• Korean Journal of Organic Agriculture
• /
• v.9 no.3
• /
• pp.45-71
• /
• 2001

The duck-rice forming system is increasingly spread up throughout Korea since 1992. It is discussed the rice field, rice quality, weed and pest management in the duck-rice weeding system compared to conventional farming system. Moreover the optimizing duck population, system management and fertilizer application rate were reported. Energy input and output by duck-rice farming system were carefully compared with those of low input sustainable paddy field and conventional farming paddy field. To find out the environmentally sound function of duck-rice system, the total nitrogen in paddy soil and paddy water, and nitrogen cycle in paddy rice cultivation system were analysed. finally the input and output were calculated, and ecological characteristic were determined in terms of nitrogen balance, labor input, animal input, renewable energy input, turnover of soil organic matter, energy loss, non-renewable indirect and direct energy input. It was concluded duck-rice weeding system could be recommended in terms of net only environmentally sound, but also farmer's income. But there are still some research needs for successful adaption of duck-rice farming to investigate to determine the optimal population of duck in rice paddy field unit, release time of duckling, duck management after release, and strategy for duck marketing and duck processing.

• Journal of Korean Society for Atmospheric Environment
• /
• v.15 no.5
• /
• pp.687-696
• /
• 1999

Characteristics of four publicly-available accidental release models, ALOHA, SLAB, HGSYSTEM, and DEGADIS, are compared. These models are world-widely used and recently recommended by the Chemical Dispersion and Consequence Assessment(CDCA) Working Group of the United States as models applicable to generally broad safety-basis documentation applicatons. Four release scenarios are assumed by referring to the usage and storage conditions of toxic substances in the field as well as the USEPA model guideline(1993). Sensitivity of impact radius by varying meteorological conditions is tested in typical and worst-case meteorological conditions. The results show that ALOHA generally gives conservative estimates and the results from HGSYSTEM are sensitive to variations in meteorological conditions.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.44 no.3
• /
• pp.230-235
• /
• 1999

To study the effects of an urease inhibitor, N-(n-butyl)-thiophosphoric triamide (NBPT), and a nitrification inhibitor, dicyandiamide (DCD), on nitrogen losses and nitrogen use efficiency, urea fertilizer with or without inhibitors and slowrelease fertilizer (synthetic thermoplastic resins coated urea) were applied to direct-seeded flooded rice fields in 1998. In the urea and the urea+DCD treatments, NH$_4$$^{+}$ -N concentrations reached 50 mg N L$^{-1}$ after application. Urea+NBPT and urea+ NBPT+DCD treatments maintained NH$_4$$^{+}$ -N concentrations below 10 mg N L$^{-1}$ in the floodwater, while the slow-release fertilizer application maintained the lowest concentration of NH$_4$$^{+}$ -N in floodwater. The ammonia losses of urea+NBPT and urea+NBPT+DCD treatments were lower than those of urea and urea+DCD treatments during the 30 days after fertilizer application. It was found that N loss due to ammonia volatilization was minimized in the treatments of NBPT with urea and the slow-release fertilizer. The volatile loss of urea+DCD treatment was not significantly different from that of urea surface application. It was found that NBPT delayed urea hydrolysis and then decreased losses due to ammonia volatilization. DCD, a nitrification inhibitor, had no significant effect on ammonia loss under flooded conditions. The slow-release fertilizer application reduced ammonia volatilization loss most effectively. As N0$_3$$^{[-10]}$ -N concentrations in the soil water indicated that leaching losses of N were negligible, DCD was not effective in inhibiting nitrification in the flooded soil. The amount of N in plants was especially low in the slow-release fertilizer treatment during the early growth stage for 15 days after fertilization. The amount of N in the rice plants, however, was higher in the slow-release fertilizer treatment than in other treatments at harvest. Grain yields in the treatments of slow-release fertilizer, urea+NBPT+ DCD and urea+NBPT were significantly higher than those in the treatments of urea and urea+DCD. NBPT treatment with urea and the slow-release fertilizer application were effective in both reducing nitrogen losses and increasing grain yield by improving N use efficiency in direct-seeded flooded rice field.field.

