• Journal of Korea Water Resources Association
• /
• v.53 no.10
• /
• pp.845-859
• /
• 2020

Climate change and recent heat waves have drawn public attention toward other environmental issues, such as water pollution in the form of algal blooms, chemical leaks, and oil spills. Water pollution by the leakage of chemicals may severely affect human health as well as contaminate the air, water, and soil and cause discoloration or death of crops that come in contact with these chemicals. Chemicals that may spill into water streams are often colorless and water-soluble, which makes it difficult to determine whether the water is polluted using the naked eye. When a chemical spill occurs, it is usually detected through a simple contact detection device by installing sensors at locations where leakage is likely to occur. The drawback with the approach using contact detection sensors is that it relies heavily on the skill of field workers. Moreover, these sensors are installed at a limited number of locations, so spill detection is not possible in areas where they are not installed. Recently hyperspectral images have been used to identify land cover and vegetation and to determine water quality by analyzing the inherent spectral characteristics of these materials. While hyperspectral sensors can potentially be used to detect chemical substances, there is currently a lack of research on the detection of chemicals in water streams using hyperspectral sensors. Therefore, this study utilized remote sensing techniques and the latest sensor technology to overcome the limitations of contact detection technology in detecting the leakage of hazardous chemical into aquatic systems. In this study, we aimed to determine whether 18 types of hazardous chemicals could be individually classified using hyperspectral image. To this end, we obtained hyperspectral images of each chemical to establish a spectral library. We expect that future studies will expand the spectral library database for hazardous chemicals and that verification of its application in water streams will be conducted so that it can be applied to real-time monitoring to facilitate rapid detection and response when a chemical spill has occurred.

• Korean Journal of Soil Science and Fertilizer
• /
• v.34 no.5
• /
• pp.316-325
• /
• 2001

To develope a technique for efficiently managing fertilizer for cucumber, a quick test method to quantify nitrate content in soil solution and leaf petiole juice using a simple instrument was investigated. Among the nitrate analyzing instruments such as compact ion meter, nitrate ion meter, and test strip with reflectometer, the paper test-strip used in conjunction with a hand-held reflectometer was most closely correlated with ion chromatography method in nitrate content, and then it would be suggested with a tool that a farmer can use rapidly, conveniently and accurately for nitrate analysis in a field. Nitrate content in soil solution collected by porous cup was very variable on the lapsed time after drip irrigation and the sampling positions such as soil depth and the distance from dripper. As a result, a significant correlation between nitrate contents of soil solutions and 2M KCl soil extract was not found. However, nitrate content in soil solution extracted with a volume basis (soil:water=1:2) showed the highly significant correlation with that in 2M KCl extract. Nitrate contents of cucumber leaf petiole juices was greatly different between upper and lower leaves. Eleven to sixteen positioned-leaf would be a proper sampling position to determine nitrate content in leaf petiole for evaluating nutrient state by plant tissue analysis. From the secondary regression equations between nitrate contents of soil and petiole juice and the yield of cucumber, nitrate levels for real time diagnosis were estimated as $400mg\;l^{-1}$ soil solution by porous cup. $300mg\;l^{-1}$ in a soil volume extraction, and $1400mg\;l^{-1}$ in petiole juice from spring to summer season. In addition, the maximum yield of cucumber fruit in pot test was obtained in nitrate $1500mg\;l^{-1}$ level of petiole juice, which was similar to nitrate $1400mg\;l^{-1}$ in greenhouse trial.

• Proceedings of the Korean Geotechical Society Conference
• /
• 1998.05a
• /
• pp.35-81
• /
• 1998

Distinct Element Method(DEM) has a great advantage to model the discontinuous behaviour of jointed rock masses such as rotation, sliding, and separation of rock blocks. Geometrical data of joints by a field monitoring is not enough to model the jointed rock mass though the results of DE analysis for the jointed rock mass is most sensitive to the distributional properties of joints. Also, it is important to use a properly joint law in evaluating the stability of a jointed rock mass because the joint is considered as the contact between blocks in DEM. In this study, a stochastic modelling technique is developed and the dilatant rock joint is numerically modelled in order to consider th geometrical and mechanical properties of joints in DE analysis. The stochastic modelling technique provides a assemblage of rock blocks by reproducing the joint distribution from insufficient joint data. Numerical Modelling of joint dilatancy in a edge-edge contact of DEM enable to consider not only mechanical properties but also various boundary conditions of joint. Preprocess Procedure for a stochastic DE model is composed of a statistical process of raw data of joints, a joint generation, and a block boundary generation. This stochastic DE model is used to analyze the effect of deviations of geometrical joint parameters on .the behaviour of jointed rock masses. This modelling method may be one tool for the consistency of DE analysis because it keeps the objectivity of the numerical model. In the joint constitutive law with a dilatancy, the normal and shear behaviour of a joint are fully coupled due to dilatation. It is easy to quantify the input Parameters used in the joint law from laboratory tests. The boundary effect on the behaviour of a joint is verified from shear tests under CNL and CNS using the numerical model of a single joint. The numerical model developed is applied to jointed rock masses to evaluate the effect of joint dilation on tunnel stability.

