• Journal of Ginseng Research
• /
• 제14권1호
• /
• pp.50-56
• /
• 1990

Root-rot of ginseng caused by Fusarium solani is one of the most obstacles to ginseng cultivation. We evaluated some inoculating techniques of ginseng with Fusarium solani, for selection of disease resistant breeding lines. The most effective inoculating techniques evaluated were inserting toothpicks colonized by F. solani into the seedling roots in laboratory test and dusting seedlings with vermiculite after dipping in conidial sllspension and then replanting method in field test. The resistance to diseased by F. solani was lines of 82022 and 82066 in laboratory test. 82920-1 and 78093 in field test.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2010년도 추계학술대회
• /
• pp.215-217
• /
• 2010

This paper describes the test results of radiated compatibility with Ariane 5 launcher performed on the COMS Satellite test facility. Firstly, the Radiated Emission test results are analyzed in compliance with the Radiated Susceptibility requirement specification of Ariane 5 launcher. The satellite nominal operation is monitored during injection a radiated electric field corresponding to the launcher emissions levels in critical frequency ranges. And also, E-field are measured through a probe located at external units level in order to assess the EMC safety margin in Radiated mode.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 학술대회 논문집 정보 및 제어부문
• /
• pp.15-18
• /
• 2004

In this paper, it is implemented the monitoring system for TV advertisement using video watermark. The functions of an advertisement monitoring system are automatically monitoring for the time, length, and index of the on-air advertisement, saving the log data, and reporting the monitoring result. The performance of the video watermark used in this paper is tested for TV advertisement monitoring. This test includes LAB test and field test. LAB test is done in laboratory environment and field test in actually broadcasting environment. LAB test includes PSNR, distortion measure in image, and the watermark detection rate in the various attack environment such as AD/DA(analog to digital and digital to analog) conversion, noise addition, and MPEG compression The result of LAB test is good for the TV advertisement monitoring. KOBACO and SBS are participated in the field test. The watermark detection rate is 100% in both the real-time processing and the saved file processing. The average deviation of the watermark detection time is 0.2 second, which is good because the permissible average error is 0.5 second.

• 전기학회논문지
• /
• 제56권1호
• /
• pp.206-213
• /
• 2007

In this paper, The monitoring system for TV advertisement is implemented using video watermark. The functions of the advertisement monitoring system are monitoring the time, length, and index of the on-air advertisement, saving the log data, and reporting the monitoring result. The performance of the video watermark used in this paper is tested for TV advertisement monitoring. This test includes LAB test and field test. LAB test is done in laboratory environment and field test in actually broadcasting environment. LAB test includes PSNR, distortion measure in image, and the watermark detection rate in the various attack environment such as AD/DA(analog to digital and digital to analog) conversion, noise addition, and MPEG compression. The result of LAB test is good for the TV advertisement monitoring. KOBACO and SBS are participated in the field test. The watermark detection rate is 100% in both the real-time processing and the saved the processing. The average deviation of the watermark detection time is 0.2 second, which is good because the permissible average error is 0.5 second.

• Current Optics and Photonics
• /
• 제5권2호
• /
• pp.164-172
• /
• 2021

In this paper a catadioptric laser-irradiation-precision test system is designed, to achieve a high-precision laser-irradiation-accuracy test. In this system, we adopt the method of imaging the entire target surface at a certain distance to realize the measurement of laser-irradiation precision. The method possesses the advantages of convenient operation, high sensitivity, and good stability. To meet the test accuracy requirement of 100 mm/km (0.01%), the coma, field curvature, and distortion over the entire field of view should be eliminated from the optical system's design. Taking into account the whole length of the tube and the influence of stray light on the structure type, a catadioptric system with a hood added near the primary imaging surface is designed. After optimization using the ZEMAX software, the modulation transfer function (MTF) of the designed optical system is 0.6 at 30 lp/mm, the full-field-of-view distortion is better than 0.18%, and the energy concentration in the 10-㎛-radius surrounding circle reaches about 90%. The illumination-accuracy test results show that the measurement accuracy of the radiation hit rate is better than 50 mm when the test distance is 1 km, which is better than the requirement of 100 mm/km for the laser-irradiation-accuracy test.