• Korean Journal of Soil Science and Fertilizer
• /
• v.35 no.6
• /
• pp.381-386
• /
• 2002

A field experiment was conducted to evaluate the effect of split-application of slow-release fertilizer on the tea plant. The yield of the 1st harvested tea leaves had increased 12% in the slow-release fertilizer(two time split manuring) compared with the traditional manuring(four time split manuring), but that of the slow-release fertilizer to one time split manuring had decreased $6{\pm}3%$. In case of the 1st harvested leave, the contents of chemical components related to quality such as total nitrogen, total amino acid, chlorophyll, vitamin C and theanine were somewhat higher in the leaves of slow-release fertilizer(two time split manuring) treatment than in the traditional manuring, but that of tannin was low. The one time split manuring of slow-release fertilizer had a contrary tendency with two time split manuring treatment. In scoring test, appearance and quality of green tea were more excellent in the two time split manuring compared with one time split manuring of slow-release fertilizer and with the traditional manuring (four time split manuring). Therefore, use of slow-release fertilizer increased yield and quality of tea leaves, and decreased loss of nitrogen, phosphate and potassium.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.44 no.3
• /
• pp.290-297
• /
• 2011

The phenology of Campylaephora hypnaeoides J. Agardh and optimal conditions for carpospore release, growth and reproduction were examined in the field and in the laboratory from January to December 2007. In the field population of C. hypnaeoides, approximately 50% of the plants were vegetative during the study period. Additionally, the percentages of carposporophytes and tetrasporophytes were maximal in April (37%) and June (57%), respectively. Maximum growth in plant length, dry weight, and hook number coincided with the tetrasporophyte reproductive peak in the field. In culture, carpospore release, sporeling growth and reproduction were affected by environmental factors such as daylength, temperature, and salinity. The liberation of carpospores was maximum under continuous light and at a combination of $15^{\circ}C$ and $10\;{\mu}mol$ photons $m^{-2}\;s^{-1}$. Maximum growth of tetrasporophyte sporelings occurred at a combination of $20\;{\mu}mol$ photons $m^{-2}\;s^{-1}$ of constant light and $25^{\circ}C$. However, the growth of gametophyte sporelings was maximal under $40\;{\mu}mol$ photons $m^{-2}\;s^{-1}$ of constant light and in a combination of $20^{\circ}C$ and 35 psu. The tetrasporophyte sporelings were grew faster than gametophytes, indicating that gametophyte- and tetrasporophyte-sporelings have different physiological responses to irradiance and temperature. Tetrasporangial branches and cystocarps of C. hypnaeoides were produced from carpospores and tetraspores within 1 month, and they were stimulated at high temperature and irradiance levels. In conclusion, C. hypnaeoides should be seeded using carpospores during early winter (November-December) because cystocarps are easily identified by fishermen, and tetrasporophytes grow faster than gametophytes.

• 전기의세계
• /
• v.27 no.3
• /
• pp.31-35
• /
• 1978

In this paper, in order to clarify the mature of traps in polymer, the thermally stimulated current (TSC) measurements were mad on high density polyethylene by changing the condition of the high-field treatment such as the strength of the field (Fe), the treatment time (te) and the heating rate (.betha.). In addition, the TSC measured from the HDPE was compared with that from LDPE having different crystallinity. The obtained results can suggest that the trapping proceeds during the high-field treatment and the trap associated with the peak P$_{2}$ may have the closed relation to drystallinity and the release of trapped charge is enhanced by the molecular motion.

