• 터널과지하공간
• /
• 제16권3호
• /
• pp.241-250
• /
• 2006

LNG지하저장 핵심기술 중 하나인 ice ring 형성을 열-수리 역학 해석을 통해 분석하였다. ice ring은 극저온물질의 누출에 대한 이차방벽 역할과 지하수의 저장공동 침투에 대한 일차방벽역할을 수행한다. 따라서 ice ring의 두께와 위치는 콘크리트와 PU foam 및 멤브레인으로 구성된 일차방호재의 무결성 유지에 있어서 핵심인자가 된다. 수치해석을 통해 이러한 ice ring의 위치와 두께를 추정하였으며 온도와 지하수위 결과를 계측치와 비교하였다. 수치해석결과는 PU foam 열전도도의 온도의존성과 지하수의 상변화를 고려한 경우 파일럿 공동에서 측정한 계측치와 잘 일치하였다. 본 논문에서 제시한 수치해석 기법은 실규모 저장시설의 설계에 있어서 ice ring 형성을 모델링하는 데에 바로 사용될 수 있을 것으로 판단된다.

• 대한기계학회논문집
• /
• 제17권9호
• /
• pp.2294-2303
• /
• 1993

This paper investigated the characteristics of the turbulent incompressible flow past the orifice ring in an axi-symmetric pipe. The flow field was the turbulent pulsatile flow for Reynolds number of $2{\times}10^{5}$ which was defined based on the maximum velocity and the pipe diameter at the inlet, with oscillating frequence $(f_{os})=1/4{\pi}$ which was considered as quasi-steady state frequence. In the present investigation, finite analytic method was used to solve the governing equations in Navier Stokes and turbulent transport formulations. Particularly at high Reynolds number and low oscillation frequency, the effects of orifice ring on the flow were numerically investigated. The separation zone behind the orifice ring during the acceleration phase was found to be decreased. However, during the deceleration phase, the separation behind the orifice ring for pulsatile flow continuously grow to a size even larger than that in steady flow. The pressure drop in steady flow was found to be constant and always positive while for pulsatile flow the pressure drop change with time. And large turbulent kinetic energy, dissipation rate were found to be located in the region where the flow passes through the orifics ring. The maximum turbulent kinetic energy, generally occurs along the shear layer where the velocity gradient is large.

• 한국전산유체공학회지
• /
• 제21권2호
• /
• pp.40-46
• /
• 2016

In the paper, a study on the analysis of fouling effect of the venturi flowmeter is described. In the research flow field solutions about the venturi flowmeter with fouling are obtained and then the effects on fouling states by inserting a ring into the throat of venturi flowmeter are studied. As the result shows, it is found that the inserted ring reduces the fouling effect due to the flow separation occurring at the ring. Consequently, a venturi flowmeter with ring shows smaller pressure loss differences than the original configuration with no ring on fouling state. This research suggests an efficient and economic method of inserting a ring to reduce the pressure loss effects due to fouling.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2010년도 하계학술대회 논문집
• /
• pp.288-288
• /
• 2010

In this study radio rotatiing field is used in order to form the stable reversed field configuration. The experimental study removing the flux conserving ring not so as to conserve toroidal flux, it was found that there occurred a rapid formation of a stable reversed field configuration, in which toroidal flux was increased shaping reversed field configuration and F-$\Theta$ locus traced close to BFM because it started below F value.

• Kyungpook Mathematical Journal
• /
• 제57권2호
• /
• pp.187-191
• /
• 2017

Let R be a domain with quotient field K and prime subring A. Then R is integral over each of its subrings having quotient field K if and only if (A, R) is a survival pair. This shows the redundancy of a condition involving going-down pairs in a earlier characterization of such rings. In characteristic 0, the domains being characterized are the rings R that are isomorphic to subrings of the ring of all algebraic integers. In positive (prime) characteristic, the domains R being characterized are of two kinds: either R = K is an algebraic field extension of A or precisely one valuation domain of K does not contain R.

• 동력기계공학회지
• /
• 제14권2호
• /
• pp.65-70
• /
• 2010

Retaining rings are used to support the field winding end turns from the centrifugal force by the high speed of the field and these are the overstressed parts among the generator parts. There have been several retaining failures in Europe and America, all attributable to stress corrosion cracking in 18Mn-5Cr steel. Since then, each manufacture companies have developed a good 18Mn-5Cr steel in temperature, strength characteristic and it is used in many field now. From many findings and test results, we could conformed that the failure might be grown in the overstressed condition unrelated to the moisture particle.

