• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2009년도 춘계학술대회 논문집
• /
• pp.141-147
• /
• 2009

This paper reports on a study to increase the flexibility of previous TMDS(Train Monitoring and Diagnosis System) network communication in case of both multiple units and variable train sets. The previous TMDS network configuration has been applied using various field-BUS by the TMDS manufacturers using their own intrinsic method. But recently, there has been a demand for flexible train formations such as multiple units and variable train set formations, hence the TMDS had to be adapted to offer flexible network communication technology capability. Therefore, Hyundai-Rotem needed its intrinsic method of network configuration, and develop a network configuration method applicable to both multiple units and variable train set formations. The TMDS was integrated into the Irish Rail new Diesel Multiple Units from an early stage of the project and subsequently fully tested on a finished train.

• 대한기계학회논문집B
• /
• 제31권2호
• /
• pp.181-187
• /
• 2007

Conventional PIV method uses two optical axis configuration during the image grabbing process. That is, the illumination plane and the recording plane must be parallel. This configuration is very natural to grab the whole field without the image distortion. In the real problem, it is often to meet the situation when this configuration is hard to be fulfilled. In the present study, the new PIV method which uses only single optical axis to grab the particle images is developed. This new PIV method becomes possible by utilizing the scanning method similar to the echo PIV technique. One particle image of the scanning PIV consists of scanned several line images and by repeating this scanning process, two particle images were grabbed and processed to produce the velocity vectors. An optimization study was performed to find parameters which minimize the measurement errors. The effects of particle diameter, beam overlap ratio and particle number density were investigated.

• 대한산업공학회지
• /
• 제33권3호
• /
• pp.355-363
• /
• 2007

This paper presents a method of an automatic work time evaluation based on the verification of a disassemblability and assembly configuration. Even though a work time evaluation is an important field of concern for planning assembly lay-out, there are some limitations using cumbersome user query or approximated work time data without considering assembly condition. To overcome such restriction, this paper presents a method to mathematically verify assembly conditions based on the disassemblability, which is defined by the separability and stability cost. The separability cost represents a facility of the part disassembly operation, and the stability cost which represents a degree of the stability for the base assembly motion. Based upon the results, we propose a new approach of evaluating work time using neural networks. The proposed method provides an effective means of solving the work time evaluation problem and gives a design guidance of planning assembly lay-out in flexible manufacturing application. Example study is given to illustrate the concepts and procedure of the proposed schemes.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1993년도 하계학술대회 논문집 B
• /
• pp.945-947
• /
• 1993

This paper presents the numerical algorithm that can obtain the surface configuration of the magnetic fluid seals. The magnetic field is computed by nonlinear finite element method considering the saturation of magnetic fluid and pole piece. The surface equilibrium condition in ferrohydrodynamics are used in algorithm. The influence of the surface configuration on the sealed pressure due to the magnetic, centrifugal and gravitational forces is analyzed and compared with other experimental results.

• 한국공간구조학회논문집
• /
• 제23권4호
• /
• pp.59-69
• /
• 2023

Recently, the occurrence frequency of earthquake has increased in Korea, and the interests for seismic reinforcement of existing school buildings have been raised. To this end, the seismic performance evaluations for school buildings that did not accomplish the seismic design are required. In particular, this study checks the eigenvalue analysis, pushover curves, maximum base shears, performance points and story drift ratios, and then analyzes the seismic performance characteristics according to bracing configuration of steel frame system reinforcement. Also, this study presents the practical field application methods through the comparison of analysis results for the seismic performance characteristics.

• Nuclear Engineering and Technology
• /
• 제56권9호
• /
• pp.3961-3968
• /
• 2024

The Korea Atomic Energy Research Institute (KAERI) is developing a novel Two-Region Arc Plasma Ion Source (TRAP) as a negative hydrogen (deuterium) ion source for a Neutral Beam Injection (NBI) system in a fusion tokamak. The TRAP ion source is based on a two-region configuration, comprising a high energy electron region that creates highly vibrationally excited molecules and a low electron temperature region that generates negative ions by attaching electrons to molecules. This configuration can be achieved by optimizing the filament position and magnetic cusp field. In order to optimize the TRAP configuration, the plasma parameters are investigated under various operating conditions, such as filament position, gas pressure, and arc power. Electron density and temperature are determined using Langmuir probe measurements. In this paper, the detailed experimental results are described and discussed.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제43회 하계 정기 학술대회 초록집
• /
• pp.274-274
• /
• 2012

