• Journal of The Korean Society of Agricultural Engineers
• /
• v.57 no.6
• /
• pp.141-152
• /
• 2015

Most of agricultural structures are consisted of complex components and exposed to various boundary conditions. There have been no ways to express those structures exactly for model experiment. As an alternative, 3D printer can produce any type of solid model. However, there are limited informations related to structural experiments using 3D printer. The object of this study gives the basic informations to structural engineers who try to use 3D printer for model experiment. When PLA was used as a supplier for 3D printer, the outcomes showed less heat deformation to compare with ABS. To test the material properties, two kinds of experiments (three-point flexibility test and compression test) were executed using universal testing machine. In three-point flexibility test, plastic hinge and its deformation were developed as observed in material such as steel. The behavior was in a linear elastic state, and elastic bending modulus and yield force were evaluated. In the compression test using unbraced columns with hinge-hinge boundary condition, the constant yield forces were observed regardless of different lengths in all columns with same section size, whereas the compressive elastic modulus was increased as the length of column was increased. The suggested results can be used for model experiments of various agricultural structures consisted of single material.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.14 no.2
• /
• pp.127-135
• /
• 2007

Precocious metamorphosis was induced in two popular bivoltine breeds i.e. YB and $NB_4D_2$ by an imidazole compound having anti-juvenile hormone activity. The chemical was administered by feeding treatment with mulberry leaf to freshly moulted (0-6 hrs) IV instar larvae. The dose of the chemical was found to be breed specific being 650 ppm for YB and 500 ppm for $NB_4D_2$. The chemical caused complete skipping up of the fifth instar larvae which is most susceptible to diseases. But IV instar was somewhat prolonged. As a result the total larval period was reduced by 4-5 days. However, some of the rearing and reeling parameters like cocoon yield, cocoon weight, shell weight, shell %, filament length and fecundity were reduced for that particular generation only. The effective rate of rearing (ERR %) was significantly increased in trimoulters during the most unfavourable August - September seed crop season. Number of cocoons / kg and number of male moth were significantly higher in trimoulters. These may be useful for preparation of $multi{\times}bi$ hybrid seed. Fine denier was also found in trimoulter cocoon which is the cause of getting fine silk filament from trimoulter cocoons. Normal mating behaviour and emergence pattern was recorded in trimoulters. Bivoltine trimoulter males also showed competence for mating with multivoltine females. These results suggest the possibility of getting trimoulter males during hot and humid seasons when rearing of bivoltine is almost impossible particularly in Eastern and North Eastern India.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.3 no.1
• /
• pp.69-73
• /
• 2001

The effect of topical application 100,300 and 500 $\mu$g/ ml with Mineral Salts of magnesium sulphate and potassium nitrate on economic parameters was ana- lyzed following treatment of last larval stadium. The treated larvae showed significantly decreased larval weight and silk gland weight in all the treated groups along with other decreased Iarval, cocoon and adult parameters. The female cocoon weight was significantly decreased in all the treated groups with decreased female cocoon shell weight and male cocoon weight at 300 and 500$\mu$g/ml respectively. The length and weight of filament was significantly decreased at 300 and 500 $\mu$g/ml respectively and denier at 500 $\mu$g/ ml. The fecundity decreased significantly in 300 and 500 $\mu$g/ml treated groups when compared with the corresponding parameters of the carrier control.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.3 no.1
• /
• pp.31-35
• /
• 2001

Ten newly evolved bivoltine hybrids of silkworm (Bombyx mori L) were evaluated with control hybrid KA${\pm}$NB4D2 during three seasons of a year for their seasonal performance. Analysis of variance and other statistical methods were employed and the performance was observed in respect of 10 quantitative traits. The results showed significant genotype${\pm}$environment interaction with respect to four quantitative characters viz. fecundity, yield/10,000 larvae, filament length and raw silk (%). Environmental effects were significant for nine characters out of ten characters evaluated. A 105${\pm}$J2 and B${\pm}$NB4D2 were considered as highly adaptable hybrids to local conditions with high mean for maximum characters studied and found suitable to rear in all seasons.

