• Progress in Medical Physics
• /
• v.23 no.4
• /
• pp.317-325
• /
• 2012

The Varian PORTALVISION (Varian Medical Systems, US) shows significant overresponses as the off-center distance increases compared to the predicted dose. In order to correct the dose discrepancy, the off-axis correction is applied to VARIAN iX linear accelerators. The portal dose for $38{\times}28cm^2$ open field is acquired for 6 MV, 15 MV photon beams and also are predicted by PDIP algorithm under the same condition of the portal dose acquisition. The off-axis correction is applied by modifying the $40{\times}40cm^2$ diagonal beam profile data which is used for the beam profile calibration. The ratios between predicted dose and measured dose is modeled as a function of off-axis distance with the $4^{th}$ polynomial and is applied to the $40{\times}40cm^2$ diagonal beam profile data as the weight to correct measured dose by EPID detector. The discrepancy between measured dose and predicted dose is reduced from $4.17{\pm}2.76$ CU to $0.18{\pm}0.8$ CU for 6 MV photon beam and from $3.23{\pm}2.59$ CU to $0.04{\pm}0.85$ CU for 15 MV photon beam. The passing rate of gamma analysis for the pyramid fluence patten with the 4%, 4 mm criteria is improved from 98.7% to 99.1% for 6 MV photon beam, from 99.8% to 99.9% for 15 MV photon beam. IMRT QA is also performed for randomly selected Head and Neck and Prostate IMRT plans after applying the off-axis correction. The gamma passing rare is improved by 3% on average, for Head and Neck cases: $94.7{\pm}3.2%$ to $98.2{\pm}1.4%$, for Prostate cases: $95.5{\pm}2.6%$, $98.4{\pm}1.8%$. The gamma analysis criteria is 3%, 3 mm with 10% threshold. It is considered that the off-axis correction might be an effective and easily adaptable means for correcting the discrepancy between measured dose and predicted dose for IMRT QA using EPID in clinic.

• Progress in Medical Physics
• /
• v.6 no.2
• /
• pp.13-19
• /
• 1995

The behavior of the correction factor associated with the collimator opening(head-scatter factor) were investigated for the 6MV x-ray beams of medical linear accelerator. The primary photon fluence was measured in air quasi-small fied size. Consideration in this study was given to the effect of head scatter factor with quasi-small fied size, the upper and lower collimator jaw scatter collection factors of quasi-small field (4-10cm) were measured with ion chamber. In general, the wedge factors which are used clinical practics are ignored of dependency on field sizes and depth. In wedge factors for each wedge filter were measured at various depth by using 6MV X-ray. In this present we inverstigated systematically the depth and field sizes dependency to determine the absorbed dose more accurately. Head scatter(upper-lower collimator jaw)appears to be (1) a small effect, less than 5％ over the range of clinical field sizes (2) generated primarily at the flattening filter and therefored influenced most by the upper collimator setting.

• The Journal of the Korea Contents Association
• /
• v.12 no.12
• /
• pp.395-412
• /
• 2012

RAM analysis using field data is important and useful for acquisition and operation of weapon systems. But this kind of analysis didn't conducted due to the absence of weapon system's failure data in case of warship. This study suggest failure tracking process based on maintenance and repair parts consumption data and proves suggested method enables conducting RAM analysis. This method obtains validity through field operator's reviews. The results on 9 warships in this study significantly correspond with weapon system operator's experiences. Because the result of this study contains effects of various operational environments in field, it will useful for correction and verification on existing another weapon system's RAM estimates. If this kind of RAM data are sufficiently accumulated, it will be used to DB of korean unique RAM analysis.

