• 패션비즈니스
• /
• 제22권4호
• /
• pp.93-105
• /
• 2018

Using FDM 3D printing, yarn shape and composition were modeled and 3D printed with PLA and TPU filaments currently used for apparel. Based on this, mechanical characteristics were measured to determine 3D printing yarn according to type of filaments in the 3D printed output and deformation and recovery characteristics due to differences in structure type. As a result of examining tensile and shear characteristics of PLA and TPU 3D printing compiles, TPU overall was measured with significantly lower stress than PLA. This is due to high elasticity of TPU's character, revealing that it has better flexibility than PLA. In addition, during deformation due to external forces, the more freedom between the head and foot parts of the loop, and the lower the force associated with each other, the more flexible it is. TPU revealed that it was easier to tension and recovery from tensile deformation than PLA, indicating potential for clothing materials using 3D printing. If high-molecular materials, such as PLA flexibility, it is likely to provide some flexibility through development of styles, including degree of freedom in modeling. Based on this, we provide basic data for developing 3D printing textures that can be satisfied with textile for apparel.

• 한국산업융합학회 논문집
• /
• 제12권2호
• /
• pp.69-78
• /
• 2009

Dust in the fabric production sites is increased by the static electricity in air which is generated in the manufacturing process. The static electricity is shown in inverse proportion to humidity of the production sites. The optimum humidity rate for the filament in the production process has been established as 65~75%. Where as, average humidity rate of production site is estimated as 40%. Therefore, it is necessary to raise the humidity rate by 30% to maintain appropriate humidity to control generation of static electricity and dust in the production sites. In this study, a new air-jet water sprayer was developed and it can produce $10{\mu}m$ sprayed particles. When the air-jet water sprayer was operated on the production site dust generation rate was shown far below the environmental standard. It is assumed that when the air jet sprayers was applied to 1,000 fabric machines of 5 gloves making plants, its productivity and rates of operation will be improved by value of about 2.5 billion Won a year.

• 한국산업융합학회 논문집
• /
• 제3권4호
• /
• pp.345-351
• /
• 2000

The change of crystalline structure of drawn PP filaments were investigated. Samples were treated by isothermally annealed after elevated heating from $20^{\circ}C$. Measurements were carried out with XRD for crystallite size and density gradient tube for crystallinity. Isothermally heat treatment were carried out at the temperature of $100^{\circ}C$, $120^{\circ}C$ and $140^{\circ}C$ for 10min., 30min. and 60min. in dry oven. The isothermal heat treatment after elevated heating from $20^{\circ}C$ were carried out at the temperature of $100^{\circ}C$, $120^{\circ}C$ and $140^{\circ}C$ for 10min., 30min. and 60min. with heating rate of $1^{\circ}C$/min., $5^{\circ}C$/min. and $10^{\circ}C$/min. From the results of this study, it found the following facts. It was found that the crystallinity and crystallite size of (110) plane of sample were increased with increasing of annealed temperature and time. Also crystallinity and crystallite size of samples which were isothermally annealed after elevated heating from $20^{\circ}C$ were higher than those of isohtermally annealed samples.

• 한국산업융합학회 논문집
• /
• 제26권5호
• /
• pp.937-943
• /
• 2023

In this study, the mast cover of submarine was reverse engineered and structural analysis was performed. In order to print with the 3D printer, the modeling was reduced to 1/5 size by applying geometric similarity. From the structural analysis results, it was found that the maximum value of equivalent stress generated in the mast cover was 180.9 MPa. This stress value occurs on the inner surface in the major axis. As a result of applying the load condition at a diving depth of 600 m, the mast cover is in a completely elastic state. The 1/5 size model printed on FDM 3D printer with PLA filament was the same as the reverse engineered modeling and it was printed in a perfect shape with no apparent defects. The 1/5 size model printed on PBF 3D printer with SUS316L powder was perfectly manufactured with no apparent defects.

• 한국의류산업학회지
• /
• 제11권4호
• /
• pp.661-666
• /
• 2009

The purpose of this study is to analyze the dyeability of polyester(PET) fabric by thermal bonding with low melting component of bicomponent fiber and to describe the change of physical properties of thermal bonded PET fabrics. The PET fabrics were prepared with regular PET fiber as warp and bicomponent fiber as weft. The bicomponent fiber of sheath-core type was composed with a regular PET core and low melting PET sheath. The thermal bonding of PET fabric was carried out in pin tenter($195^{\circ}C$) for 60 seconds. In this study, we investigated the dye ability and fastness of the dyed PET fabric. Dye ability of E-type dyestuff is higher than S-type dyestuff. In the case of E- type dyestuff, the saturated dyeing time was 10minutes at $130^{\circ}C$. The washing fastness and light fastness were excellent as 4-5grade.

• 한국의류산업학회지
• /
• 제2권5호
• /
• pp.443-449
• /
• 2000

An investigation of the relative velocity of friction surface for the newly developed cone drum twister texturing mechanism is reported. The cone drum twister is one of the outer surface contacting friction-twisting devices in false-twist texturing. In this cone drum twister, a filament yam passes over the surface of the cone drum that rotates by passing the yarn without a special driving device. This research is theoretically composed of the analysis of the false twisting mechanism. The equations were derived by using the conical angle of the cone drum, projected wrapping angle, and yarn helix angle. Theoretical values of the relative velocity of friction surface were calculated and discussed. It is shown that, as the projected wrapping angle increased, the relative velocity of friction surface decreased. But as the conical angle increased the relative velocity of friction surface also increased.

