• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 1996년도 가을 학술발표회 논문집
• /
• pp.285-294
• /
• 1996

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 1998년도 지반조사위원회 여름 학술세미나
• /
• pp.98-118
• /
• 1998

• 한국산학기술학회논문지
• /
• 제13권11호
• /
• pp.5572-5577
• /
• 2012

사면파괴가 발생한 사면의 하부 연약지반에 대한 현장원치시험결과와 실내시험결과 그리고 강도 추정식에 의한 결과를 상호 비교분석해 보았다. 사면 하부연약지반에 대한 콘관입시험결과와 현장베인시험결과의 비교를 통해 결정된 연약지반의 콘계수값은 12였다. 콘관입시험자료로부터 콘계수 추정식을 적용하여 구한 연약지반의 비배수강도는 현장베인시험에 의한 그것보다 보수적인 값을 주었다. 압밀시험결과를 이용한 추정식을 통해 연약지반의 비배수강도를 추정하고 현장베인시험에 의한 비배수강도와 비교해 보았다. 세 가지 방법을 통한 추정결과에 따르면 Jamiolkowsky 방법에 의한 결과가 시험을 통해 구한 결과에 가장 근접하였으며 현장베인시험에 의한 비배수강도에 비해 0.88~1.23 범위의 값을 보였다.

• International Journal of Fluid Machinery and Systems
• /
• 제1권1호
• /
• pp.47-56
• /
• 2008

The flow behind the variable area nozzle which corresponds to the flow at the leading edge of the impeller was measured with a 3-hole yaw probe and calculated with CFD. Two nozzle throat-areas were investigated. One is the smallest and the other is the largest opening for the variable nozzle. Test results agreed with the calculated results qualitatively. The leakage flow through the tip clearance of the nozzle vane significantly affected the flow field downstream of the nozzle vane with the smallest opening. However, the effect on leakage flow on the flow field downstream of the nozzle vane with the largest opening was very weak and the effect of wake is dominant.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2002년도 가을 학술발표회 논문집
• /
• pp.237-244
• /
• 2002

A comparative study of 134 mechanical (Dutch cone) and 9. electronic cone (Piezocone) penetration data from the southern part of Korea has been performed. In general, Dutch cone results may be different from piezocone results due to the difference in structure of the cones. Cone penetrometer test data were analyzed and plotted in soil classification chart proposed by Robertson et. al.(1986,1990) Cone factors of Dutch cone and piezocone test have empirically been determined using laboratory and field vane test results. Using this cone factors, it was shown that there was good correlation between shear strength estimated using cone resistance and that of laboratory test and field vane tests. It was found that there was a good correlation between cone resistance from Dutch cone and that from piezocone. Dutch cone test provides a useful means for stratigraphic profiling in large project and has some advantage over piezocone in particular situations, such as very soft clay ground and dredged area.

• 한국지반환경공학회 논문집
• /
• 제20권2호
• /
• pp.59-67
• /
• 2019

전남 남해안 지역인 광양항 동측배후단지 연약지반에서 수행한 실내시험, 현장베인시험 및 피에조콘 관입시험 결과를 이용하여 연약지반의 공학적 특성을 규명하고, 피에조콘계수 산정을 위해 최적의 피에조콘 관입시험 심도를 결정하였다. 본 논문에서 이용한 자료는 61개의 실내시험과 226회의 현장베인시험, 피에조콘 관입시험 26개소이다. 실내시험 분석 결과 남해안의 다른 지역에 비해 비중, 함수비, 액성한계 및 소성지수 등의 물리적 특성이 높게 나타나며, 일축압축강도와 비배수전단강도의 역학적 특성은 넓은 범위로 분포하고 비교적 작은 값을 나타냈다. 소성도에 의한 흙 분류 결과 소성이 큰 무기점토(CH)와 소성이 작은 무기점토(CL)로 분류되었으며, Robertson(1990) 분류도표에 의한 흙 분류 결과 대부분 Type 3인 점성토에 해당하였다. 현장베인시험으로 구한 비배수전단강도를 기준으로 경험적 방법에 의해 피에조콘계수를 산정했다. 이를 위해 현장베인시험 측정심도와 비교되는 피에조콘 관입시험의 적정 측정심도 범위를 설정하기 위해 3가지 심도범위로 상관성을 분석한 결과 베인 길이의 5배 범위 측정값의 평균을 사용하는 것이 높은 상관성을 보여준다.

