• Journal of The Korean Society of Grassland and Forage Science
• /
• v.19 no.1
• /
• pp.57-62
• /
• 1999

A field experiment was carried out to compare the growth characteristics, forage yield and nutritive value of four $sorghum{\times}sudangrass$ hybrids (Sorghum bicolor (L.) Moench) grown under application of animal manure in 1995. The application amount of animal manure were 40MT in cattle manure, 30MT/ha in swine and poultry manure. The four NLCF's recommended hybrids used in this study were Pioneer 988, TE-Haygrazer and NC+ 855 (heading type), and Jumbo(headless type). The plant height was ranged between average 219 and 234cm, regardless of animal manure type and cultivar. NC+ 855 was classified as early maturing cultivar(first heading date was 1st July), and then TE-Haygrazer(4th July), and 988 was latest maturing type(12th July) among the cultivars used. Jumbo was going on vegetative stage in this experiment. The dry matter(DM) yield of four $sorghum{\times}sudangrass$ hybrids were ranged between 11.27 and 13.92MT in cattle manure, 11.46 and 12.77MT in swine manure, and 9.70 and 13.52MT/ha in poultry manure. No significant differences in forage yield were found among the cultivars used, but the DM yield of NC+ 855(13.40 MT/ha) was slightly higher than those of 988(11.31MT), Jumbo(11.26MT) and TE-Haygrazer(11.77MT). The nutritive value of $sorghum{\times}sudangrass$ hybrids was very similar among the cultivars. The crude protein yields were 1,526kg in 988, 1,429kg in Jumbo, 1,502kg in TE-Haygrazer, and 1,659kg in NC+ 855. However, there were no significant differences in protein yield. In conclusion, there were no differences of forage yield and nutritive value among four recommended $sorghum{\times}sudangrass$ hybrids, although maturity was different among heading-type hybrids.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.15 no.4
• /
• pp.275-282
• /
• 2009

PAHs(Polycyclic Aromatic Hydrocarbons) compounds may enter into the marine environment in a number of ways, and PAHs in coastal area and estuary adjacent to urban area and industrial activities region are mainly introduced into marine environment via atmosphere or river. The field surveys to evaluate the pollution of PAHs in rivers of Jinhae bay were carried out in August, 2008. The water samples collected from seven main rivers and Deokdong WWTP(Waste water Treatment Plant) which lead to Jinhae bay. 16 PAHs which had been selected as priority pollutants by EPA were analyzed. The range and mean of dissolved Total PAHs concentrations in the rivers and Duckdong WWTP that lead to Jinhae bay were shown to be 9.79~128.25(mean 36.94)ng/L, while the range and mean of Total PAHs concentrations in SPM(Suspended Particulate Matter) were shown to be 1,81434~8,893.37(mean 4,657.73)${\mu}g$/kg dry wt. The dissolved Total PAHs and Total PAHs in SPM were shown to be high concentrations in the Semhocheon which leads to Masan bay that is the most polluted area of Jinhae bay, while those were shown to be low concentrations at rivers which lead to the west area of the bay. The ranges and means of the loading fluxes from rivers and Duckdong WWTP were calculated at 0.06~12.05(mean 1.86)g/day for dissolved Total PAHs and at 0.12~16.00(mean 2.41)g/day tor Total PAH in SPM. The loading flux of Total PAHs from Duckdong WWTP was shown to be the greatest, occupying more than 80% of Total loading flux from all rivers and WWTP to Jinhae bay. The composition patterns of PAHs compound by the number of benzene ring between dissolved PAHs and PAHs of SPM were different each other. Low molecuar weight PAHs of dissoloved compounds were in high concentration, while high molecular weight PAHs of SPM were in high concentration. These results were due to physical and chemical characteristics of PAHs and were similar to those of other studies. The total PAHs concentrations of dissolved and SPM in this study are lower than those of other studies. The extent of PAHs pollution appeared to be not serious in reverine waters of Jinhae bay.