• Journal of the Optical Society of Korea
• /
• v.7 no.3
• /
• pp.156-159
• /
• 2003

Permanent structure of photoinduced singlemode waveguide in optical fluoride glasses was demonstrated using the self-channeled plasma filament excited by a femtosecond (110 fs) Ti:sapphire laser ($λ_p$ = 800 nm). The photoinduced refractive index modification in ZBLAN glasses reached a length of approximately 10 - 15 mm from the input surface of the optical glass with the diameters ranging from 5 to 8 ${\mu}{\textrm}{m}$ at input intensities more than l.0 ${\times}$ $10^{12}$ W/$\textrm{cm}^2$. The graded refractive index profiles were fabricated to be a symmetric form from the center of an optical fluoride glass and a maximum value of refractive index change (ㅿn) was measured to be l.3${\times}$$10^{-2}$. The beam profile of the output beam transmitted through the modified region showed that the photoinduced refractive index modification produced a permanent structure of singlemode waveguide.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.6 no.1
• /
• pp.75-79
• /
• 2003

Oral supplementation of zinc chloride to silkworm larvae in different concentrations (30, 60 and 90 ${\mu}g$/ml) to the fourth and fifth instar resulted in a significant increase in commercial traits, like larval weight, silk gland weight, cocooning percentage in lower concentrartion (30 ${\mu}g$) treated group. The female cocoon weight, shell weight and its ratio were significantly increased in 30 and 60 ${\mu}g$ treated groups, male cocoon weight, and shell weight in 30 ${\mu}g$ treated group and its ratio in 60 and 90 ${\mu}g$ treated groups, filament length, weight and moth emergence percentage in all the treated groups and egg productivity in 90 ${\mu}g$ treated group were increased significantly. The remaining groups did not show any significant changes compared with that of carrier control.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.2 no.1
• /
• pp.69-74
• /
• 2001

The effect of topical application with androstenedione on economic parameters was analyzed following treatment of last larval stadium. The treated larvae showed significantly increased larval weight along with other enhanced larval, cocoon and adult parameters. The larval period was significantly shortened in all the treated groups with increased cocooning percentages cocoon weight and its shell weight in female and filament length, weight and denier in all the treated groups. Hatching percentage increased significantly in dose dependent manner in all the treated groups when compared with the corresponding parameters of the carrier control group. This suggests that androstenedione can be used effectively for commercial silkworm rearing.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.2 no.1
• /
• pp.79-81
• /
• 2001

A study was conducted to establish the degree of genetic divergence between different hybrid forms and rearing conditions through estimation of the minimum number of genes (allelic pairs) differentiating parents in terms of specific quantitative traits. It was established that the minimum gene numbers differentiating parental lines in the inheritance of cocoon was 1, of cocoon shell weight- between 1 and 2, and of silk filament length- between 2 and 3. The variability in the specific genetic parameter could be explained by the reliability of the statistical-and-genetic method used and the expression of genes affecting the formation of each of the characters tested. Gene expression, in its turns is conditioned both by the gene interaction within the genotypes and the different genotype response to environmental change. To go deep in the problem, experiments should be conducted under strictly controlled conditions, reducing the mathematical-and-genetic analysis to a physiological levels and hence to analyse the genetic nature of the specific quantitative character formation and its genetic control.

• Journal of fish pathology
• /
• v.19 no.2
• /
• pp.109-117
• /
• 2006

A new myxosporean species Ceratomyxa oplegnathus n. sp. was found from the gallbladder of cultured rock bream, Oplegnathus fasciatus. Mature spores were 44.14 ± 2.41 (39.04-48.41) ㎛ in length, 8.52 ± 0.36 (7.9-9.26) ㎛ in width in sutural view. Spores contained two spherical polar capsules measuring 3.04 ± 0.2 (2.71-3.37) ㎛ in diameter and a binucleated sporoplasm. Each polar capsule had a 5-6 coiled polar filament, and was situated near the sutural line. In ultrastructural observation, asynchronous divisions of generative cells without pansporoblast formation gave arise to 2 spores within a trophozoite. Sporoplasmic cell in the sporoblast was binucleated, and capsulogenic cells had large amounts of rough endoplasmic reticulum, external tubules, and capsular primordia.

• Korean Journal of Environmental Biology
• /
• v.38 no.1
• /
• pp.101-105
• /
• 2020

Ralfsia longicellularis is known as an endemic species in Far East Asia. In this study, we report R. longicellularis as a new record from Korea based on morphological and molecular analyses. Molecular analyses based on plastid-encoded rbcL gene sequences and morpho-anatomical studies were undertaken on Ralfsia species, a poorly studied genus from Korea. Ralfsia longicellularis is mainly characterized by a dark brown thallus; 770-1200 ㎛ thick, curved cells in the creeping and ascending parts of the filaments; basal layer and erect filament cells with a width-to-length ratio of 1 : 1.5 to 10; narrowshaped sporangia on-stalk cells at the base of the paraphyses; and mostly uniseriate plurilocular reproductive organs capped with 1-2 sterile cells. The R. longicellularis samples from Korea in this study were similar to ones collected from the type locality (Peter the Great Bay, Russia) in morphology. The rbcL analyses also revealed that our Korean R. longicellularis samples were placed in the same clade with Russian materials, within a Ralfsia clade but distinct from the congeners.