• 한국농공학회지
• /
• 제45권2호
• /
• pp.96-106
• /
• 2003

134 Dutch cone (mechanical cone) and 9 piezocone (electronic cone) penetration tests have been performed in the southwestern part of Korea. In general, Dutch cone results may be different from that of piezocone due to the difference in structure of the cones. 6 Dutch cone and piezocone test data which were obtained at the same point respectively, were analyzed and plotted in soil classification chart proposed by Robertson et. al.(1986, 1990). Cone factors of Dutch cone and piezocone test empirically have been determined using laboratory and field vane test results. Using this cone factors, it was shown that there was good correlation between shear strength estimated using cone resistance and that of laboratory test and field vane tests. It was found that there was a good correlation between cone resistance from Dutch cone and that from piezocone. Relationship formula was also suggested. Dutch cone test provides a useful means for stratigraphic profiling in large project and has some advantage over piezocone in particular situations, such as very soft clay ground and dredged area.

• 한국자동차공학회논문집
• /
• 제16권4호
• /
• pp.88-96
• /
• 2008

Effects of the duct inlet guide vane on the flowrate distribution characteristics of the defroster nozzle exit in a defrost duct system were investigated experimentally to design the optimum heating, ventilation and air conditioning (HVAC) system applied in an automotive compartment. A 3-dimensional hot-wire anemometer system was used to measure the velocity field in the vicinity of the defroster nozzle jet flow and the velocity distributions near the windshield interior surface. At first, two cases of with- and without-duct inlet guide vanes were considered as the test condition, and then three cases of the duct inlet guide vane were tested to determine the optimum guide vane shape and their positions. The arrangement of the duct inlet guide vanes has an effect on the improved flowrate distribution at the defroster nozzle exit and near the windshield interior surface. However, the application of the lots of guide vane to control the flow direction leads to increase the flow resistance, resulting in the decreased flowrate issuing from the defroster nozzle. The shape of the duct inlet guide vane affects not only the flowrate distribution between the driver side and the assistant driver side but also the reduction of the flow resistance in the defrost duct system.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2000년도 연약지반처리위원회 학술세미나
• /
• pp.71-78
• /
• 2000

SHANSEP method involves the consolidation to stresses in excess of the preconsolidation pressure in order to overcome sample disturbance effect. The concept of SHANSEP is based on an approach to laboratory test which attempts to reproduce the in-situ conditions more closely than is possible in routine tests and evaluates normalized strength parameters for the soil as a function of OCR. But SHANSEP method can be applied only to fairly uniform clay deposits, and is unsuitable for a random deposit. In this study, CK/sub o/U triaxial compression test and incremental loading consolidation test were performed for the application of SHANSEP method on Yangsan clay. During the K/sub o/-consolidation, triaxial specimens were consolidated to stress equal to two times the in-situ vertical effective stress. And for overconsolidated condition, the specimens were swelled to a known vertical effective stress in order to have the desired OCR. With the results of CK/sub o/U triaxial compression test using the block samples, the relationship between c/sub u//σ/sub vc/' and OCR on Yangsan clay was established. For evaluating the undrained shear strength of Yangsan clay with depth, CK/sub o/U triaxial compression test was performed using the piston samples taken from Yangsan site. And also undrained shear strength was analyzed from the in-situ test such as Cone Penetration Test(CPT), Dilatometer Test(DMT), and Field Vane Test(FVT) and was compared with that of CK/sub o/U triaxial compression test.

• 한국지반공학회지:지반
• /
• 제3권2호
• /
• pp.17-28
• /
• 1987

본연구에서는 해양토질의 전단강도 산정에 대한 Cone관입시험의 신뇌도를 조사하였다. 사질토에 대하여는 내부마찰각의 불확정성을 조사하였으며, 불확정성에는 자료의 공간적 변화와 해석에 사용 되는 공식의 모텔오차 등이 있고, 그중 해석모텔의 오차가 가장 큰 불확정성이었다. 해석 방법마다 구한 내부마찰각이 서로 다르므로, 해석결과를 종합할 수 있는 주관적 견해개념(subjective opinion) 을 도입하였다. Cone관입시험을 이용하여 잡토지반에서 비배빙전단강도를 산정하기 위해서는 실훈시험이나 현장베인 시험으로 구한 전단강도와 Cone 저항력의 경험적인 관계를 이용하여야 한다. 비배수전단강도의 불확정성은 Cone 계수(Nk)의 자료 산포, Nk의 모델 오차, 이방성과 Cone 저항력의 공간적 변화 등에 기인하며, Nk의 자료산포가 가장 큰 불확정성이었다. Nk값의 산정에 이용되는 비교강도시험은 실내시험보다는 현장베인시험의 신뢰성이 더 큰 것으로 나타났다.