• 자동차안전학회지
• /
• 제4권1호
• /
• pp.5-11
• /
• 2012

This paper discusses the evaluation of the safety impact of the Adaptive Cruise Control (ACC) system in Korea. To evaluate the safety impact, this paper suggests an analysis method by using the test scenario and field operational test data. The test scenario is composed to represent the main component factor of the ACC system and ACC related accident situation such as rear-end collision, lane-change, and road-curvature, etc. Also, from the field operation test data, the system's potential to increase the safety can be measured ideally. Besides, field operational testdata was used to revise the expected safety impact value as Korean road conditions. By using the proposed evaluation method, enhanced safety impact of the ACC system can be estimated scientifically.

• 한국산학기술학회논문지
• /
• 제21권3호
• /
• pp.453-459
• /
• 2020

모든 개발 무기체계는 원활한 작전운용을 위해 임의의 시간에 정상상태로 운용될 수 있는 확률을 높이는 것이 중요하다. 종합군수지원(Integrated Logistics Support, ILS)에서는 이 확률을 운용 가용도라고 하며, 개발 과정에서 해당 수치를 정량화하여 제시한다. 무기체계의 성공적인 개발을 위해 운용 가용도를 향상시킬 수 있는 방안은 여러 가지가 있다. 그 중 하나의 방안은 자동화시험장비(ATE)를 통해 수행하는 고장정비시간을 줄이는 것이다. 최근 방산시장에서의 고객은 이러한 점을 인식하고 무기체계 운용 가용도 향상을 위한 방안을 요구하고 있다. 그러므로 이 논문에서는 자동화시험장비 운용방식을 변경하여 무기체계의 운용 가용도를 향상시킬 수 있는 방안을 제시한다. 그 구체적인 방안은 야전정비요원이 야전정비지원을 부대에서 수행할 수 있도록 하는 것이다. 이는 대상품 시험을 위한 야전정비요원의 이동시간을 줄임으로써 무기체계 총 고장정비시간(Total Corrective Maintenance Time, TCM)을 감소시킬 수 있는 효과적인 방안이다. 제안된 자동화시험장비는 기존 대비 뛰어난 정비도 및 운용 가용도를 달성할 수 있음을 입증하였다.

• 한국자동차공학회논문집
• /
• 제21권1호
• /
• pp.1-8
• /
• 2013

Recently, the automotive technology has developed with electronics and information technology as convergence technology while vehicles had been regarded as machines. Moreover, vehicles are becoming more intelligent and safer devices, assembly of advanced technologies by customers' demand. Even though all of installations of vehicle have attracted as diverting devices, it cause drivers' mistakes like delay of response on traffic condition. Here, we proposed the Field Operational Test (FOT) environment which could be used as driving and road conditions collector(Vehicle motion, Traffic condition, Driver input, Driver state, etc.) for researches about Driver Friendly Intelligent System(SCC, LDWS, etc.), Human Vehicle Interface(Driving Workload, etc.) and Economic Drive Model. Furthermore driving patten and fuel consumption patten of drivers were analyzed by measured data and direction of future research was suggested.

• 한국태양에너지학회 논문집
• /
• 제40권5호
• /
• pp.1-12
• /
• 2020

To assess the performance and characteristics of colored building-integrated photovoltaic (BIPV) modules, a comparative assessment of empirical performance was conducted on colored BIPV modules (gray, blue, and orange) and general BIPV module. These modules were installed on the south-facing slope (30°) for comparative assessment through a field test. Monitoring data were collected every 10 min from December 20, 2019 to January 21, 2020 and used to performance and characteristics analysis. Performance ratio and module efficiency were utilized during performance indexing for comparative assessment. For general BIPV modules, the operational efficiency was analyzed at 16.63%, whereas for colored BIPV modules, 13.70% (gray), 15.12 % (blue), and 14.49% (orange) were analyzed. It was discovered that the efficiency reduction caused by transmission losses owing to the application of colored cover glasses were 17.74% (gray), 9.05% (blue), and 9.86 % (orange), under field testing conditions. These values turned on an additional 7% reduction in efficiency for gray BIPV modules, compared to the degradation resulting from transmission drop (gray: 10.87%, blue: 8.99%, and orange: 9.02%) calculated using the efficiency of each module in standard test conditions (STC). Performance ratio analysis resulted in the following values: 0.92 for general BIPV modules, and 0.85 (gray), 0.91 (blue), and 0.91 (orange) for colored BIPV modules. As demonstrated by the above results, modules with a colored cover glass may differ in their operational performance depending on their color, unlike general modules. Therefore, in addition to the performance evaluation under STC, additional factors of degradation require consideration through field test.

• 한국군사과학기술학회지
• /
• 제9권2호
• /
• pp.34-41
• /
• 2006

This paper describes the general considerations and operational applications of aircraft night vision goggle(NVG). The operators should recognize the NVG characteristics, natural night light sources and interoperability between them. And they have to keep attention to the method to take steps to avoid misperceptions, illusions during flight, and the negative impact on the effectiveness and safety of the mission. The considerations based on the interoperability between NVG and night operation suggest the evaluation items of NVG field test and flight test.

