• 방사선산업학회지
• /
• 제6권1호
• /
• pp.41-47
• /
• 2012

A field tracer experiment using a radioisotope was conducted to analyze the transport and dispersion characteristics of pollutants in the coastal area near a Wolsung. A rod float including GPS was released to track the paths of radioisotope. NaI detector was installed to measure the released radioisotope from the boat, and measurements were performed with the real time. The measured tracer data by a field experiment can be used as the basic data for understanding the transport characteristics of pollutants and verifying numerical models near the offshore.

• Journal of Radiation Protection and Research
• /
• 제29권3호
• /
• pp.205-212
• /
• 2004

대기중으로 방출된 방사성물질의 농도분포를 예측하기 위하여 3차원 바람장 및 확산모델을 개발하였다. 대기 확산모델의 검증을 위하여 복잡한 지형에 위치한 고리 원전 주변에서 야외 확산실험을 수행하였다. 확산모델의 계산 값에 가장 중요한 영향을 주는 것은 바람장의 분포이다. 따라서 관측된 바람자료를 이용하여 여러 경우에 대한 수치실험을 수행하여 계산 값이 관측 농도 값에 좀더 유사하게 접근하는 가를 살펴보았다. 비교결과 바람장 모델내 많은 관측 바람장을 이용한 경우에 관측 농도 값에 가장 근접함을 알 수 있었다.

• 한국대기환경학회지
• /
• 제18권6호
• /
• pp.437-452
• /
• 2002

The Metropolitan Tracer Experiment (METREX) was performed over the Washington, D.C. area using two inert, non-deposition perfluorocarbon gases for over 1 year period (November 1983∼December 1984). Two perfluorocarbon gas tracers (PDCH, PMCH) were released simultaneously at intervals of every 36 hours for 6 hours, regardless of the meteorological conditions in metropolitan area. Samples were collected continuously for 8 hours at a central downtown and two adjacent suburban locations. Monthly air samples were collected at 93 sites across the whole region (at urban, suburban, and rural locations). The purpose of this study is to simulate INPUFF and ISCST model using METREX data, and to compare calculated and observed concentrations. In the case of INPUFF simulation, two meteorological input data were used. One is result data from wind field model which was calculated by diagnostic wind model (DWM), the other is meteorological data observed at single station. Here, three kinds of model calculation were performed during April and July 1984; they include (1) INPUFF model using DWM data (2) INPUFF model using single meteorological data (3) ISCST model. The monthly average concentration data were used for statistic analysis and to draw their horizontal distribution patterns. Eight-hour-averaged concentration was used to describe movement of puff during the episode period. The results showed that the concentrations calculated by puff model (INPUFF) were better than plume model (ISCST). In the case of puff model (INPUFF), a model run using wind field data produced better results than that derived by single meteorological data.

• Journal of Radiation Protection and Research
• /
• 제24권1호
• /
• pp.31-38
• /
• 1999

원자력시설의 사고시 신속한 방재대책 결정지원 체계를 수립하기 위하여 실시간 방사선 피폭해석 시스템(FADAS : Following Accident Dose Assessment System)을 개발하였다. 개발된 시스템의 정확도 향상 및 국내 부지 특성자료의 모수화를 위하여 복잡한 지형상에 위치한 영광 원자력발전소 주변에서 야외 확산실험이 수행되었다. 확산실험을 통하여 얻어진 바람의 평균 및 난류장 성분은 부지 특성별 변수로 실시간 방사선 피폭해석 시스템에 반영되었다. 확산모형의 계산결과와 실험을 통하여 관측된 추적자 가스의 농도분포를 상호 비교한 바 어느 정도 일치하고 있었다. 개발된 시스템은 현재 구축중인 국가 규모의 비상대응지원체제에 기본 모듈로서 활용 중에 있으며 지속적인 확산실험을 통하여 부지 특성 변수들이 반영된 확산모형을 개선할 예정이다.

• 한국대기환경학회지
• /
• 제12권5호
• /
• pp.529-540
• /
• 1996

Dispersion experiment using SF$_{6}$ tracer was performed in the flat field of Chunchon Basin during four nights from August 29 to September 2, 1991. The purpose of this study is to analyze toe horizontal distribution of tracer concentration under the strong stable conditions and to evaluate the results calculated by INPUFF model. Incase of high wind speed, plume spread of SF$_{6}$ concentration appeared in narrow area of the downwind and the standard deviation of the horizontal wind angle (.sigma.$_{a}$) was amall. However, the SF$_{6}$ was spread widely in cases of low wind speed because of the large .sigma.$_{a}$. The result of the INPUFF model was similar to the observed distribution of the SF$_{6}$ concentration. It is proved that the Gaussian puff model is useful when wind direction varies significantly.tly.tly.tly.