• Korean Security Journal
• /
• no.53
• /
• pp.63-79
• /
• 2017

Defence Security Command is the only military intelligence and investigation agency which is in charge of safeguarding military information and investigating specific crimes such as subversion and disloyalty in military. While the presidential security provided by Defence Security Command, along with Presidential Security Service(PSS) and the police, forms one of three pillars sustaining presidential security, its works and activities have been rarely known to the public due to the military confidentiality. This study looks into some data specialized into the presidential security among works of Defense Security Command by using various resources such as biographies of key people, media reports, and public materials. It reviews the presidential security works in a historical sense that the works have developed and changed in accordance with the historical changes of Defense Security Command, which was rooted in Counter-Intelligence Corps (Teukmubudae in Korean) in 1948 and leads to the present. The study findings are as follows. First, when the Korean War broke out in 1950 and since then the South Korea was under the threat of the North Korean armed forces and left wing forces, Counter-Intelligence Corps(Bangcheopdudae in Korean) took the lead in presidential security more than the police who was in charge of it. Secondly, even after the Presidential Security Office has founded in 1963, the role of the military on presidential security has been extended by changing its titles from Counter-Intelligence Corps to Army Security corps to Armed Forces Security Command. It has developed their provision of presidential security based on the experience at the president Rhee regime when they could successfully guard the president Rhee and the important government members. Third, since the re-establishment into Defence Security Command in 1990, it has added more security services and strengthened its legal basis. With the excellent expertise, it played a pivotal role in the G20 and other state-level events. After the establishment of the Moon Jaeinin government, its function has been reduced or abolished by the National Defense Reform Act. However, the presidential security field has been strengthening by improving security capabilities through reinforcing the organization. This strengthening of the security capacity is not only effective in coping with the current confrontation situation with the hostile North Korean regime, but also is important and necessary in conducting constant monitoring of the military movement and security-threat factors within military during the national security events.

• Geophysics and Geophysical Exploration
• /
• v.9 no.4
• /
• pp.271-278
• /
• 2006

Investigations of underground cavities are required to provide useful information for the reinforcement design and monitoring of the ground subsidence areas. It is, therefore, necessary to develop integrated geophysical techniques incorporating different geophysical methods in order to accurately image and to map underground cavities in the ground subsidence areas. In this study, we conducted geophysical investigations for development of integrated geophysical techniques to detect underground cavities at the field test site in the ground subsidence area, located at Yongweol-ri, Muan-eup, Muan-gun, Jeollanam-do. We examined the applicability of geophysical methods such as electrical resistivity, electromagnetic, and microgravity to cavity detection with the aid of borehole survey results. The underground cavities are widely present within the limestone bedrock overlain by the alluvial deposits in the test site where the ground subsidences have occurred in the past. The limestone cavities are mostly filled with groundwater or clays saturated with water in the site. The cavities, thus, have low electrical resistivity and density compared to the surrounding host bedrock. The results of the study have shown that the zones of low resistivity and density correspond to the zones of the cavities identified in the boreholes at the site, and that the geophysical methods used are very effective to detect the underground cavities. Furthermore, we could map the distribution of cavities more precisely with the study results incorporated from the various geophysical methods. It is also important to notice that the microgravity method, which has rarely used in Korea, is a very promising tool to detect underground cavities.