• Smart Structures and Systems
• /
• 제24권5호
• /
• pp.597-606
• /
• 2019

Damage detection based on dynamic characteristics of a structure is one of important roles in structural damage identification. It is difficult to detect local structural damage using traditional dynamic experimental methods due to a limited number of sensors used in an experiment. In this work, a non-contact test stand of fan blades is established, and a full-field noncontact test method, combined with three-dimensional digital image correlation, Bayesian operational modal analysis, and damage indices, is used to detect local damage of a fan blade under ambient excitation without use of baseline information before structural damage. The methodology is applied to detect invisible local damage on the fan blade. Such a method has a seemingly high potential as an alternative to detect local damage of blades with complex high-precision surfaces under extreme working conditions because it is a noncontact test method and can be used under ambient excitation without human participation.

• 한국초등과학교육학회지:초등과학교육
• /
• 제19권1호
• /
• pp.41-56
• /
• 2000

The purpose of this study was to investigate the change of elementary school students' conception on the movement of the moon, after teaching a lesson about the lunar phase which focused on concrete activities. The 396 subjects in this study consisted of intact groups of second, third, fourth, fifth, and sixth grade students. Pre-test and post-test instrument concerning on the conception in the movement of the moon were developed after reviewing the related literature and curriculum. Prevailing conceptions were identified by frequency of each conception. Then, the pattern of change and consistency of each conception were analyzed in comparison pre-test with post-test. To figure out the effect of teaching, the GEFT and the GALT instrument were administered to analyze it by gender, cognition mode and level. SPSS/WIN programs were used to process the data. The result showed that teaching 'movement of the moon' was the most effective in fourth grade. The effect of teaching 'changes in shape of the moon' was effective regardless of their sexes. Teaching 'changes in shapes of the moon' was more effective for the students whose cognitive modes were field-independent, than those filed-dependent. But the improvement by the teaching was not significantly different. The pre-score by cognitive level was significantly high in the order of the formal operational, transitional stage and the concrete operational stage. But the improvement of conception after teaching was high in the order of the concrete operational, transitional stage and the formal operational stage. That is to say, teaching was more effective as the cognitive level lowered.

• Journal of Radiation Protection and Research
• /
• 제34권4호
• /
• pp.165-169
• /
• 2009

Two dosimeters are provided to radiation workers participating in tasks where high radiation exposure is expected during maintenance at nuclear power plants. At Korean nuclear power plants, two dosimeters are currently provided for tasks where exposure rates exceed 1 mSv/hr, the difference of equivalent dose to specific parts of the body is more than 30% and an exposure of more than 2 mSv is expected in a single task. These conditions for the provisioning of two dosimeters are based on previous field test results, and it is recommended that the dosimeters be worn on the chest and back. It was also found that the workers felt it was more convenient when they wore two dosimeters on chest and back rather than on chest and head. After the application of previous field test results to practice, it was found that the calculated effective dose for workers during radiation work was lower than the maximum dose of chest or back dosimeter by approximately 10%-30%. This performance is regarded not only to meet the international guideline but also to provide convenience for workers during radiation work.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1995년도 추계학술대회 논문집 학회본부
• /
• pp.113-116
• /
• 1995

In this study, we formulate production costing problem with environmental and operational constraints into an optimization problem of LP form. In the process of formulation, auxiliary constraints on which reflect unit loading order are constructed to reduce the size of optimization problem by economic operation rules. As a solution of the optimization problem in LP form, we use Karmarkar's method which performs much faster than simplex method in solving large scale LP problem. The proposed production costing algorithm is applied to IEEE Reliability Test System, and performs production simulation under environmental and operational constraints. Test and computer results are given to show the accuracy and usefulness of the proposed algorithm in the field of power system planning.

• 대한교통학회지
• /
• 제13권1호
• /
• pp.5-33
• /
• 1995

This paper addresses the outlines of the traffic signal timing principles engaged in TRACS and the results of field test. Research team, encompassing research institute, university, and electronic company, conducted the three-year project for developing the new system, named TRACS(Traffic Adaptive Control System). The project was successfully completed in 1994. TRACS aims at accomplishing the objectives of better traffic adaptability and more reliable travel time prediction. TRACS operates in real-time adjusting signal timings throughout the system in response to variations in traffic demand and system capacity. The purpose of TRACS is to control traffic on an area basis rather than on an isolated intersection basis. An other purpose of TRACS is to provide real-time road traffic information such as volume, speed, delay , travel time, and so on. The performance of the first version of TRACS was compared to the conventional TOD control through field test. The test result was promi ing in that TRACS consistantly outperformed the conventional control method. The change of signaltiming reacted timely to the variation of traffic demand. Extensive operational test of TRACS will be conducted this year, and some functions will be enhanced.