• Journal of the Korean Society for Heat Treatment
• /
• v.34 no.5
• /
• pp.239-244
• /
• 2021

Following Silicon Carbide, single crystal diamond continues to attract attention as a next-generation semiconductor substrate material. In addition to excellent physical properties, large area and productivity are very important for semiconductor substrate materials. Research on the increase in area and productivity of single crystal diamonds has been carried out using various devices such as HPHT (High Pressure High Temperature) and MPECVD (Microwave Plasma Enhanced Chemical Vapor Deposition). We hit the limits of growth rate and internal defects. However, HFCVD (Hot Filament Chemical Vapor Deposition) can be replaced due to the previous problem. In this study, HFCVD confirmed the distance between the substrate and the filament, the accompanying growth rate, the surface shape, and the Raman shift of the substrate after vapor deposition according to the vapor deposition temperature change. As a result, it was confirmed that the difference in the growth rate of the single crystal substrate due to the change in the vapor deposition temperature was gained up to 5 times, and that as the vapor deposition temperature increased, a large amount of polycrystalline diamond tended to be generated on the surface.

• Elastomers and Composites
• /
• v.55 no.2
• /
• pp.108-113
• /
• 2020

Wear particles of the model tread compounds for bus and truck tires were made using a laboratory abrasion tester and characterized based on their size distributions, shapes, and crosslink densities. The influence of the carbon black contents and rubber compositions (NR= 100 and NR/BR= 80/20) on the production of wear particles was investigated. The wear particles were separated according to size using a sieve shaker. The shape properties of the wear particles were analyzed using an image analyzer and scanning electron microscopy (SEM). Their shapes were observed as tiny stick cookies or sausages with bumpy surfaces. The particle size distribution tended to be smaller with increasing carbon black content. Moreover, the particle size distributions of the NR = 100 samples were larger than that of the NR/BR blend samples. There were different filaments in the wear particles. The filament diameters tended to be thinner with increasing carbon black content. The crosslink density increased with increasing carbon black content, and the crosslink densities of the NR= 100 samples were lower than those of the NR/BR blend ones. The particle size distribution tended to be smaller with increasing crosslink density. Based on the experimental results, the wear particles can be produced by detaching debris from the main body through repetitive strain and recovery.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.20 no.1
• /
• pp.74-79
• /
• 2021

In this paper, the 3D shape of a hydraulic actuator cover was 3D printed by applying two materials, namely PLA and ABS. Subsequently, the printed shape was scanned to analyze the material properties, dimensional change characteristics, dimensions, and scan shape as a real model. To compare and analyze material-specific 3D printing dimensions, a non-contact mobile laser scanner was used to scan a portion of the printed hydraulic actuator cover and the final alignment shape of the 3D printed part was studied on the basis of the design model.

• Journal of environmental and Sanitary engineering
• /
• v.14 no.2
• /
• pp.1-7
• /
• 1999

In the tungsten industry as light source material, tungsten filament which used as light source material ould form after molybdenum wire which used as the center supporter for coil shape tungsten wire was removed. The purpose of this study is to develop new process named "hydrogen peroxide dissolution method". This process uses hydrogen peroxide, which is harmless to human body and oxidize molybdenum wire selectively. The results were as follows:1. The dissolution of molybdenum wire was proportion to a solution and contact surface of molybdenum wire. 2. The optimum $H_2O_2/H_2O$ were 1:0.5 ~ 1:1.75. 3. The time of dissolution was 65~70 minutes, and the PCS of sample were 20,800 PCS(1,820g). 4. Total cost($H_2O_2$, catalyst) was ￦19,088.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2001.03a
• /
• pp.563-570
• /
• 2001

In this study, the charactersistics of horizontal drains used to stabilize the dredged fill are investigated experimentally by doing tensile strength test, discharge capacity test, and filter clogging test. The types of the drains selected for the study are filament type (Tyre-E), embossed type(Type-P) and heat bonded cubic type with the thickness 10mm(Type-010) and 5mm(Type-05). The results of tensile strength and discharge capacity test show that the performance of drain Type-O10 was better than the other drains. This is caused by the fact that the lattice shape core of drain Type-O10 has strong rigidity and minimizes the loss of the sectional area of discharge with increased confining pressure. Analyzing the compatibility of filters by the results of the strength characteristics test and clogging test, the filter of filament type drain produced with polyester clothed polyamide performed well.