• The Plant Pathology Journal
• /
• 제24권2호
• /
• pp.125-130
• /
• 2008

Various kinds of leaf spots and blights were found in kiwifruit (Actinidia deliciosa) orchards on 2006 in Korea. Disease incidences were quite variable between open-field and rain-proof shelter. Rate of diseased leaves was recorded as about 70% at open-field orchards in late season but use of rain-proof vinyl shelters alleviated the disease incidences by 20%. Angular leaf spots appeared at early infection stage on June and several other symptoms were also recognized as the disease developed afterward. On September, brown leaf blights were the most frequent, followed by grayish brown ring spots, silvering gray leaf blights, zonate leaf blights, dark brown ring spots and angular leaf spots at open-field orchards. Four fungal species were frequently isolated from the disease symptoms. Phomopsis sp. was the most predominant fungus associated with the leaf spot and blight symptoms on kiwifruit, followed by Glomerella cingulata, Alternaria alternata and Pestalo-tiopsis sp. Phomopsis sp. was commonly isolated from angular leaf spots, silvering gray leaf blights, and zonate brown leaf blights. G. cingulata, A. alternata and Pestalotiopsis sp. were isolated from grayish brown ring spots (anthracnose), brown ring spots and zonate dark brown leaf blights. Typical symptoms appeared on the wounded and unwounded leaves, which were inoculated by each of Phomopsis sp., G. cingulata, and Pestalotiopsis sp., but A. alternata caused symptoms only on the wounded leaves.

• 디지털융복합연구
• /
• 제19권11호
• /
• pp.341-349
• /
• 2021

최근 조명 산업이 중요한 분야로 인식되면서 PQR (Photonic Quantum Ring) 소자는 LED(Light Emitting Diode)를 대체할 수 있는 차세대 광원이 될 전망이다. 본 연구에서는 기존 연구와 유사한 결과를 검증하고, 소자의 광특성을 분석하기 위해 광섬유가 연결된 스테이지에 x, y, z 좌표를 입력하면 자동으로 이동하며, 또한, 소자에 광섬유를 근접시키는 NSOM (Near field scanning optical microscopy) 장치를 추가한 측정 시스템을 이용하여 소자의 광특성 실험과 공진 및 어레이 소자의 광특성 시뮬레이션을 통해 조명용 소자로 가능성을 검증하고자 하였다. 이를 위해 메사와 홀 형태가 동시에 존재하는 메사 직경 40㎛, 홀 직경 3㎛의 소자를 제작하여 소자의 근접장으로 PQR 소자는 ㎂에서 동작하며, 메사와 홀 소자는 서로 독립적으로 구동됨을 관찰하였다. 위치에 따른 소자의 광파장 스펙트럼을 측정하여 메사와 홀 소자에 의한 커플링 현상을 처음으로 확인하였다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2008년도 춘계학술대회논문집
• /
• pp.468-471
• /
• 2008

Sound manipulation is to control sound field using multiple sound sources for appropriate purposes. In linear acoustics, a sound can be constructed by superimposing several fundamental sound fields such as a planewave and sphere shape sound field. That is how we manipulate sound field. In this paper, we introduce the theory of sound manipulation and its applications from the examples of the generation of fundamental sound field: a circle, a ring shape sound field and a planewave field.

• 대한수학회보
• /
• 제47권5호
• /
• pp.907-913
• /
• 2010

Let D be an integrally closed domain with quotient field K, * be a star operation on D, X, Y be indeterminates over D, $N_*\;=\;\{f\;{\in}\;D[X]|\;(c_D(f))^*\;=\;D\}$ and $R\;=\;D[X]_{N_*}$. Let b be the b-operation on R, and let $*_c$ be the star operation on D defined by $I^{*_c}\;=\;(ID[X]_{N_*})^b\;{\cap}\;K$. Finally, let Kr(R, b) (resp., Kr(D, $*_c$)) be the Kronecker function ring of R (resp., D) with respect to Y (resp., X, Y). In this paper, we show that Kr(R, b) $\subseteq$ Kr(D, $*_c$) and Kr(R, b) is a kfr with respect to K(Y) and X in the notion of [2]. We also prove that Kr(R, b) = Kr(D, $*_c$) if and only if D is a $P{\ast}MD$. As a corollary, we have that if D is not a $P{\ast}MD$, then Kr(R, b) is an example of a kfr with respect to K(Y) and X but not a Kronecker function ring with respect to K(Y) and X.