• Journal of Welding and Joining
• /
• 제25권3호
• /
• pp.18-27
• /
• 2007

Laser welding process is widely used in the industrial field due to its numerous advantages: a small heat affected zone(HAZ), deep penetration, high welding speed, ease of automation, single-pass thick section capability, enhanced design flexibility, and small distortion after welding. The objective of this research works is to investigate the influence of the process parameters, such as the welding fur metals with CW Nd:YAG lasers. The bead-on-plate and Lap welding experiments are carried out for several combinations of the experimental conditions. In order to quantitatively examine the characteristics of the welding quality of the cross section, tensile stress behavior and the hardness of the welded part are investigated in comparison of the Nickel coated and Nickel uncoated S45C steel. As a result of experiment, nickel coated S45C Steel showed more even weld zone than Nickel uncoated counterpart upon lap welding. Also, it showed relatively small amount of internal defects and spatter, and Nickel coated S45C showed better weldability than Nickel uncoated S45C steel. The optimum welding process upon lap welding of Nickel coated S45C steel is when each laser power is 1900W; focal positions is -1mm; welding speed is $0.9{\sim}1.0m/min$. The heat input was $4.178{\sim}4.36{\times}103J/cm^2$.

• Weed & Turfgrass Science
• /
• 제6권3호
• /
• pp.249-261
• /
• 2017

들잔디 재배지역에 갈색퍼짐병을 방제하기 위하여 Tebuconazole 약제 및 Streptomyces sp.와 Burkholderia sp. 미생물을 처리하였다. 무처리구에 비해 Tebuconazole 약제 처리구, Streptomyces sp., Burkholderia sp.와 Streptomyces S8 미생물 처리구는 잔디의 생육, 엽록소와 카로티노이드, 프롤린 함량은 유의하게 증가하였며, MDA 함량은 감소하였다. 토양미생물인 Streptomyces sp., Burkholderia sp.와 Streptomyces sp. S8 처리에 따라 갈색퍼짐병 병원균밀도 감소로 갈색퍼짐병의 증상이 완화되어 정상적인 잔디로 생육이 된 것으로 판단되었다. 이러한 결과는 사용된 미생물이 잔디의 생물적 방제와 잔디의 생육 촉진 미생물로 이용될 수 있음을 시사한다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2011년도 제41회 하계 정기 학술대회 초록집
• /
• pp.183-183
• /
• 2011

Multiferroic materials have been widely studied in recent years, because of their abundant physics and potential applications in the sensors, data storage, and spintronics. $BiFeO_3$ is one of the well-known single-phase multiferroic materials with $ABO_3$ structure and G-type antiferromagnetic behavior below the Neel temperature $T_N$ ~ 643 K, but the ferroelectric behavior below the Curie temperature $T_c$~1,103 K. In this study, the $BiFe_{1-x}Ni_xO_3$ (x=0 and 0.05) bulk ceramics were prepared by solid-state reaction and rapid sintering with high-purity $Bi_2O_32$, $Fe_3O_4$ and NiO powders. The powders of stoichiometric proportions were mixed, as in the previous investigations, and calcined at 450$^{\circ}C$ for $BiFe_{1-x}Ni_xO_3$ for 24 h. The obtained powders were grinded, and pressed into 5-mm-thick disks of 1/2-inch diameter. The disks were directly put into the oven, which has been heated up to 800$^{\circ}C$ and sintered in air for 20 min. The sintered disks were taken out from the oven and cooled to room temperature within several min. The phase of samples was checked at room temperature by powder x-ray diffraction using a Rigaku Miniflex diffractometer with Cu K${\alpha}$ radiation. The Raman measurements were carried out by employing a hand-made Raman spectrometer with 514.5-nm-excitation $Ar^+$ laser source under air ambient condition on a focused area of 1-${\mu}m$ diameter. The field-dependent magnetization measurements were performed with a superconducting quantum-interference-device magnetometer.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2011년도 제40회 동계학술대회 초록집
• /
• pp.77-77
• /
• 2011

