• Korean Institute of Interior Design Journal
• /
• v.19 no.6
• /
• pp.197-205
• /
• 2010

For the spatial experience of spectators visiting a museum, the route search of trying to follow the spatial structure or production of exhibition and the information search of trying to see are accomplished at the same time. In such process, the spectator's reaction of visual perception produces the result of emotional reaction and action exchanged between human and space by going through the recognition and perception on the target of environment factor. For the spatial experience of a spectator, the reaction of visual perception which interacts according to the exhibit and exhibition environment within space according to viewing purpose, interest and concern of spectator comes out as visual activity which is an activity to understand the spatial information shown as various activities according to spatial structure and unfolding characteristics of the display. The purpose of this study is to identify The Correlation of Spectator Movement Created According to Structural Form of Exhibition Area Based on Interaction between Exhibition Area Structure and Spectator to utilize as basic material while designing museum exhibition using isovist field which is a quantitative analysis tool of spectator's visual behavior and spatial structure at each exhibition area.

• International Journal of Highway Engineering
• /
• v.18 no.5
• /
• pp.95-103
• /
• 2016

PURPOSES : Permitted left turn is a turning maneuver in which a vehicle turns left using a gap between oncoming vehicles, called gap acceptance, and it enables for more efficient traffic operation at intersections. In Korea, the permitted left turn has not been a common maneuver at signalized or un-signalized intersections. However, many experts and the Police Agency tried to apply this effective turning maneuver at intersections in Korea since 2010. Though the investigation of gap acceptance is significantly important in understanding a driver's behavior at intersections, there have not been many studies about this topic, specifically a study to develop probability models of gap acceptance behavior. METHODS : In this study, the probability model of gap acceptance behavior for a permitted left turn was developed based on observational field studies. To develop the model, seven variables were analyzed including gap, waiting time, traffic volume, conflict-flow vehicle type, left-turning vehicle type, the number of lane, and time. RESULTS : In the final model, gap and left-turning vehicle type were found to be significant influencing factors. CONCLUSIONS : Through this model development, it was concluded that as the gap size increased, the probability of gap acceptance was higher. Moreover, when a left-turning vehicle was a passenger car, the probability of gap acceptance was higher than compared to large size buses or freight cars.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.31 no.2C
• /
• pp.65-74
• /
• 2011

This paper presents an analysis of excavation behavior of an earth retaining wall supported by large diameter soil-cement blocks at a field trial site. The concept and design philosophy of the large soil-cement block reinforcement are described first. The wall behavior during sequential excavations up to 9.8 m is analyzed based on the measured lateral wall movements and earth pressures. The settlements of adjacent ground are examined by field measurements and inverse numerical analysis. The results indicate that, when the lengths of the soil-cement blocks were over 0.45 H (H: wall height), the displacements and the earth pressures induced by the excavations were similar to those supported by conventional methods such as soil nailing.

• Journal of Korean Library and Information Science Society
• /
• v.32 no.3
• /
• pp.31-58
• /
• 2001

The objective of this study was to provide the basic information necessary for the efficient library service policy for the graduate students in engineering field as investigating the academic information seeking behavior and demands of users who major in electronic engineering at a graduate program. Literature studies and survey through questionnaire were conducted for the purpose. The established theories were synthetically examined through literature studies, and theoretical systematization and structure for positive research were framed. Graduate students in engineering field were classified into two groups: those who major in electronic engineering and the others, and their demands for information and its seeking behavior were comparatively analyzed in this thesis.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2011.11a
• /
• pp.303-306
• /
• 2011

An experimental study has been conducted to investigate the effects of an ultrasonic standing-wave field to the behavior of methane/air premixed flame. Visualization technique utilizing the schlieren method was employed for the observation of premixed flame behavior. The shape of flame front and local flame velocity were measured according to the variation of reactants pressure and chamber opening/closing condition. The flame front was distorted and severely deformed to a lotus-type flame by the interaction of ultrasonic standing-wave and the reflection wave coming from an end wall of reactor.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.30 no.5 s.248
• /
• pp.576-584
• /
• 2006

The actuating performance test of plate-type piezoelectric composite actuators having different lay-up sequences was experimentally carried out at simply supported and fixed-free boundary conditions. The actuating displacement of manufactured plate-type piezoelectric composite actuator (PCA) was measured using a non-contact laser displacement measurement system. Our results revealed that the actuating displacement with increasing applied electric field at a drive frequency of 1Hz increased non-linearly at the simply supported boundary condition whereas it almost linearly increased at the fixed-free boundary condition. On the other hand, the actuating displacement of piezoelectric composite actuator depended on the applied electric field in a drive frequency range from 1Hz to 10Hz, but its behavior was different in higher drive frequencies beyond 15Hz due to the occurrence of resonance. On the basis of the above experimental results, the bending characteristics of PCAs revealed different behavior depending on applied electric fields, drive frequencies as well as boundary conditions. Therefore, by investigating drive frequencies together with applied electric fields, actuating performance can be easily controlled and PCAs which were fabricated for this study will be sufficiently applied to pumping devices.