• Korean Journal of Environmental Agriculture
• /
• v.37 no.1
• /
• pp.41-48
• /
• 2018

BACKGROUND: This study was performed to calculate the biological half-lives and regression coefficient of bistrifluron and cyenopyrafen dissipation in peach and to estimate the Pre-Harvest Residue Limits (PHRLs). METHODS AND RESULTS: The bistrifluron and cyenopyrafen were prepared on the basis of good agricultural practice for peach and treated with a single application. Peaches were harvested at 0, 1, 3, 5, 7, 10 and 14 days after application, prepared for analysis, and analyzed by HPLC-DAD. The limits of quantitation (LOQ) of bistifluron and cyenopyrafen were 0.02 mg/kg and 0.04 mg/kg, respectively. The recoveries of bistrifluron and cyenopyrafen were 99.5~108.7% and 88.4~98.9% at two different concentration levels. The biological half-lives of field I (Sejong) and field II (Pyeongtaek) were 6.1 and 7.0 days for bistifluron, and 6.3 and 7.0 days for cyenopyrafen, respectively. The 95% confidence intervals of dissipation rate constants of bistrifluron in peach were 0.0805~0.1457 and 0.0577~0.1417 for field I and field II, respectively, and those of cyenopyrafen were 0.0911~0.1278 and 0.0576~0.1417, respectively. CONCLUSION: Residue dissipation of bistrifluron and cyenopyrafen in peach were similar to that of correction to sample weight difference during the harvest periods. This study suggests that residue dissipation rate would be helpful to set the PHRLs that protect public health.

• Journal of Fashion Business
• /
• v.17 no.1
• /
• pp.131-144
• /
• 2013

The purpose of this study was to analyse the structure and contents of clothing construction field in the middle-school textbook of technology and home economics with curriculum revised in 2007. 10 kinds of textbooks certified by Ministry of Education, Science and Technology in 2010 were selected and home economics field in them was the subject of this study with the external characteristics such as textbook system, instruction area and contents included. This study was content analysis-oriented and descriptive with data calculated by frequency and percentage. The findings are as follows. In 'Reality of Home-Life', food life area showed highest as 34.4% followed by clothing life(28.7%) and dwelling life(28.7%). The portion of present teachers in writing staffs was highest while there was no textbook where professors of each field were included in writing staffs. The contents of costume society, clothes material, clothes management from section 'Choice and Management of Clothes' in the chapter 'Family Life' and clothing construction from the section 'Making and Modifying Clothes' of the chapter 'Reality of Home-Life' were analysed in this study. Clothing construction-related fields were suggested separately by method of measurement, construction theory, drafting theory, drafting an original form, fabric trimming, utilization of the original form, length measure, cloth cutting, hand stitching, how to use a sewing machine, basting and correction, needlework process, completion, and evaluation. The contents of the unit 'Making Shorts' were about clothing construction theory, human body measurement, drafting an original form, process of making shorts and activity/research/experience. The contents of the unit 'Wearing Clothes after Fixing' in clothing construction-related field were about how to fix and recycling.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.14 no.1
• /
• pp.265-274
• /
• 2019

The paper describes an application of unscented Kalman filter(UKF) for attitude estimation of an unmanned vehicle(UV), which is equipped with a low-cost attitude heading reference system (AHRS). The roll, pitch and yaw required at the correction stage of the UKF are calculated from the measurements of acceleration and geomagnetic field. The roll and pitch are attributed to the measurement of acceleration, while yaw is calculated from the geomagnetic field measurement. Since the measurement of geomagnetic field is vulnerable to distortion by hard-iron and soft-iron effects, the calculated yaw has more uncertainty than the calculated roll and pitch. To reduce the uncertainty of geomagnetic field measurement, the proposed method estimates bias in the geomagnetic field measurement and compensates for the bias for more accurate calculation of yaw. The proposed method is verified through navigation experiments of a UV in a test pool. The results show that the proposed method yields more accurate attitude estimation; thus, it results more accurate location estimation.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.12 no.2
• /
• pp.177-192
• /
• 2010

