lower stress than PLA. This is due to high elasticity of TPU's character, revealing that it has better flexibility than PLA. In addition, during deformation due to external forces, the more freedom between the head and foot parts of the loop, and the lower the force associated with each other, the more flexible it is. TPU revealed that it was easier to tension and recovery from tensile deformation than PLA, indicating potential for clothing materials using 3D printing. If high-molecular materials, such as PLA flexibility, it is likely to provide some flexibility through development of styles, including degree of freedom in modeling. Based on this, we provide basic data for developing 3D printing textures that can be satisfied with textile for apparel.

• Journal of environmental and Sanitary engineering
• /
• v.14 no.4
• /
• pp.143-149
• /
• 1999

In the tungsten industry as light source material, tungsten filament which used as light source material could form after molybdenumwire which used as the center supporter for coil shape tungsten wire was removed. This process uses hydrogen peroxide, Ozone and UV(Ultraviolet)Lamp, for the quantity of hydrogen peroxide decrease. The results were as follows : 1. An incandescent electric Lamp type : FL(FL-20) type : A standard of commodity (P.W.: $19{\pm}1.0mg$, $C.R:4.5{\pm}0.3{\Omega}$) 1) Only hydrogen peroxide treated ; Reaction Time : 65Min., P.W.: 18.60mg, $C.R.:4.60{\Omega}$ 2) Ozone/Ultraviolet/70% of hydrogen peroxide; Reaction Time : 64Min., P.W.: 18.61mg, C.R.: $4.61{\Omega}$ 2. A Fluorescent Lamp Type : GLS(GLS-40) Type : A standard of commodity(P.W.: $11.8{\pm}0.2mg$$65{\pm}1.5{\Omega}$) 1) Only hydrogen peroxide treated ; Reaction Time: 72Min, P.W.:11.88mg, C.R.: $65.62\Omega$ 2) Ozone/Ultraviolet/70% of hydrogen peroxide;Reaction Time:71Min., P.W.:11.88mg, C.R.: $65.63\Omega$

• Fibers and Polymers
• /
• v.1 no.1
• /
• pp.37-44
• /
• 2000

A finite element method is employed fer a flow analysis of the melt spinning process of a non-circular fiber, a PET(polyethylene terephthalate) filament. The flow field is divided into two regions of die channel and spin-line. A two dimensional analysis is used for the flow within the die channel and a three dimensional analysis fur the flow along the spin-line. The Newtonian fluid is assumed for the PET melt and material properties are considered to be constant except for the viscosity. Effects of gravitation, air drag force, and surface tension are neglected. Although the spin-line length is 4.5 m only five millimeters from the spinneret are evaluated as the domain of the analysis. Isothermal and non-isothermal cases are studied fer the flow within the die channel. The relationship between the mass flow rate and the pressure gradient is presented for the two cases. Three dimensional flow along the spin-line is obtained by assuming isothermal conditions. It is shown that changes in velocity and cross-sectional shape occur mostly in the region of 1mm from the die exit.

• Computers and Concrete
• /
• v.25 no.3
• /
• pp.205-214
• /
• 2020

Cytoskeleton components in living cell bear large compressive force and are responsible in maintaining the cell shape. Actually these filaments are surrounded by viscoelastic media within the cell. This surrounding, viscoelastic media affects the buckling behavior of these filaments when external force is applied on these filaments by exerting continuous pressure in opposite directions to the incipient buckling of the filaments. In this article a mechanical model is applied to account the effects of this media on the buckling behavior of intermediate filaments network of cytoskeleton. The model immeasurably associates; filament's bending rigidity, adjacent system elasticity, and cytosol viscosity with buckling wavelength, buckling growth rate and buckling amplitude of the filaments.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.4 no.2
• /
• pp.121-126
• /
• 2002

Breeding programme was initiated during November, 1995 with the main objective to breed productive multivoltine breeds/ hybrids with suitable genetic constitution to suit the fluctuating tropical climate prevailed in India. Two multivoltine breeds viz., BL-24 and BL-27 selected were as breeding resource materials from the silkworm germplasm maintained at Central Sericul-tural Research and Training Institute, Mysore. By adopting hybridization, backcrossing inbreeding and selection, a new multivoltine breed namely BL-67. This breed spins light greenish yellow cocoons and cocoon shape is oval with medium to coarse grains. The evolved breed was crossed with five tropical bivoltine breeds viz., NB4D2, CSR2, CSR5, CSR18 and CSR101 to study the combining ability, and identified a superior hybrid, BL67 ${\times}$ CSR101, named as CAUVERY, The hybrid is characterized by high pupation rate (>95%), high shell weight (> 35 cg), high cocoon shell ratio (> 20%), longer filament length (> 900 m) and high neatness (93) with a renditta of 6.5 producing 2A-3A grade silk. The hybrid is selected for Race Autho-rization test of Central Silk Board.