• Progress in Medical Physics
• /
• v.17 no.1
• /
• pp.24-31
• /
• 2006

Automated analysis software was developed to measure the magnitude of the intrafractional and interfractional errors during breast radiation treatments. Error analysis results are important for determining suitable planning target volumes (PTV) prior to Implementing breast-conserving 3-D conformal radiation treatment (CRT). The electrical portal imaging device (EPID) used for this study was a Portal Vision LC250 liquid-filled ionization detector (fast frame-averaging mode, 1.4 frames per second, 256X256 pixels). Twelve patients were imaged for a minimum of 7 treatment days. During each treatment day, an average of 8 to 9 images per field were acquired (dose rate of 400 MU/minute). We developed automated image analysis software to quantitatively analyze 2,931 images (encompassing 720 measurements). Standard deviations ($\sigma$) of intrafractional (breathing motion) and intefractional (setup uncertainty) errors were calculated. The PTV margin to include the clinical target volume (CTV) with 95% confidence level was calculated as $2\;(1.96\;{\sigma})$. To compensate for intra-fractional error (mainly due to breathing motion) the required PTV margin ranged from 2 mm to 4 mm. However, PTV margins compensating for intefractional error ranged from 7 mm to 31 mm. The total average error observed for 12 patients was 17 mm. The intefractional setup error ranged from 2 to 15 times larger than intrafractional errors associated with breathing motion. Prior to 3-D conformal radiation treatment or IMRT breast treatment, the magnitude of setup errors must be measured and properly incorporated into the PTV. To reduce large PTVs for breast IMRT or 3-D CRT, an image-guided system would be extremely valuable, if not required. EPID systems should incorporate automated analysis software as described in this report to process and take advantage of the large numbers of EPID images available for error analysis which will help Individual clinics arrive at an appropriate PTV for their practice. Such systems can also provide valuable patient monitoring information with minimal effort.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.16 no.1
• /
• pp.81-91
• /
• 2010

IMO(International Maritime Organization) and the Shipping World rave complied with various kinds of international regulations for maritime safety and marine environmental protection, but the main reason of maritime accidents is that developing countries cannot implement maritime safety related regulations. Although Korea has been a member of the "A group" council of IMO, maritime technology transfer records of Korea are not good. To promote the project of official development assistance in Korea, it is required to select the technology which has a high degree of importance in the fields of maritime safety and has a high degree of demand on the transfer to developing countries, and to concentrate on the selected technology. So, it is necessary to draw valuation factors for maritime safety technology and to decide the priority in order among maritime safety technologies on the basis of valuation factors. Because the weights which show the degree of importance among valuation factors are different from factor to factor, interdependent relationship between factors should be considered on evaluation. In this study, the valuation factors were divided into three groups as the maturity of maritime safety technology, the promotion probability of projects and the degree of importance of technology, and the detailed factors of each group were drawn. A model which used Fuzzy AHP and limiting probability to consider the weights of importance and correlation among valuation factors was developed. To adopt this model, nine types of maritime safety technology in the field of maritime safety information were selected and points were scored for each technology through evaluation. In conclusion, first, ENC related technology was scored to be the highest as 0.0139. Second, the point of ship monitoring technology was scored as 0.0133. Last, oil spill response technology was scored as 0.0132.

• Korean Journal of Heritage: History & Science
• /
• v.43 no.1
• /
• pp.190-211
• /
• 2010

The purpose of this paper is to provide the preliminary data for maintenance of old trees of natural monuments and establishing protection projects. Accordingly, growth conditions, location circumstances, environment and protection management were analyzed for old trees at 34 sites in Gyeongsangbuk-do. Tree forms, crown, trunk and trees' health, leaves volume were analyzed in survey sites. As the results, the growth of Picrasma quassioides in Songsadong, Andong-si and Catalpa ovata in Hongwon-ri, Cheongsong-gun were not in good condition, along with other old trees of 6 cities (Quercus variabilis in Susan-ri, Uljin-gun, Juniperus chinensis in Hujeong-ri, Uljin-gun, Pyrus ussuriensis in Ssangjeon-ri, Uljin-gun, Salix glandulosa var. pilosa in Deokchon-ri, Cheongdo-gun, Pinus densiflora for. multicaulis in Hwasan-ri, Mungyeong-si, Pinus densiflora in Daeha-ri, Mungyeong-si). Accoding to these results, protection project and consistent monitoring are necessary. The analysis results of growth conditions per location circumstances showed that the old trees in the small spaces with large traffic of people were in bad condition. Therefore, it is necessary to secure sufficient space and soil improvement for such trees. The analysis results of growth conditions per species showed that Zelkova serrata, Quercus spp., Pinus densiflora are in good condition while Salix koreensis and others, i.e. a singular tree, are in poor condition. Thus, relatively smaller individuals and separately situated trees need careful management in their protection. The analysis results of trunk's growth ratio showed that Pinus densiflora, Ginkgo biloba, Zelkova serrata are in good condition whereas Juniperus chinensis, Quercus variabilis, Salix koreensis are not. It is a recent trend that tree surgeries are gradually decreasing; there are a number of damaged trees with no maintenance/management, and several sites requiring mend trunks management and cabling, bracing in protection and management projects. Hence, in the future, local government and management organizations should plan for systematic management and establish a protection plan for the natural monument trees. Also, 12 sites were found to be in need to purchase lands in order to secure the growth spaces, and since most of these areas are available for purchase, it is needed to promote a budget and purchase those areas through persuasion of the owner. These areas seems crucial in order to maximize the effect of conservation efforts and budgets for the preservation and restoration of the old trees.