• Journal of Fashion Business
• /
• v.11 no.6
• /
• pp.115-124
• /
• 2007

The cross-section of the polyester filament yarn has been modified to have a variety of shape for aesthetic, added functions and sensitivities, and other purposes. Transparent polyester filament of trilobal cross-section has unique optical properties with high anisotropic reflectivity and transmissivity. The monofilament yarns may be utilized to impart to the fabrics lustrous appearance along with unique color change in case differently dyed yarns are woven together. The color changes of the fabric specimens according to the changes in observation and lighting conditions were analyzed using a CCD camera and an image analysis software. The changes of color/luster of the fabric specimens were measured and analyzed based on RGB, $L^*a^*b^*,\;L^*C^*h,$ and the color distribution within a three-dimensional color space.

• Applied Microscopy
• /
• v.39 no.4
• /
• pp.319-324
• /
• 2009

Morphology of the gill in Lateolabrax japonicus was investigated after staining the gill, as a result, we found the gill is composed of gill raker, gill arch, gill filament and gill lamellae. The number of gill raker was 7~10 in the upper and 13~18 in the lower. Ultrastructure of the gill in Lateolabrax japonicus were examined by means of the light and transmission electron microscopes. The gill have primary filament and secondary filament (lamellae). The following cells are identified and described: pavement cell, pillar cell, blood cell, mucose cell and chloride cell etc. Simple epithelial layer consists of squamous epithelium contained large nucleus, intracellular organelles etc. and the surface is covered with some of microridges. The lamella pillar structures are characterized by the axial microtubules and lateral membrane interdigitations. The mucous cells were globular in shape, and had almost the mucous granules of same size with various electron density. Chloride cells contain a lot of mitochondria and specifically developed tubular systems.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.32 no.1
• /
• pp.33-39
• /
• 2022

As 3D printer-related patents expire and major technologies are disclosed, the price of 3D printers is dropping, creating an environment where you can easily find the product you want. In particular, the cheapest FDM (Fused Deposition Modeling) 3D printer is being used in various fields. The FDM method can be manufactured without collapsing of the shape only by attaching a support under certain conditions when outputting the shape. When printing a shape without a support, the irregular surface that occurs at a certain angle is a defect in the product, but it is considered that it can be used as another fun factor in terms of arts and crafts. In this paper, to obtain such an irregular surface, factors that can affect the output were controlled and only the output angle was tested as a displacement factor. As a result of the experiment, it was possible to obtain an irregular surface without the filament flowing down when printing at an angle of 62° to 70° from the vertical. Also, artificially irregular surfaces were applied to craft products.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2004.10a
• /
• pp.224-227
• /
• 2004

A computer program for composite pressure vtlssel design is developed. In-puts are : material-property(young's modulus, shear modulus, tensile strength, poisson's ratio, density), operating pressure, burst pressure, liner thickness, boss diameter, boss weight and number of helical angles. Out-puts are; thickness of each layer, weight of the vessel, dimension of the vessel, inner volume, dome-shape and helical winding angle. Also filament winding angles can be selected various kinds of utilizing virtual boss diameter.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.8
• /
• pp.2741-2749
• /
• 2010

This paper presents the impact damage behavior of filament wound composite vessels and the effect of surface protective materials on their impact resistance. Using an instrumented impact testing machine, a series of impact tests was performed on the base panels and the protected panels (panels with surface protective materials of rubber, kevlar/epoxy or glass/epoxy laminates) that were cut from the full scale vessel. And the impact damage parameters were used to identify the effect of protective materials on the damage resistance of composite vessels. Damage resistance of the composite vessels was considerably affected by the protective materials regardless of the shape of the indenters. Among the protective materials, glass/epoxy laminates was the most effective mean for improving the damage resistance of composite vessels.