These days, a growing demand for memory device is filled up with the flash memory and the dynamic random access memory (DRAM). Although DRAM is a reasonable solution for current demand, the universal novel memory with high density, high speed and nonvolatility, needs to be developed. Among various new memories, the magnetic random access memory (MRAM) device is considered as one of good candidate memories because of excellent features including high density, high speed, low operating power and nonvolatility. The etching of MTJ stack which is composed of magnetic materials and insulator such as MgO is one of the vital process for MRAM. Recently, MgO has attracted great interest in the MTJ stack as tunneling barrier layer for its high tunneling magnetoresistance values. For the successful realization of high density MRAM, the etching process of MgO thin films should be investigated. Until now, there were some works devoted to the investigations on etch characteristics of MgO thin films. Initially, ion milling was applied to the etching of MgO thin films. However, ion milling has many disadvantages such as sidewall redeposition and etching damage. High density plasma etching containing the magnetically enhanced reactive ion etching and high density reactive ion etching have been employed for the improvement of etching process. In this work, inductively coupled plasma reactive ion etching (ICPRIE) system was adopted for the improvement of etching process using MgO thin films and etching gas mixes of $CH_4$/Ar and $CH_4$/$O_2$/Ar have been employed. The etch rates are measured by a surface profilometer and etch profiles are observed using field emission scanning emission microscopy (FESEM). The effects of gas concentration and etch parameters such as coil rf power, dc-bias voltage to substrate, and gas pressure on etch characteristics will be systematically explored.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2011년도 제41회 하계 정기 학술대회 초록집
• /
• pp.124-124
• /
• 2011

This study investigated the interaction of varied plasma power with ultralow-k toluene-tetraethoxysilane (TEOS) hybrid plasma polymer thin films, as well as changing electrical and mechanical properties. The hybrid thin films were deposited on silicon(100) substrates by plasma enhanced chemical vapor deposition (PECVD) system. Toluene and tetraethoxysilane were utilized as organic and inorganic precursors. In order to compare the electrical and the mechanical properties, we grew the hybrid thin films under various conditions such as rf power of plasma, bubbling ratio of TEOS to toluene, and post annealing temperature. The hybrid plasma polymer thin films were characterized by Fourier transform infrared (FT-IR) spectroscopy, atomic force microscopy (AFM), nanoindenter, I-V curves, and capacitance. Also, the hybrid thin films were analyzed by using ellipsometry. The refractive indices varied with the RF power, the bubbling ratio of TEOS to toluene, and the annealing temperature. To analyze their trends of electrical and mechanical properties, the thin films were grown under conditions of various rf powers. The IR spectra showed them to have completely different chemical functionalities from the liquid toluene and TEOS precursors. Also, The SiO peak intensity increased with increasing TEOS bubbling ratio, and the -OH and the CO peak intensities decreased with increasing annealing temperature. The AFM images showed changing of surface roughness that depended on different deposition rf powers. An nanoindenter was used to measure the hardness and Young' modulus and showed that both these values increased as the deposition RF power increased; these values also changed with the bubbling ratio of TEOS to toluene and with the annealing temperature. From the field emission scanning electron microscopy (FE-SEM) results, the thickness of the thin films was determined before and after the annealing, with the thickness shrinkage (%) being measured by using SEM cross-sectional images.

• Journal of Applied Biological Chemistry
• /
• 제43권2호
• /
• pp.104-108
• /
• 2000

The plant growth-promoting activity of Acremonium strictum MJN1 isolated from roots of Panox ginseng was explored. The myceliaI extract of A. strictum MJN1 enhanced the rice seedling growth by 14.5 and 9.0% in the dried weight of shoots and roots, and the growth of red pepper by 54 and 85% in the top length and the dried weight in pot experiments, respectively. The plant growth-promoting substances in the myceliaI extract of Acremonium strictum MJN1 were identified as D-adenosine and glycerol. Both commercial D-adenosine and glycerol also promoted significantly the rice seedling growth but, unlike the mycelial extract of A. strictum MJN1, hardly affected the yields of plants grown in pots or field. Therefore, it is possible that other plant growth-promoting substances are produced by A. strictum MJN1. However, this study shows that A. strictum MJN1 has a great potential as a biofertilizer.

• 한국분말재료학회지
• /
• 제22권6호
• /
• pp.385-390
• /
• 2015

We report a synthesis of non-toxic InP nanocrystals using non-pyrolytic precursors instead of pyrolytic and unstable tris(trimethylsilyl)phosphine, a popular precursor for synthesis of InP nanocrystals. In this study, InP nanocrystals are successfully synthesized using hexaethyl phosphorous triamide (HPT) and the synthesized InP nanocrystals showed a broad and weak photoluminescence (PL) spectrum. As synthesized InP nanocrystals are subjected to further surface modification process to enhance their stability and photoluminescence. Surface modification of InP nanocrystals is done at $230^{\circ}C$ using 1-dodecanethiol, zinc acetate and fatty acid as sources of ZnS shell. After surface modification, the synthesized InP/ZnS nanocrystals show intense PL spectra centered at the emission wavelength 612 nm through 633 nm. The synthesized InP/ZnS core/shell structure is confirmed with X-ray diffraction (XRD) and Inductively Coupled Plasma - Atomic Emission Spectrometer (ICP-AES). After surface modification, InP/ZnS nanocrystals having narrow particle size distribution are observed by Field Emission Transmission Electron Microscope (FE-TEM). In contrast to uncapped InP nanocrystals, InP/ZnS nanocrystals treated with a newly developed surface modified procedure show highly enhanced PL spectra with quantum yield of 47%.