• Proceedings of the KSME Conference
• /
• 2002.08a
• /
• pp.365-368
• /
• 2002

The design of industrial arc plasma systems is still largely based on trial and error although the situation is rapidly improving because of the available computational power at a cost which is still fast coming down. The desire to predict the behavior of arc plasma system, thus reducing the development cost, has been the motivation of arc research. To interrupt fault current, the most enormous duty of a circuit breaker, is achieved by separating two contacts in a interruption medium, $SF_{6}$ gas or air etc., and arc plasma is inevitably established between the contacts. The arc must be controlled and interrupted at an appropriate current zero. In order to analyze arc behavior in $SF_{6}$ gas circuit breakers, a numerical calculation method combined with flow field and electromagnetic field has been developed. The method has been applied to model arc generated in the Aachen nozzle and compared the results with the experimental results. Next, we have simulated the unsteady flow characteristics to be induced by arcing of AC cycle, and conformed that the method can predict arc behavior in account of thermal transport to $SF_{6}$ gas around the arc, such as increase of arc voltage near current zero and dependency of arc radius on arc current to maintain constant arc current density.

• Journal of the Korean housing association
• /
• v.9 no.3
• /
• pp.33-46
• /
• 1998

This study attempts to find out the characteristic of apartment housing sales information and housing choice behavior according to housing location. For this purpose, the apartment housing sales information in newspaper advertising was investigated and analyzed by advertising appeals to clarify the phenomenon of apartment housing sales and the components of home environmental quality according to housing location in Pusan. Then the field survey has been carried out based on 176 households living in Pusan. The major findings are as follows: 1) The components of home environment through AAs were divided into three categories of appeals: residential area, site area and dwelling unit area. 2) Apartment housing developments were differentiated according to period of development and occupancy scales according to housing location. 3) The results of field survey showed users' housing location. 4) The characteristics of apartment housing sales information according to housing location were revealed those characteristic were concentrated on the category of residential area than site area or dwelling unit area. But in housing choice behavior, the characteristics of housing location appeared in all categories of home environment. Therefore, for better apartment housing development and planning, the characteristics of housing location need to be considered more actively.

• Korean Management Science Review
• /
• v.32 no.2
• /
• pp.1-14
• /
• 2015

The importance of technical innovation is increasing gradually in accordance with the life cycle of technology being shortened and the convergence being accelerate. This thesis aims to present the Framework of Competency Model of Techno Leadership capable of utilizing in promoting R&D (Research and Development) Leaders systematically by the technology based enterprise. The characteristic of core behavior necessary for Techno Leaders has been sorted out through the literature investigation and the analysis course of meaning, etc., the competency model of Techno Leadership has been deducted by analyzing the relation with MOT (Management of Technology) capacity being common skill of task necessary for Techno Leaders and the characteristic of behavior based on this through the questionnaire survey. The possibility of application in the field as well has been verified by applying the developed competency model in the actual field of enterprise. The competency model of techno Leadership developed in this research may be utilized in the direction establishment for the promotion of Techno Leadership in the enterprise or laboratory, especially, if would be effective to self-diagnose the core competency necessary for R&D manpower to be grown as the Techno leader in the IT oriented enterprise and to establish the improvement direction.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.29 no.3 s.234
• /
• pp.376-383
• /
• 2005

In the paper we investigate characteristics of a transitional behavior from a premixed flame to a triple flame in a lifted flame according to the change of equivalence ratio. In previous study, we showed that the stabilized laminar lifted flame regime is categorized by regimes of premixed flame, triple flame and critical flame. A gas-chromatograph is used to measure concentration field, a smoke-wire system is used to measure streak line, and a PIV system is used to measure velocity field in lifted flame. In the visualization experiment of smoke wire, the flow divergence and redirection reappeared in premixed flame as well as triple flame. Thus we cannot express the flame front of lifted flame has a behavior of triple flame with only flow divergence and redirection. In PIV measurement, flow velocity for those three flames has minimum value at the tip of flame front. To differentiate triple flame and premixed flame, $\Phi$ value of partially premixed fraction is employed. The partially premixed fraction $\Phi$ was constant in premixed flame. In critical flame small gradient appears over the whole regime. In triple flame, typical diffusion flame shape is obtained as parabolic distribution type due to diffusion flame trailing.