• Journal of Hospice and Palliative Care
• /
• v.13 no.1
• /
• pp.32-40
• /
• 2010

Purpose: The survey was aimed to provide basic data to develop a certification system for hospice and palliative care professionals. Methods: National Cancer Center (NCC) and the Korean Society for Hospice & Palliative Care (KSHPC) conducted the survey for hospice and palliative care professionals who worked at 34 Palliative care units designated by the Ministry of Health, Welfare, and Family Affairs (MW) and the members of the KSHPC. The survey was conducted via e-mail from June 17 to 23, 2009. Total 220 professionals were surveyed. Results: Most of the hospice and palliative care professionals reported a great need for certification system: Physician, 90% (n=51) nurse, 84% (n=134) social worker, 89% (n=35). In regard with the requirement for the certification, a majority of physicians (46%) preferreddiploma course, while social workers (46%) preferred training course for medical social workers. Concerning the certification body, physician (45%) preferred the KSHPC and the MW almost equally, while nurses (50%) and social workers (60%) preferred the MW highly. As for the body to develop and accredit advance training course for each professionals, most of the physicians (51%) preferred the KSHPC, whereas nurses and social workers preferred collaboration of the MW (or NCC) with the professional society, such as the KSHPC (23%), the Korean Hospice & Palliative nurses association for nurses (21%), or the Korean association of (medical) social workers (37%). Lastly, all respondents preferred the course format of once a week, full day, and some field study at weekend. Conclusion: Korean hospice and palliative care professionals identified the great need for the certification system, therefore, the adequate system development must be followed to reflect their voice.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.48 no.6
• /
• pp.473-478
• /
• 2003

This study was conducted to clarify the effects of duck free-ranging time on the growth and behavior patterns of duck, pH and dissolved oxygen of irrigation water, and growth and yield of the rice plants in paddy fields. Two paddy fields with each 5 aye were used for 12 hours duck free-ranging plot (12HFR) and 24 hours duck free-ranging plot(24HFR). Body weight gain of the duck was not different between 12HFR and 24HFR. Eating and feather grooming behavior in the 12HFR were significantly longer than those of 24HFR, but other behavior patterns were not so. Working behavior and activities of duck in paddy fields tended to be longer in the 12HFR than in 24HFR. However, any difference was not found on staying time of duck in paddy fields. Although it was not statistically significant, pH and dissolved oxygen of irrigation water tended to be higher in the 12HFR than in 24HFR. The plant height of rice in the 12HFR was significantly shorter than that of 24HFR during the latter half period. The number of tillers per hill was significantly increased in the 24HFR than in 12HFR. The shoot dry weight of rice in the 12HFR was significantly less than in the 24HFR during the heading stage of rice plant, but the root dry weight was not different. The number of spikelets per panicle was significantly less in the 12HFR than in 24HFR, however the percentage of ripened grains was significantly higher in the 12HFR. The yield of rice was not significantly different between the treatments. In conclusion, the free-ranging time of duck for 12 hours in paddy fields promoted eating and working behavior of the ducks. Free-ranging time did give effects on rice traits such as the number of tillers per hill, plant height, shoot dry weight of the rice plant, and spikelet number and percentage of ripened grain. However, the duck growth, pH and dissolved oxygen of irrigation water, and paddy rice yield were not affected by duck free-ranging time. These results might suggest that almost same effect as in 24 hours of free-ranging can be obtained with only 12 hours of free-ranging in daytime.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.26 no.4
• /
• pp.249-256
• /
• 2006