• 한국의류산업학회지
• /
• 제24권5호
• /
• pp.505-518
• /
• 2022

3D printing technology, also known as additive manufacturing(AM), has not been actively used in the clothing industry despite its potential for economic, environmental, and labor efficiency. Therefore, this study aims to propose a new 3D printing method for the clothing industry, which will be more readily accessible. This roll-type printing method can print wide-sized patterns at once using a 3D modeling program and a FDM 3D printer and help overcome the limitations imposed by the size of the printer. Then, to demonstrate the practical application cases of this printing method, bags of three designs were developed. Prior to product development, a thickness test was performed for stable printing using TPU(Thermoplastic Poly Urethane) filament, and a thickness of 0.45 mm was found to be most suitable for it. Next, the time efficiency test showed that the roll-type printing method takes less time compared to the general printing method in printing wide-sized patterns. Based on these tests, three bags, , and , were developed to confirm the suitability of the roll-type printing method for product development. The advantages of 3D roll-type printing can lie in overcoming of the spatial limitation, and the environmental sustainability as it can reduce waste from the production process. This study is significant in that it presents a new 3D printing method to improve the space limitations and time inefficiency of 3D printers.

• 한국산학기술학회논문지
• /
• 제21권5호
• /
• pp.54-59
• /
• 2020

콘크리트의 품질에 큰 영향을 미치는 중요 자재인 굵은 골재는 채취장소, 생산방법 등에 따라 다양하게 생산된다. 현재 건설업계는 굵은 골재의 안정적인 공급과 표준적인 품질 확보 방안이 필요한 실정이다. 본 연구는 굵은 골재를 3D 프린팅으로 제작하여 사용하는 것이 이 문제 해결에 도움이 되는지를 검토하는 것이 목적이다. 3D 프린팅을 위한 필라멘트는 검토 결과 ABS 필라멘트가 선정되었다. 굵은 골재의 설계는 CATIA를 사용했으며, 제작은 CUBICON Single Plus를 사용하였다. 공시체는 3개의 AE제를 사용 것과 3개의 그렇지 않은 것 등 총 6개를 제작한 후 28일 동안 수중 양생하였다. 압축강도 시험 결과 AE제를 사용할 경우 콘크리트표준시방서에서 규정한 경량콘크리트 설계기준의 최저 압축강도 이상이 발현됨을 확인했다. 이는 3D 프린터로 제작한 굵은 골재가 경량콘크리트의 굵은 골재로 사용될 가능성이 있음을 시사한다. 특히 대량생산 체계를 갖출 경우 궁극적으로 굵은 골재의 안정적 수급과 표준적인 품질 확보라는 건설업계가 당면하고 있는 문제 해결에도 일조할 수 있을 것이다. 향후에는 3D 프린팅으로 제작한 굵은 골재의 부착력 향상 방안, 경제성 분석 등에 관한 연구를 진행할 예정이다.

• 한국자원식물학회지
• /
• 제28권2호
• /
• pp.235-242
• /
• 2015

국내 도입된 하이부쉬 블루베리의 품종 선발의 기초 자료로 활용하기 위하여 블루베리의 형태적 및 품종별 화기 특성에 관해 연구하였다. 블루베리의 수술의 형태를 보면 화사는 판형이었고 모용이 잘 발달되어 있으며, 개약 시 약벽이 열개되지 않고 돌출된 두 개의 관으로 꽃가루가 배출되어 독특하였다. 화분은 3월 하순경에 감수 분열된 후에 분리되지 않은 채로 성숙한 사분자 화분(tetrad pollen)이었다. 약당 사분자 화분립 수는 400~1,300개였으며, 화분립 수가 많은 품종이 발아율도 높은 편이었다. 블루베리의 암술은 5개의 심피로 구성되어 있으며, 화주는 갈라진 부분이 없이 하나였다. 자방당 배주 수는 39~67개 정도였으며, 각 품종별로 변이 계수가 11.6~31.0%로 큰 편이었다. ‘Bluejay’와 ‘Sharpblue’간의 자가 및 타가교배 결과 자가교배보다 타가교배에서 종자 형성률이 높았다.

• International Journal of Industrial Entomology and Biomaterials
• /
• 제13권1호
• /
• pp.45-50
• /
• 2006

Papers were prepared from cut cocoons and mulberry branches, which are byproducts from sericulture industry. The long filament of silk should be cut into appropriate length in order to prepare paper and this was achieved by chemical method. By a mixture of sodium hydroxide and sodium carbonate solution, the silk filaments were cut into short fibers (less than 1 mm in length). Since the short silk fibers (sSf) could not bind each other by itself, starch and poly(ethylene oxide)(PEO) were added as a bonding agent. When starch and PEO were used in a ratio of 3:7, the silk papers had optimum mechanical properties for paper. Fibers from the skin of mulberry branches (MBF) were added to sSf to enhance the mechanical properties of pure silk paper. Bleaching of MBF was performed with a mixture of hydrogen peroxide and sodium silicate. The mechanical properties were greatly enhanced and the optimum blend ratio of MBF and sSf were 7:3. The mulberry/silk paper has good absorption property against formaldehyde, and therefore, the paper could be applied as a wall paper for preventing the sick house syndrome.