• Smart Structures and Systems
• /
• v.22 no.3
• /
• pp.259-276
• /
• 2018

This paper studies the energies and energy release rate (ERR) for the initially rotationally symmetric compressed (or stretched) in the inward (outward) radial direction of the PZT/Elastic/PZT sandwich circular plate with interface penny-shaped cracks. The investigations are made by utilizing the so-called three-dimensional linearized field equations and relations of electro-elasticity for piezoelectric materials. The quantities related to the initial stress state are determined within the scope of the classical linear theory of piezoelectricity. Mathematical formulation of the corresponding problem and determination of the quantities related to the stress-strain state which appear as a result of the action of the uniformly normal additional opening forces acting on the penny-shaped crack's edges are made within the scope of the aforementioned three-dimensional linearized field equations solution which is obtained with the use of the FEM modelling. Numerical results of the energies and ERR and the influence of the problem parameters on these quantities are presented and discussed for the PZT- 5H/Al/PZT-5H, PZT-4/Al/PZT-4, $BaTiO_3/Al/BaTiO_3$ and PZT-5H/StPZT-5H sandwich plates. In particular, it is established that the magnitude of the influence of the piezoelectricity and initial loading on the ERR increases with crack radius length.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.17 no.2
• /
• pp.313-330
• /
• 1993

The propagating crack problems under dynamic plane mode in orthotropic material is studied in this paper. To analyze the dynamic fracture problems in orthortropic material, it is important to know the dynamic stress components and dynamic displacement components around the crack tip. Therefore the dynamic stress components of dynamic stress field and dynamic displacement components of dynamic displacement field in the crack tip of orthotropic material under the dynamic load and the steady state in crack propagation were derived. When the crack propagation speed approachs to zero, the dynamic stress component and dynamic displacement components derived in this study are identical to the those of static state. In addition, the relationships between dynamic stress intensity factor and dynamic energy release rate are determinded by using the concept of crack closure closure energy with the dynamic stresses and represented according to physical properties of the orthotrophic material and crack speeds. The faster the crack velocity, the greater the stress value of stress components in crack tip. The stress value of the stress component of crack tip is greater when fiber direction coincides with the crack propagation than when fider direction is normal to the crack propagation.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.33 no.4
• /
• pp.52-60
• /
• 1991

This study was conducted to investigate the appropriate operation method minimizing the deviation between irrigation water demand and release from the reservoirs, and the simulation technique was used in the operation model. This model was applied to the grouped reservoirs system consisted of Dongsang, Daia and Keungchun reservoirs and Eowoo-weir in Chonbuk FLIA district. The results obtained in this study are summarized as follows; 1.The area above the Eowoo weir point was divided into 6 small watersheds, and daily inflows from each watershed were calculated by Tank model. It showed that the average annual runoff ratio was 40-60% respectively. 2.Based on the Blaney-Criddle formula daily water requirement of Chonbuk FLIA irrigation area was estimated, mean water requirement for paddy field during the irrigation period was 818.lmm. 3.Using the basic data such as inflow and water demand, four different release types were selected. Through the simulated operation the difference between intake water required at Eowoo-weir point and release from the 3 reservoirs was estimated. The best result was obtained when Daia and Keungchun reservoirs are operated parallelly at fixed release ratio and the release of Dongsang reservoir was determined according to the storage of Daia reservoir.

• Korean Journal of Medicinal Crop Science
• /
• v.11 no.3
• /
• pp.190-194
• /
• 2003

A field experiment was conducted to evaluate effect by split-application of slow-release fertilizer on the tea plant. The yield of the 2nd harvested tea leaves was not different to the slow-release fertilizer of two time split manuring had been doing Sep. or Mar. compared with the traditional manuring had been doing four time split manuring, but that of the slow-release fertilizer to one time split manuring in Sep. had decreased $12.5{\pm}1.5%$. In case of the 2nd harvested leave, the contents of chemical components related to quality such as total nitrogen, total amino acid were somewhat higher in the slow-release fertilizer (two time split manuring) than in the traditional manuring, but those of tannin, and caffeine were low, and those of chlorophyll, vitamin C, free sugar and theanine were not different to out of treatments. In scoring test, appearance and quality of green tea were more excellence in the two time split manuring compared with one time split manuring of slow-release fertilizer and with the traditional manuring (four time split manuring). Therefore, I thought that use of slow-release fertilizer be increased yield and quality of tea leaves, and improved efficiency nature of nitrogen, phosphate and potassium out of soil fertilizer components.