The field measurements on the shotcrete lining are usually performed during the tunnel construction. However, the credibility of the measurements is not certain because of the non-stress related strains occurring in the shotcrete, the uncertainty of the deformation modulus of the shotcrete, and the intrinsic difficulties involved in the strain measurements in the shotcrete. The problem related to the field measurements on the shotcrete is investigated using the review of the previous studies and the field measurement performed for this study. A method for the correction of stress measurements at the shotcrete lining, considering the non-stress related strains, is suggested using the literature review and the actual measurements obtained from the non-stress shotcretes. The deformation modulus used for the calculation of the stress acting on the shotcrete is also suggested.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.30 no.1
• /
• pp.21-30
• /
• 2012

When two bands have different look angle in a space-borne camera system, the registration between two bands is required. The registration cannot be modeled with constant parameters because of dynamic of platform and parallax effect. The parallax effect is caused by terrain relief, hence it causes local distortion between two bands. Therefore, the terrain relief correction in order to reduce the parallax effect is required for better registration result, especially for high resolution image data. Such terrain relief correction also can be applied to image data acquired from multiple detectors with different look angle within a band, which is a one of commonly used configuration for a wider swath in space-borne camera system, in order to reduce the distortion between detectors. The RFM is a popular abstract model in remote sensing field, which gives us the relationship between the image plane and geodetic coordinate system. Therefore, we propose a terrain relief correction method based on the RFM. The experiment showed very promising result.

• Geophysics and Geophysical Exploration
• /
• v.20 no.3
• /
• pp.163-175
• /
• 2017

In land seismic exploration, irregular surface topography and weathering layer in near surface distorts the reflected signals of data. Therefore, typical land seismic data should be compensated for this distortion by static correction. To perform the static correction, near-surface velocity is required, which can be obtained by seismic refraction survey. However, land seismic data is often acquired in a limited form of geometry depending on the equipment availability, accessibility condition, and permission for the survey site. In this situation, refraction analysis should be performed using reflection data because it is impossible to acquire refraction-oriented data due to limited source and receiver geometry. In this study, we aimed to analyze the reliability of the results obtained by refraction traveltime tomography when using reflection data with a limited number of sources and receivers from irregular surface topography. By comparing the inversion result from irregular topography with that from flat surface, we found that the surface topography affects the reliability of the inversion results to some degree. We also found that the number of sources has little effect on the inversion results unless the number of sources are very small. On the other hand, we observed that velocity distortion occurred in the overlapped part of receiver arrays when using a limited number of receivers, and therefore suggested the size of the least overlapping ratio to avoid the velocity distortion. Finally, we performed numerical tests for the model which simulates the surface topography and acquisition geometry of the survey region and verified the reliability analysis of inversion results. We identified reliable areas and suspicious area of the inverted velocity model by applying the analysis results to field data.

• Journal of Korean Society for Geospatial Information Science
• /
• v.11 no.3 s.26
• /
• pp.23-34
• /
• 2003

Currently, the efficiency of GPS has been increased in the various precise survey like as the control survey and the navigation etc. Also, it is widely used in the deformation analysis of the structure, the measurement of the marine tides, the measurement of the river level and the topographic monitoring of seabed or riverbed by combined the measurement equipment for depth. In this study, we intend to increase in efficiency of the topographic monitoring of seabed or riverbed by combined with DGPS, RTK GPS and echo sounder. For this study, we defined the error correction of the echo sounder with the experiment of water tank which is considered the characteristic of estuary riverbed and then we developed the s/w for 3-dimensional monitoring of estuary riverbed and applied the s/w to field test and improved the various problems. On analyzing topography of estuary riverbed by combined GPS with echo sounder, the draught error which is yielded to change of length from the water surface by the movement of survey vessel to the end of the transducer was eliminated by geometrical rearrangement and we defined the correction formula $z=BM+SAH-DBR_{(i)}-DRT-ED$. The sounding error about the echo sounder and characteristic of estuary riverbed was found by understanding the relation of average diameter ind residual error and we defined correction formula, $Y=0.00474{\ast}ln(X)-0.0045$ by the regression analysis. and then we verified applicability of correction formula.