The object of this experiment was to suggest the optimum autumn sown small forage crops as next forage crops harvested maize in Daejeon area. The field trials was conducted from 2002 to 2004 at Chungnam National University in order to evaluate the dry matter yield and qualities of the autumn sown small forage crops. The experiment was consisted of split plots (main plot : forage crops as rye, barley and wheat, and sub plot 4 harvest stages as boot, heading, milk and dough) design with three replications. The average DM yield for 2 years of rye was higher than that of other forage crops (p<0.01). As stages proceed, the DM yield tended to increase in all forage crops (p<0.01). In chemical composition, they had a difference on forage crops and stages. The crude protein (CP) was higher in barley (p<0.01), but fibrous contents such as NDF, ADF, cellulose and lignin were lower in wheat than in the other forage crops (p<0.01). In Daejeon area, although barley and wheat at milk and dough stages were observed with maximum yield and high quality as autumn sown forage crops, due to late harvesting periods, it is difficult to utilize them as previous forage crops seeded in maize. Based on the result mentioned above, it is concluded that rye harvested at boot to heading stages is the most suitable fur autumn sown small forage crops in Daejeon area. Meanwhile, in order to have the option of nutritional value in wheat and barley, they need to be supplied early maturing and high-yield variety of wheat and barley.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.5 no.1
• /
• pp.62-72
• /
• 1985

In order to find out the effects of seeding time on growth, dry matter production and nutritive content of Pioneer 931, Pioneer 988 and Piper, this study was carried out on the experimental field of Livestock Experiment Station in 1981-83. Seeding time were 7 with 14-day interval from April 16 to July 9. The results are summarized as follows: 1. It tool about 12 to 13 days from seeding to emergence in case of Mid-April seeding and 7 to 8 days in Late-June. Earlier seeding, more longer growth period from emergence to heading they required. 2. Plant height of Pioneer 931 seeded lately was longer than 4.5 meters in primary growth and Sudangrass was about 2.0 to 2.5 meters. Leaf area was the greatest in Mid-August by early seeding but it was increased until Early-October by late seeding. 3. Sorghum gas brought the highest yield in dry mater and Sudangrass the lowest. In general dry matter yield reduced gradually in response to later seeding but Pioneer 931 has brought more than 10 tons per hecter until Late-June. 4. Relative Growth Rate, Leaf Area Ratio and Leaf Weight of all varieties decreased in accordance with growth development. 5. Crude protein content of leaf was higher than stem and the younger the plants, the more protein they contain. Nitrogen Free Extract was just opposite to crude protein.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.27 no.3
• /
• pp.183-188
• /
• 2007

This study was conducted to determine the effects of seeding date on agronomic characteristics, productivity and feed value of Italian ryegrass, barley and rye during cropping after rice in Suwon, middle region of Korea, during 2004 and 2005. In general, early seeding (26 September) showed longer plant length and branch numbers per square meter than late sowing (11 October). Italian ryegrass had more early seeding effect than barley and rye. The yield of each plant was affected by sowing date in all experiments: the earlier seeding had higher yields than late seeding. In case of Italian ryegrass and barley as late-heading varieties showed more early seeding effect than rye. On the other hand, feed value tended to respond differently to yields. The feed value of each plant were based on liquid swine manure (12%) > composted cattle manure (7%) > composted swine manure (2%). The present results highlight the earlier planting obtained higher yield compared to those planted conventionally.

• Resources Recycling
• /
• v.16 no.3 s.77
• /
• pp.19-26
• /
• 2007

The bottom ash of municipal solid waste incineration generated during incineration of municipal solid waste in metropolitan area consists of ceramics, glasses, ferrous materials, combustible materials and food waste and so on. Although the ferrous material was separated by the magnetic separation before the incineration process, of which content accounts for about $3{\sim}11%$ in bottom ash. The formation of a $Fe_3O_4-Fe_2O_3$ double layer(similar to pure Fe) on the iron surface was found during air-annealing in the incinerator at $1000^{\circ}C$. A strong thermal shock, such as that takes place during water-cooling of bottom ash, leads to the breakdown of this oxidation layer, facilitating the degradation of ferrous metals and the formation of corrosion products and it existed as $Fe_2O_3,\;Fe_3O_4\;and\;FeS_2$. So, many problems could occur in the use of bottom ash as an aggregate substitutes in construction field. Therefore, in this study, the separation of ferrous materials from municipal solid waste incineration bottom ash was investigated. In the result, the ferrous product(such as $Fe_2O_3,\;Fe_3O_4,\;FeS_2$ and iron) by magnetic separator at 3800 gauss per total bottom ash(w/w.%) accounted for about 18.7%, and 87.7% of the ferrous product was in the size over 1.18 mm. Also the iron per total bottom ash accounted for about 3.8% and the majority of it was in the size over 1.18 mm.

