• Journal of the Korea Institute of Military Science and Technology
• /
• v.18 no.4
• /
• pp.415-422
• /
• 2015

The flow field structures of dual jet-in-cross-flow were examined experimentally for in-lined perforated damage holes configuration using particle image velocimetry. Ensemble averaged in-plane velocity and vorticity data in the jet were determined to study the mean jet structure. Jets are formed by pressure differences between upper and lower airfoil surface. The flow structure of vicinity of the thru holes consist of a vortical structure that wrap around the jets like a horseshoe and develop further downstream through a pair of stream-wise vortices. The shape, size and location of the horseshoe vortex were found to be dependent on the angle of attack. In spite of the existence of battle damage holes, the effect on the control force was insignificant when the damage size was not large enough.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2011.10a
• /
• pp.63-65
• /
• 2011

Current general-purpose electromagnetic field simulator has been widespread and is being used to antenna design, EMC design, measurement, and microwave device design, etc. This paper is to solve various electromagnetic problems of X-band region for the purpose multi-core-based PC utilizing network resources more efficiently, and then the electromagnetic field simulator based on TCP / IP-based network topology, configuration, and its framework design is proposed.

• Proceedings of the KIEE Conference
• /
• 1996.11a
• /
• pp.152-156
• /
• 1996

Identification of incipient faults and various events on the distribution feeders is very important to develop the prediction method of fault symptom. In this paper, the configuration of data acquisition system to get the real field data is introduced. And the Quantification of incipient faults is also discussed. Based on the acquired field data, how the time domain parameters of voltage and current signals are applied to this research is partly introduced.

• Journal of the Korean Society of Safety
• /
• v.24 no.1
• /
• pp.37-42
• /
• 2009

The present study is to estimate the effect of wave height affecting at the front face of breakwater systems, when a submarine trench is dredged in the distant offshore from outer breakwater. The wave diffraction field, which is important hydraulic factor in the ocean, is considered to be two dimensional(2D) plane and the configuration of the submarine trench on the sea bed designated by single horizontal long-rectangular system. The numerical simulation is performed by using Green function based on the boundary integral equation and meshed at moving boundary conditions. The results of present numerical simulations are illustrated by applying the normal incidence. It is shown that the ratios of wave height reduction at the front face of breakwater systems are approximately 20% by the effect of placing long trench on the sea bed. This study can effectively be utilized for safety assessment to various breakwater systems in the ocean field.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.34 no.6
• /
• pp.441-446
• /
• 2014

A 3D ultrasound image is desired in many medical examinations. However, the implementation of a 2D array, which is needed for a 3D image, is challenging with respect to fabrication, interconnection and cabling. A 2D sparse array, which needs fewer elements than a dense array, is a realistic way to achieve 3D images. Because the number of ways the elements can be placed in an array is extremely large, a method for optimizing the array configuration is needed. Previous research placed the target point far from the transducer array, making it impossible to optimize the array in the operating range. In our study, we focused on optimizing a 2D sparse array transducer for 3D imaging by using a simulated annealing method. We compared the far-field optimization method with the near-field optimization method by analyzing a point-spread function (PSF). The resolution of the optimized sparse array is comparable to that of the dense array.

• Bulletin of the Korean Chemical Society
• /
• v.10 no.1
• /
• pp.27-30
• /
• 1989

Lithium has been intercalated into $FeMoO_4Cl$, and deintercalated from $LixFeMoO_4Cl$ both electrochemically and chemically. The inserted $Li^+$ ions are stabilized in the distorted octahedral field in interlayer space of $FeMoO_4Cl$. The crystal symmetry is reduced from tetragonal to monoclinic due to the reduction of ferric to ferrous ions in $LixFeMoO_4Cl$ upon lithium intercalation. From the magnetic and structural data, it has been concluded that the high-spin electronic configuration of $Fe^{2+}(d_{xz}^2{d_{y2}^1}{d_1}{2d_z^12}{\cdot}_y2)$, corresponding to $^5E_g$, group term in $D_{4h}$ symmetry, can be stabilized by the elongation of $FeO_4Cl_{2-}$octahedra in a weak ligand field.

• Current Optics and Photonics
• /
• v.5 no.2
• /
• pp.180-185
• /
• 2021

A femtosecond-laser inscribed Yb:YAG surface channel waveguide (WG) laser with single-walled carbon nanotubes deposited on the top surface of the WG was passively Q-switched by evanescent field interaction. Q-switched operation of the 14-mm-long compact Yb:YAG WG laser was achieved near 1031 nm with two different pumping schemes (single- and double-pass pumping) with an output coupling transmission of 91%. The Q-switched pulse characteristics depending on the absorbed pump power were investigated for both pumping geometries and analyzed in detail based on theoretical modeling. The best performances (energy/pulse duration) for each configuration were 204.4 nJ/75 ns at a repetition rate of 1.87 MHz, and 201.1 nJ/81 ns at 1.75 MHz for single- and double-pass pumping, respectively.

• Journal of the Korean Mathematical Society
• /
• v.58 no.4
• /
• pp.873-894
• /
• 2021

In this paper, we consider the Gudnason model of 𝒩 = 2 supersymmetric field theory, where the gauge field dynamics is governed by two Chern-Simons terms. Recently, it was shown by Han et al. that for a prescribed configuration of vortex points, there exist at least two distinct solutions for the Gudnason model in a flat two-torus, where a sufficient condition was obtained for the existence. Furthermore, one of these solutions has the asymptotic behavior of topological type. In this paper, we prove that such doubly periodic topological solutions are uniquely determined by the location of their vortex points in a weak-coupling regime.

• Progress in Superconductivity and Cryogenics
• /
• v.24 no.4
• /
• pp.78-83
• /
• 2022

REBCO coated conductors are widely used for HTS power application, high magnetic field magnet application, and etc. A thermal stability of the REBCO conductor is essential for the operation of HTS-based device, and thermal conductivities of the conductor are relevant parameters for modeling cryogenic heat transfer. REBCO conductors consist of a REBCO layer, copper layers for electrical stabilization and a hastelloy substrate. At cryogenic temperature, thermal conductivity of copper and silver strongly depend on the purity of the material and the intensity of the magnetic field. In this study, thermal conductivities of the laminated composite structure of REBCO conductor are evaluated by using the thermal network model and the multidimensional heat conduction analysis. As a result, the thermal network model is applicable to REBCO conductors configured in series or parallel alone and multidimensional heat conduction analysis is necessary for complex cases of series and parallel configuration.

• 한국전산유체공학회:학술대회논문집
• /
• 2003.10a
• /
• pp.121-122
• /
• 2003

In this study a microchannel with various arrangement of blocks is newly proposed. This design comprises periodically arranged simple blocks. In this configuration, the stirring is greatly enhanced at a certain geometric parameter set. To characterize the flow field and the stirring effect both the numerical and experimental methods were employed. To obtain the velocity field, three-dimensional numerical computation to the Navier Stokes equations are performed by using a commercial code, FLUENT 6.0. The fluid-flow solutions are then cast into studying the characteristics of stirring with the aid of Lyapunov exponent. The numerical results show that the particles' trajectories in the microchannel heavily depend on the block arrangement. It was shown that the stirring is significantly enhanced at larger block-height and it reaches maximum when the height is 0.8 times the channel width. We also studied the effect of the block stagger angle, and it turns out that the stirring performance is the best at the block angel ${45^\circ}$.