• 한국분말재료학회지
• /
• 제23권2호
• /
• pp.95-101
• /
• 2016

Carbon nanofiber (CNF) composites coated with spindle-shaped $Fe_2O_3$ nanoparticles (NPs) are fabricated by a combination of an electrospinning method and a hydrothermal method, and their morphological, structural, and chemical properties are measured by field-emission scanning electron microscopy, transmission electron microscopy, X-ray diffraction, and X-ray photoelectron spectroscopy. For comparison, CNFs and spindle-shaped $Fe_2O_3$ NPs are prepared by either an electrospinning method or a hydrothermal method, respectively. Dye-sensitized solar cells (DSSCs) fabricated with the composites exhibit enhanced open circuit voltage (0.70 V), short-circuit current density ($12.82mA/cm^2$), fill factor (61.30%), and power conversion efficiency (5.52%) compared to those of the CNFs (0.66 V, $11.61mA/cm^2$, 51.96%, and 3.97%) and spindle-shaped $Fe_2O_3$ NPs (0.67 V, $11.45mA/cm^2$, 50.17%, and 3.86%). This performance improvement can be attributed to a synergistic effect of a superb catalytic reaction of spindle-shaped $Fe_2O_3$ NPs and efficient charge transfer relative to the one-dimensional nanostructure of the CNFs. Therefore, spindle-shaped $Fe_2O_3$-NP-coated CNF composites may be proposed as a potential alternative material for low-cost counter electrodes in DSSCs.

• 한국작물학회지
• /
• 제46권1호
• /
• pp.1-5
• /
• 2001

Field experiment was conducted during 1993-94 season to determine the pattern of nutrient uptake and productivity of maize/sweet potato intercropping system. Four levels of nitrogen (0, 50, 100 and 150kg N ${ha}_{-1}$) and four levels of potassium (0, 40, 80 and 120kg $K_2$O ${ha}_{-1}$) formed treatment variables. Plants were sampled periodically to determine dry matter and tissue concentrations of N and K in the individual plant components of intercropped maize and sweet potato. Nitrogen and potassium fertilizer did not interact significantly to nutrient uptake by any plant parts of intercropped maize and sweet potato. But application of N fertilizer independently enhanced N uptake in all the plant parts of maize and sweet potato. The uptake of N in leaf, leaf sheath, stem, husk, and cob of maize increased upto 90 days after planting (DAP) but grain continued to accumulate N till its maturity. Sweet potato exhibited a wide variation in N uptake pattern. Sweet potato leaf shared the maximum uptake of N at 50 DAP which rapidly increased at 70 DAP and then declined. Declination of N uptake by petiole and stem were observed after 120 DAP whereas N uptake by tuber increased slowly upto 90 DAP and then rapidly till harvest. Rate of applied K had very little effect on the uptake patterns in different components of intercropped maize. Pattern of K uptake by leaf, petiole and stem of sweet potato showed almost similar trend to N uptake. But uptake of K by tuber increased almost linearly with the K application. Pattern of N and K uptake by grain and tuber paralleled the grain yield of maize and sweet potato respectively. Intercropped productivity of maize and sweet potato found to be better by the application of 100kg N and 120 kg $K_2$O ${ha}_{-1}$

• Journal of Crop Science and Biotechnology
• /
• 제10권4호
• /
• pp.281-286
• /
• 2007

Gibberellins are growth hormones that play a pivotal role in the growth and development of plants. Present investigations were carried to check the effect of nitrogen(N) and silicon(Si) on bioactive $GA_1$ and its immediate precursor $GA_{20}$ at different growth stages of two rice cultivars with different maturity traits. It was observed that the endogenous bioactive $GA_1$ level gradually increased during vegetative stage and anthesis stage of both Junghwabyeo(early flowering cultivar) and Daesanbyeo(late flowering cultivar). However, the $GA_1$ and $GA_{20}$ content start decreasing during the seed filling stage in both rice cultivars, which indicated a possible relationship of bioactive $GA_1$ and floral development. Our results also confirmed that early 13-hydroxylation pathway was operated at all developmental stages of rice plant. Variation in the levels of the endogenous gibberellins in rice shoots were measured by GCMS-SIM using $^2H_2$-labeled gibberellins as internal standards. Combined application of N and Si enhanced growth parameters and reduced lodging index of both rice cultivars. It was thus concluded that the level of physiologically active $GA_1$ increased during vegetative and early reproductive stage, but starts declining at seed filling stage.