• Progress in Medical Physics
• /
• v.17 no.3
• /
• pp.131-135
• /
• 2006

A commercial ion chamber matrix was examined the characteristics and its performance for radiotherapy qualify assurance. The device was the I'mRT 2D-MatriXX (Scanditronix-Wellhofer, Schwarzenbruck, Germany). The 2D-MatriXX device consists of a 1020 vented ion chamber array, arranged in $24{\times}24cm^2$ matrix. Each ion chamber has a volume of $0.08cm^3$, spacing of 0.762 cm and minimum sampling time of 20 ms. For the investigation of the characteristics, dose linearity, output factor, short-term reproducibility and dose rate dependency were tested. In the testing of dose linearity. It has shown a good signal linearity within 1% in the range of $1{\sim}800$cGy. Dose rate dependency was found to be lower than 0.4% (Range: 100-600 Mu/min) relative to a dose rate of 300 Mu/min as a reference. Output factors matched very well within 0.5% compared with commissioned beam data using a ionization chamber (CC01, Scanditronix-Wellhofer, Schwarzenbruck, Germany) in the range of field sizes $3{\times}3{\sim}24{\times}24cm^2$. Short-term reproducibility (6 times with a interval of 15 minute) was also shown a good agreement within 0.5%, when the temperature and the pressure were corrected by each time of measurement. in addition, we compared enhanced dynamic wedge (EDW, Varian, Palo Alto, USA) profiles from calculated values in the radiation planning system with those from measurements of the MatriXX. Furthermore, anon-uniform IMRT dose fluence was tested. All the comparison studies have shown good agreements. In this study, the MatriXX was evaluated as a reliable dosimeter, and it could be used as a simplistic and convenient tool for radiotherapy qualify assurance.

• Progress in Medical Physics
• /
• v.17 no.3
• /
• pp.179-186
• /
• 2006

Purpose: Photon beam data of linear accelerators in Korea are collected, analyzed, and a simple method for checking and verifying the dose calculations in a TPS are suggested. Materials and Methods: Photon beam data such as output calibration condition, output factor, wedge factor, percent depth dose, beam profile, and beam quality were collected from 26 institutions in Korea. In order to verify the accuracy of dose calculation, ten sample planning tests were peformed. These Include square, elongated, and blocked fields, wedge fields, off-axis dose calculation, SSD variation. The planned data were compared to that of manual calculations. Results: The average and standard deviation of photon beam quality for 6, 10, and 15 MV were $0.576{\pm}0.005,\;0.632{\pm}0.004,\;and\;0.647{\pm}0.006$, respectively. The output factors of 6 MV photon beam measured at depth of dose maximum for $5{\times}5cm,\;15{\times}15cm,\;20{\times}20cm\;were\;0.944{\pm}0.006,\;1.031{\pm}0.006,\;and\;1.055{\pm}0.007$. For 10 MV photon beam, the values were $0.935{\pm}0.006,\;1.031{\pm}0.007,\;1.054{\pm}0.0005$. The collected data were not enough to calculate average, the output factors for 15MV photon beam with field size of $5{\times}5cm,\;15{\times}15cm,\;20{\times}20cm\;were\;0.941{\pm}0.008,\;1.032{\pm}0.004,\;1.049{\pm}0.014$. There was seven institutions $e{\times}ceeding$ tolerance when monitor unit values calculated from treatment planning system and manually were compared. The measured average MU values for the machines calibrated at SAD setup were 3 MU and 5 MU higher than the machines calibrated at SSD for 6 MV and 10 MV, respectively except the wedge case. When the wedges were inserted, the MU values to deliver 100 cGy to 5 cm depends on manufactures. When the same wedge angle was used, Siemens machine requires more MUs then Varian machine. Conclusion: In this study, photon beam data are collected and analyzed to provide a baseline value for chocking beam data and the accuracy of dose calculation for a treatment planning system.