• 한국초등과학교육학회지:초등과학교육
• /
• 제24권5호특별호
• /
• pp.495-503
• /
• 2005

The purpose of this study was to analyze elementary school students' attitudes through field-experience teaming activities program for the integrated textbook on the environment issues. This study was conducted after implementing the field environmental education for fifth graders with the teaching-teaming plan applied to the field education and was based on the analysis of environment-related education for the fifth graders. A total of 64 elementary students, 32 in the experimental group and 342 in the control group, were involved in this study. The study used the instrument consisting of 36 Likert-type questions on attitudes toward environment. After going over the influences of the field environmental education program on the students, we found out the positive development in the pre-test and post-test, concerning all environmental themes, especially in the field of protection of animals, environmental pollution, and environment in general.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 정기총회 및 추계학술대회 논문집
• /
• pp.2107-2114
• /
• 2011

To carry out the evaluation of performance of railway product/system, 3 step verification process(design review-lab test-field test) should be done. In advanced countries, for the effective field test, test-only-oriented track have been constructed and used. In Korea, government announced "The construction plan of railroad test track" at 2009.06. This paper will summarize 'need of test track', 'technical meaning of test track', 'current status of foreign test track', 'fundamental plan and process strategy of Korea Railroad Test Track'. It is no need to say that the wisdom of all railroad related people is required for the successful construction and usage of Korea Railroad Test Track.

• 한국도로학회논문집
• /
• 제8권4호
• /
• pp.75-85
• /
• 2006

포장하부구조의 지지력을 평가하기 위해 많이 사용되는 방법은 평판재하시험(Plate Bearing Test) 현장 CBR시험(California Bearing Ratio Test) 등이 있으나, 시험을 수행하는데 있어 많은 인력과 시간이 소비되는 단점이 있어, 많은 연구자들은 현장에서 포장하부구조의 강성을 측정할 수 있는 간편한 방법으로 동적 콘 관입시험(Dynamic Cone Penetrometer Test)을 제안하였다. 이에 본 연구에서는 DCP의 현장적용성을 평가하기 위해, 총 4개 현장의 노상층과 보조기층에서 DCP, 평판재하시험, 현장CBR시험, FWD시험을 동시에 수행하여 그 결과를 상호 비교 분석하였다. 그 결과 DCPI, $M{FWD},\;PBT\underline{\;}K_{30}$은 서로 일정한 상관관계가 존재하는 것으로 나타났으나, CBR은 다른 결과 값들과 비교한 결과 상관관계가 매우 낮은 것으로 나타났다. 본 연구에서는 이 결과로부터 $DCPI-M_{FWD},\;DCPI-PBT\underline{\;}K_{30}$ 관계식을 다음과 같이 제안하였다. $$M_{FWD}=993.10\Big(\frac{1}{DCPI}\Big)+33.95\;R^2=0.774$ $$M_{FWD}=3.7533K_{30}+23.085\;R^2=0.69$$

• 한국전자파학회논문지
• /
• 제29권10호
• /
• pp.745-751
• /
• 2018

본 논문에서는 차량 LTE 통신용 다중대역 MIMO 안테나를 설계하고, 이를 차량에 부착하여 수행한 데이터 전송률 필드테스트 측정 결과에 대한 분석을 다루고 있다. 필드테스트에 이용된 안테나는 다중대역 공진 특성 확보를 위해 다수의 스터브를 포함한 평판 구조로 LTE(0.8~0.9 GHz, 1.7~2.2 GHz), WiFi(2.4~2.48 GHz) 및 WAVE(5.8~5.9 GHz) 주파수 대역에서 동작하도록 설계하였다. 안테나 시작품을 차량의 대시보드 및 루프에 설치하고, 실험용 LTE 모뎀에 연결하여 다양한 실전파 환경에서의 데이터 전송률(throughput), 신호 대 잡음 간섭비(SINR), 참조 신호 수신 품질(RSRQ) 등을 측정하고 분석하였다. 이를 바탕으로 전계 강도에 따른 SINR과 데이터 전송률 사이의 관계를 확인하였다.

• 드라이브 ㆍ 컨트롤
• /
• 제20권4호
• /
• pp.71-79
• /
• 2023

In the field of agricultural machinery, various on-field tests are conducted to measure design load for optimal design of agricultural equipment. However, field test procedures are costly and time-consuming, and there are many constraints on field soil conditions due to weather, so research on utilizing simulation to overcome these shortcomings is needed. Therefore, this study aimed to model agricultural soils using discrete element method (DEM) software. To simulate draft force, predictions are made according to travel speed and compared to field test results to validate the prediction accuracy. The measured soil properties are used for DEM modeling. In this study, the soil property measurement procedure was designed to measure the physical and mechanical properties. DEM soil model calibration was performed using a virtual vane shear test instead of the repose angle test. The DEM simulation results showed that the prediction accuracy of the draft force was within 4.8% (2.16~6.71%) when compared to the draft force measured by the field test. In addition, it was confirmed that the result was up to 72.51% more accurate than those obtained through theoretical methods for predicting draft force. This study provides useful information for the DEM soil modeling process that considers the working speed from the perspective of agricultural machinery research and it is expected to be utilized in agricultural machinery design research.