• 한국정보시스템학회지:정보시스템연구
• /
• 제26권4호
• /
• pp.63-85
• /
• 2017

Purpose Recently, much attention in building smart factory has dramatically increased with an emergence of the Industry 4.0. As we noted a connectivity gap between main concerns of MIS and the automated manufacturing systems such as POP and MES, it is recommended that CPS (Cyber-Physical System) can be an important building block for the smart factory and enrich the depth of MIS knowledge. Therefore, first, this study attempted to identify the connectivity gap between the traditional field of MIS (ERP, SCM, CRM, etc.) and the automated manufacturing systems, and then recommended CPS as a technical bridge to fill the gap. Secondly, we studied concepts and research trend of CPS that is believed to be a virtual mechanism to manage manufacturing systems in an integrated manner. Finally, we suggested research and educational opportunities in MIS based on the CPS perspectives. Design/methodology/approach Since this paper introduced relatively new idea of CPS originally discussed in the field of engineering, traditional MIS research method such as survey and experiment may not fit well. Therefore this research collected technical cases through literature survey in engineering fields, video clips from Youtube, and field references from various ICT Exhibitions and Conventions. Then we analyzed and reorganized them to highlight the necessity of CPS and draw some insight to share with MIS academia. Findings This paper introduced CPS to bridge the connectivity gap between the traditional MIS and automated manufacturing system (smart factory), a concern far away from the MIS academia. Further, this paper suggested future research subjects of MIS such as developing software to share big production data and systems to support manufacturing decisions, and innovating MIS curricula including smart and intelligent manufacturing technology within the context of traditional enterprise systems.

• 한국항만경제학회지
• /
• 제17권2호
• /
• pp.89-110
• /
• 2001

Recent trends in globalization and informatization underscore the importance of logistics. As a result, there is a need for skilled and specialized logisticians. Third Party Logistics (TPL) and Supply Chain Management (SCM) require logisticians with a broad base of knowledge in areas such as multimodal transport, international trade, information technology computers, finance, operations management, etc. This study conducted a survey to find out the opinions of demanders and suppliers. The results of the surrey show that there are more skilled logisticians in the field of management, computer works in manager level and system management. The survey also found that the certificate exam, which the Ministry of Construction and Transportation started in 1997 as the "Certified Logistics Manager" exam, should have more questions in areas such as foreign languages, computers, logistics information, management skills, etc. To produce better logisticians in Korea, the government will have to invest more into their education, especially near the major ports and metropolitan areas. In addition, it is important that universities and companies work together to provide students with internship and other field-experience teaming opportunities. Logistics education centers should be built at the national level. In addition, the existing certification should be divided into two separate certifications: one for ordinary logistics, and one for international logistics. To further improve the certification system, short-answer or essay questions should be added to the second exam, and an additional certification for the highest level logisticians, a so-called "professional logisticians certificate," needs to be introduced.ntroduced.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2001년도 춘계학술대회 논문집
• /
• pp.166-171
• /
• 2001

A digital seismic data acquisition and processing system using a PC has been developed in order to replace the analog data acquisition system of shallow marine seismic survey. An A/D converter that has 12bits of resolution and 225KHz of conversion rate was ued to acquire data, and a data acquisition software was developed as a Windows program which provides convenience of use. Raw data acquired at field has been saved to the hard-disk simultaneously. The signal to noise ratio, vertical and horizontal resolution could be improved by a digital data processing of the raw data. The digital processing of the raw data includss gain recovery, filtering, deconvolution, and muting. With the prediction deconvolution algorithm multiple reflections appearing on the shallow marine seismic section could be removed successfully.

• 한국지반신소재학회논문집
• /
• 제18권4호
• /
• pp.87-95
• /
• 2019

토공량 산출은 건설현장에서 최적 공사비 산정을 위한 데이터로 정확한 토공량은 토목 공사의 설계 단계에서 시공단계까지 고려되어야 하는 중요한 요소이다. 토공량 산출을 위해서는 정확한 지형 자료와 정밀한 토공 부피 계산이 필요하다. 본 논문에서는 짧은 시간에 정확한 지형 파악이 가능하고, 경제성 측면에서도 장점을 갖는 드론 측량 기술을 이용하여 고정밀 토공량 산출 시스템을 도출하였다. 시스템의 정확도 검증을 위해 현장 검증시험을 수행하였으며, 드론을 이용한 토공량 산출 결과와 GPS 측량 장비를 이용한 토공량을 비교·분석하였다. 또한, 새롭게 개발한 토공량 부피 계산 알고리즘을 기존 항공사진측량 소프트웨어(Pix4D) 계산 방식과 비교하여 정확도를 검증하였다.

• KIEAE Journal
• /
• 제5권1호
• /
• pp.11-18
• /
• 2005

The optimized HVAC system design in tall buildings enable owners to save unnecessary energy consumption and residents to have comfort environments. The purpose of this study is to develop design process for optimized HVAC system design in tall buildings. As basic researches, literature researches and case studies of HVAC system design in tall buildings were performed. Survey was processed among expert in the field and key considerations on HVAC system design were drew as conclusions. With these conclusions, studies were performed on effects of wind velocity, outdoor air temperature, and solar radiation that are main factors of load calculation in tall buildings. Finally, air-tightness and stack effect were analyzed and estimated by literature studies, field measurements and computer simulations.