We have researched on controlling an electron temperature and a plasma collision frequency to study the effect of collisions on helicon plasmas. So, we have designed and constructed an electron cyclotron resonance (ECR) heating system in the helicon device as an auxiliary heating source. Since then, we have tried to optimize experimental designs such as a magnetic field configuration for ECR heating and 2.45GHz microwave launching system for its power transfer to the plasma effectively, and have characterized plasma parameters using a Langmuir probe. For improving an efficiency of the ECR heating with R-wave in the helicon plasma, we would understand an effect of R-wave propagation with ECR heating in the helicon plasma, because the efficiency of ECR heating with R-wave depends on some factors such as electron temperature, electron density, and magnetic field gradient. Firstly, we calculate the effect of R-wave propagation into the ECR zone in the plasma with those factors. We modify the magnetic field configuration and this system for the effective ECR heating in the plasma. Finally, after optimizing this system, the plasma parameters such as electron temperature and electron density are characterized by a RF compensated Langmuir probe.

• 한국전자파학회지:전자파기술
• /
• 제4권2호
• /
• pp.4-10
• /
• 1993

이동통신에서, 전파경로는 이동국의 위치변동때문에 시간 및 공간에 따라 변한다. 전파경로 손실은 주 파수와 거리뿐만 아니라 안테나 높이, 지형구조와 인위적 환경에 따라 탄라지브로 이동 전파신호의 전파 경로손실을 예측하기는 매우 어렵다. 본 고에서는 대전 및 서울 지역에서 전계강도를 측정하여 단구간 중앙치,500m 거리별 평균치 및 표준 편차를 산출하여 분석하였다. 분석 결과, 경로손실 특성이 예측모텔과 유사하였으며, 특히 단구간 중앙치 는 기지국 안테나 높이, 지형구조와 인위적 환경에 의존하며, 표준편차는 2-1OdBuV사이에 있음을 알 수 있다.

• Journal of Astronomy and Space Sciences
• /
• 제34권2호
• /
• pp.83-97
• /
• 2017

We present extra-tidal features of spatial configuration of stars around three metal-poor globular clusters (NGC 6266, NGC 6273, NGC 6681) located in the Galactic bulge. The wide-field photometric data were obtained in BVI bands with the MOSAIC II camera at CTIO 4 m Blanco telescope. The derived color-magnitude diagrams (CMDs) contain stars in a total $71^{\prime}{\times}71^{\prime}$ area including a cluster and its surrounding field outside of the tidal radius of the cluster. Applying statistical filtering technique, we minimized the field star contaminations on the obtained cluster CMDs and extracted the cluster members. On the spatial stellar density maps around the target clusters, we found overdensity features beyond the tidal radii of the clusters. We also found that the radial density profiles of the clusters show departures from the best-fit King model for their outer regions which support the overdensity patterns.

• 전기의세계
• /
• 제24권1호
• /
• pp.75-85
• /
• 1975

In order to develop the commercial frequency (60Hz) plasma torch of small capacity for material cutting, welding and other industrial heating, the A.C plasma jet generator of non-transfered type is made domestically and the electrode configurations of plasma torch are composed of two kinds of electrodes W-C and W-Cu, combined by thermal emission and field emission electrode materials. In this paper, the characteristics of input power, thermal efficiency, electrode consumption, the flame and forms of arc voltage and arc current for A.C plasma torch are investigated in relation to such variables as arc current, argon flow and magnetic field intensity to obtain the basic design data necessary to A.C plasma jet generator. The result are as follows; (1)The input power, thermal efficiency and electrode consumption are influenced greatly by argon flow, magnetic field intensity and nozzle materials. (2)A.C arc voltage and current are non-symmetrial, involving D.C Component. Due to this current of D.C Component, transformer core is saturated and a large abnormal current flows into the primary winding coil. In order to prevent this abnormal current flow, a condenser must be connected in series to the main discharge circuit. (3)The stability and sharpness of jet flame are improved more in the torch of W-C electrode configuration than in the torch of W-Cu electrode configuration.