• 방사선산업학회지
• /
• 제2권3호
• /
• pp.155-161
• /
• 2008

A hydraulic scale model was constructed to investigate the characteristics of flows and pollutant transport in laboratory. The distorted hydraulic scale model by assuming Froude similarity was adopted to represent hydrodynamics and dispersion in a river system. The scale model was composed of water reservoir, slope control part, booster pump, distributing plate and main channel. A constructed scale model will be used to present the overall concentration profiles of tracer and a research will be performed to convert the measured values using a hydraulic scale model to real field scale.

• 방사선산업학회지
• /
• 제2권3호
• /
• pp.135-140
• /
• 2008

A field tracer experiment using radioisotope was carried out to investigate the characteristics of a pollutant transport and a determination of the dispersion coefficients in a river system. The dispersion coefficients in the longitudinal and transverse directions were determined by using the measured concentration of a radioisotope. The two-dimensional numerical models were applied to calculate the flow and concentration fields at the experimental site. Several numerical simulations were performed to investigate the effects of the numerical results according to variations of the dispersion coefficients. The calculated concentrations agreed well with the measured ones.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 1999년도 춘계학술발표회요약집
• /
• pp.361-361
• /
• 1999

• 한국농공학회논문집
• /
• 제54권3호
• /
• pp.37-45
• /
• 2012

Recently, the livestock industry in Korea was heavily affected by the outbreak of official livestock diseases such as foot and mouse disease, high pathogenic avian influenza, swine influenza, and so on. It has been established that these diseases are being spread through direct contact, droplet and airborne transmission. Among these transmissions, airborne transmission is very complex in conducting field investigation due to the invisibility of the pathogens and unstable weather conditions. In this study, the airborne transmission was thoroughly investigated inside a pig house by conducting tracer gas ($CO_2$) experiment because experiment with real pathogen is limited and dangerous. This is possible as it can be assumed that the flow is similar pattern very fine particles and gas. In the experiment, the ventilation structure as well as the location of gas emission were varied. The $CO_2$ detection sensors were installed at 0.5 and 1.3 m height from the floor surface. The tracer gas level was measured every second. Results revealed that the direction of spread can be determined by the response time. Response time refers to the time to reach 150 ppm from the gas emission source at each measuring points. The location of the main flow as well as the gas emission was also found to be very important factor causing the spread.

• 한국소프트웨어감정평가학회 논문지
• /
• 제17권2호
• /
• pp.109-116
• /
• 2021

전통적으로 공학분야는 실험 실습 위주의 대면 교육이 주를 이루어 왔으나, IT 기술 및 인터넷 통신망의 급속한 발전과 최근 COVID-19 등의 사회적 환경 변화로 인해 온라인 학습에 대한 수요가 급증하고 있다. 다른 분야에 비해 실험 실습의 비중이 상대적으로 높은 공학 분야에서 효율적인 온라인 교육이 이루어지려면 실제 실험 실습을 대체할 수 있는 가상 실험실습 콘텐츠가 매우 필요하다. 본 연구에서는 전기전자 분야 뿐만 아니라 IT 융합이 이루어지고 있는 전반적인 공학 분야에서 필수적으로 사용되고 있는 마이크로프로세서의 효율적인 온라인 응용 학습을 위해 라인 트레이서 모델을 개발하고 이를 시뮬레이션 할 수 있는 가상실험 소프트웨어를 개발하였다. 개발된 라인 트레이서 모델에서 사용자는 원하는 형태로 하드웨어 파라미터 값들을 다양하게 설정하고, 이에 따른 소프트웨어를 어셈블리 언어나 C 언어 등으로 작성하여 컴퓨터 상에서 동작을 시험해 볼 수 있도록 구성되었다. 개발된 라인 트레이서 가상 실험 소프트웨어는 실제 수업에 활용하여 동작을 검증하였으며, 앞으로 온라인 상에서 이루어지는 비대면 수업에서 효율적인 가상 실험 실습 도구가 될 것으로 기대된다.