• Korean Journal of Heritage: History & Science
• /
• v.50 no.2
• /
• pp.94-115
• /
• 2017

'Arirang folk song in the Democratic People's Republic of Korea' was inscribed to the Representative List of the Intangible Cultural Heritage of Humanity in 2014 and 'Tradition of kimchi-making in the Democratic People's Republic of Korea' followed in 2015. It is presumed that North Korea was influenced by the Republic of Korea inscribing 'Arirang, lyrical folk song in the Republic of Korea' to the list in 2012 as well as 'Kimjang, making and sharing kimchi in the Republic of Korea' in 2013. These cases show the necessity (or possibility) of cultural exchanges between the two Koreas through UNESCO ICH lists. The purpose of this article is to explore the possibility of inter-Korean cultural integration. Therefore, I would like to review UNESCO's ICH policy and examine the ways of cooperation and joint nominations to the Representative List of Intangible Cultural Heritage of Humanity between the two Koreas. First, I reviewed the amendments to the laws and regulations of the two Koreas and how the two countries applied the UNESCO Convention for the Safeguarding of the Intangible Cultural Heritage. Although the cultural exchange is a non-political field, given the situation between South and North Korea, it is influenced by politics. Therefore, we devised a stepwise development plan, divided into four phases: infrastructure development, cooperation and promotion, diversification, and policymaking and alternative development. First a target group will be needed. In this regard, joint nominations to the Representative List of the UNESCO Intangible Cultural Heritage of Humanity will be suitable for cooperation. Both countries have already started separate nominations on shared ICH elements to the UNESCO lists. Therefore, I have selected a few elements as examples that can be considered for joint nominations. The selected items are makgeolli (traditional liquor), jang (traditional soybean sauce), gayangju (homebrewed liquor), gudeul (Korean floor heating system), and jasu (traditional embroidery). Cooperation should start with sharing information on ICH elements. A pilot project for joint nomination can be implemented and then a mid-term plan can be established for future implementation. When shared ICH elements are inscribed on UNESCO ICH lists, various activities can be considered as follow-ups, such as institution visits, performances, exhibitions, and joint monitoring of the intangible cultural heritage. Mutual cooperation of the two Koreas' intangible cultural heritage will be a unique example between the divided countries, so its value will be recognized as a symbol of cultural cooperation. In addition, it will be a foundation for cultural integration of the two Koreas, and it will show the value of their unique ICH to the world. At the same time, it will become a good example for joint nominations to the Representative List recommended by UNESCO.

• Journal of Intelligence and Information Systems
• /
• v.25 no.1
• /
• pp.127-137
• /
• 2019

Recidivism prediction has been a subject of constant research by experts since the early 1970s. But it has become more important as committed crimes by recidivist steadily increase. Especially, in the 1990s, after the US and Canada adopted the 'Recidivism Risk Assessment Report' as a decisive criterion during trial and parole screening, research on recidivism prediction became more active. And in the same period, empirical studies on 'Recidivism Factors' were started even at Korea. Even though most recidivism prediction studies have so far focused on factors of recidivism or the accuracy of recidivism prediction, it is important to minimize the prediction misclassification cost, because recidivism prediction has an asymmetric error cost structure. In general, the cost of misrecognizing people who do not cause recidivism to cause recidivism is lower than the cost of incorrectly classifying people who would cause recidivism. Because the former increases only the additional monitoring costs, while the latter increases the amount of social, and economic costs. Therefore, in this paper, we propose an XGBoost(eXtream Gradient Boosting; XGB) based recidivism prediction model considering asymmetric error cost. In the first step of the model, XGB, being recognized as high performance ensemble method in the field of data mining, was applied. And the results of XGB were compared with various prediction models such as LOGIT(logistic regression analysis), DT(decision trees), ANN(artificial neural networks), and SVM(support vector machines). In the next step, the threshold is optimized to minimize the total misclassification cost, which is the weighted average of FNE(False Negative Error) and FPE(False Positive Error). To verify the usefulness of the model, the model was applied to a real recidivism prediction dataset. As a result, it was confirmed that the XGB model not only showed better prediction accuracy than other prediction models but also reduced the cost of misclassification most effectively.