• 한국산업보건학회지
• /
• 제31권3호
• /
• pp.266-273
• /
• 2021

Objective: The objective of this study was to suggest improvement methods for investigations and systems through a review of musculoskeletal risk factor investigation reports conducted in the workplace. Methods: A total of 34 reports on musculoskeletal risk factor investigations were reviewed. To confirm the appropriateness of the evaluation, reevaluation was conducted through a field investigation using other evaluation tools. In order to understand the effectiveness of the improvement plan, a survey was conducted with those in charge of tasks with ergonomic burdens. Results: As a result of performing a field survey using the work sampling method recommended by the KOSHA (Korea Occupational Safety and Health Agency) for ten tasks, eight tasks were determined to pose an ergonomic burden. When 30 tasks were evaluated with RULA (rapid entire body assessment), 90% of them were evaluated at a higher level than the results of the workplace survey. Among the improvement measures, only 36% of the field workers affirmed them, and in only 19% of the workplaces were actual improvements made. Conclusions: In order to improve the ergonomic investigation system for risk factors in the ergonomic burden task, it is necessary to secure the objectivity of the evaluation performed by the institution and enable the active participation of workers in improvement activities.

• 설비공학논문집
• /
• 제12권4호
• /
• pp.325-336
• /
• 2000

During the last decade, an increasing interest in Underfloor Air-Conditioning(UFAC) systems has emerged. The purpose of this paper is to evaluate comprehensively the indoor environmental performance of office buildings with UFAC system in order to develope the design prototype of this system. In this paper, the physical measurements and the interviewing survey of occupant's sensation responses to the environment were carried out. Measurements and survey were made of the thermal environmental factors such as air temperature, relative humidity, air velocity, globe temperature, and the other several environmental factors such as the sound level and the illuminance of working plane, etc. And, the air quality was evaluated by measuring the concentration of suspended particles, carbon monoxide, and carbon dioxide in the room. Furthermore, the paper appraises the various indoor environmental factors of the room by using post-occupancy evaluation(POE) method in office building with UFAC system, and thus, it suggests the basic data for assessing the indoor comfort based on field measurements and survey.

• 복식
• /
• 제67권4호
• /
• pp.116-130
• /
• 2017

The aim of this study is to investigate the general status, operating status, and the satisfaction level of participating textile-clothing companies involved in the Work and Learning Dual System in Daegu. The general status and operating status of the participating companies are as follows. As of March 2016, 34 of the 43 companies in Daegu participated in this survey, and they were divided into three areas of textile: weaving, dyeing & finishing, and apparel manufacturing. The breakdown is as follows: 14 dyeing & finishing companies (41.2%), 13 apparel manufacturing companies (38.2%), and 7 textile weaving companies (23.6%). The results of the survey showed that 91.2% of the companies decided to participate in the system to cultivate their employees into experts in the field. The satisfaction rate of the theoretical education and training institutions was 3.88 out of 5 points. In particular, the satisfaction rate of the textile weaving companies was as high as 4.29, and the satisfaction level of the dyeing & finishing companies was higher than the average of 3.71. The overall satisfaction rate for the work-related paradigm was 3.97 out of 5 points. The results of this survey can be used to conclude that the Work and Learning Dual System is operating as it was intended to be by the government.

• 한국재난정보학회 논문집
• /
• 제19권1호
• /
• pp.128-137
• /
• 2023

연구목적: 건설 현장에서 고소 작업시 일부 사용하고 있는 시스템비계를 선박건조 및 플랜트 산업현장의 다양한 형태의 구조물에 확대 적용이 가능토록 방법을 연구하여 품질향상과 안전성을 높이는 방안을 제시하고자 한다. 연구방법: 8개 기업을 대상으로 실태조사를 실시하였으며, 문헌이나 인터넷 조사등을 분석하여 직접 현장조사와 실무자, 전문가의 의견을 반영한 방안을 수립하였다. 연구결과: 관련 특허 분석, 업체와의 FGI 등을 통한 분석하고 시공업체의 전문성 제고를 위한 개선 방안과 다양한 형태에도 적용이 가능한 자재의 연구 개발을 통한 적용 확대의 가능성을 발견하였다 결론:시스템비계는 안전측면으로 그 중요성이 높으나 전 세계적으로 관련 연구는 부진한 편이다. 이에 software적인 전문성 제고와 다양한 형태에도 적용이 가능한 사용자재의 개발연구로 품질 및 안전에 대한 요구를 충족할 수 있을 것이다.

• 공학교육연구
• /
• 제23권4호
• /
• pp.66-75
• /
• 2020

This study was conducted using the literature review and survey research to analyze the operational status and effectiveness of the single-track accredited program, which has been mandatory since 2016. The research targets to achieve the purpose of the study were the nationwide engineering education accreditation system operating colleges, departments, and engineering education innovation centers. Finally, 183 copies were collected from faculty members at 69 colleges and 554 copies at the department level. As a result of the survey, the college recognized more positively about the operation of the single-track accredited program, and more than 50% of respondents said that there were difficulties due to the operation of the system. The contents required were analyzed and presented. Based on this, the engineering education accreditation system, including the single-track accredited program, suggested the direction of support at the government level and the ABEEK level to better settle down in the field of engineering colleges.