• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2019.05a
• /
• pp.252-253
• /
• 2019

Corrosion of rebars in reinforced concrete structures is a major factor that shortens the life of the structure. As corrosion progresses, the adhesion between the concrete tissues and the rebar decreases and the cracks in the concrete due to the expansion of the oxide intensify. Although it is necessary to measure corrosion behavior of rebars inside the concrete to measure degradation of structures due to rebar corrosion, no studies have been conducted to measure corrosion of rebars in In-situ state. In this study, corrosion of rebars in reinforced concrete specimens was attempted to be quantified using micro-computer tomography. Since corrosion of concrete takes several months per 10mm of cover, accelerated corrosion techniques were applied. Accelerated corrosion on the specimen was conducted by applying a 10 V magnetic field to the buried rebar and external electrodes with the specimen submerged in a 10% calcium chloride solution. The experiment found that within two weeks, more than 40% of rebar reduction occurred, and the cracks in the radial cracks occurred through the concrete structure, leading to the transfer of the oxide produced through the cracks to the surface of the specimen.

• Bulletin of the Society of Naval Architects of Korea
• /
• v.6 no.2
• /
• pp.5-10
• /
• 1969

A stepped bar with seimi-circular stress relieving groove near the fillet was subjected by axial tension in a polarized light field. On the stress concentration factor, the effect of the ratios of the fillet radius, the distance between two relieving grooves and the groove radius to the breath of the narrower portion of the stepped bar have been investigate. Observing the stress concentration in 48 models with various proportions, the conclusion arrived at were as follow: 1) If the fillet radius of the stepped bar is larger than half breadth of the narrower portion, the reduction of the stress concentrations can not be expected. 2) If the fillet radius is smaller than half breadth of the narrower portion of the stepped bar, the stress concentration can be droped to the reasonable range. 3) When the groove radius is larger than a quarter of the difference between the distance of two relieving grooves and the breadth of the stepped bar and smaller than a half of that, the stress concentration factors can have their possible minimum value. 4) When the sun of the breadth of the narrower portion of the stepped bar and twice of the relieving groove radius is smaller than the distance between two relieving grooves, minimum stress concentration can be obtained.

• The Journal of Asian Finance, Economics and Business
• /
• v.9 no.5
• /
• pp.345-354
• /
• 2022

The importance of the public sector's role in fostering a positive business climate has prompted public sector organizations to consistently enhance their performance. The study aims to develop service orientation dimensions for public sectors and examine the relationship between service orientation and organizational performance. A field survey was employed in this study. Six hundred questionnaires were distributed, and four hundred and eighty-eight were returned and analyzed. Factor analysis and multiple regression analysis were used in the dataset. This study identifies five dimensions of organizational service orientation in public sector service organizations: technology-service standard-communication, service vision, service delivery, service training and powering, and servant leadership. The result also concludes that service orientation influences organizational performance, such as corporate growth, service quality image, IT effectiveness, service innovation, and public complaint. This study's findings imply that public sector organizations should rectify service orientation factors to increase corporate growth, service quality image, IT effectiveness, service innovation, and public complaint reduction. Managerial guidelines are presented for developing a service orientation.

• Geomechanics and Engineering
• /
• v.31 no.1
• /
• pp.71-86
• /
• 2022

In Taiwan, an efficient approach for enhancing the stability of colluvium slopes is the drilled shaft method. For slopes with drilled shafts, the soil arching effect is one of the primary factors influencing slope stability and intertwines to the failure mechanism of the pile-soil system. In this study, the contribution of soil arching effect to slope stability is evaluated using the FEM software (Plaxis 3D) with the built-in strength reduction technique. The result indicates the depth of the failure surface is influenced by the S/D ratio (the distance to the diameter of piles), which can reflect the contribution of the soil arching effect to soil stability. When α (rock inclination angles)=β (slope angles) is considered and the S/D ratio=4, the failure surface of the slope is not significantly influenced by the piles. Overall, the soil arching effect is more significant on α=β, especially for the steep slopes. Additionally, the soil arching effect has been included in the proposed stability charts. The proposed charts were validated through two case studies, including that of the well-known Woo-Wan-Chai field in Taiwan. The differences in safety factor (FoS) values between the referenced literature and this study was approximately 4.9%.

• Journal of the Korea Safety Management & Science
• /
• v.26 no.2
• /
• pp.79-86
• /
• 2024

Scientific exploration of how occupational health risks relate with occupational illnesses are essential for mitigating health-related issues in industries. This study analyzed the risk scores obtained by occupational health risk assessments at 3,172 manufacturing companies and examined their effects on occupational illness. Statistical analyses revealed that companies with an occupational health manager (scored 89.1 out of 100) had significantly higher activity scores of health management compared to those without (78.2). However, companies with a history of occupational illness (79.1) or those classified as high-risk industries (85.2) had significantly lower activity scores than their counterparts (81.7, 87.3). In addition, regression analyses using factor analysis showed that latent risk factors such as cardiovascular disease/job stress, health management, and musculoskeletal problem significantly influenced the risk of occupational illness. The activity factors such as health management, work environment management, and regulatory complaisance significant impacted the reduction of occupational illness. The findings of this study can be used to improve the occupational health risk assessment method and utilized in effectively managing occupational risks in industries.

• Korean Journal of Weed Science
• /
• v.32 no.1
• /
• pp.17-24
• /
• 2012

The study was conducted to investigate the effect of weed interference and starter fertilizer on subsequent soybean seed quality at the Agricultural Research Farm and Laboratory of Razi University, Kermanshah, Iran. Two factorial experiment was laid-outon a randomized complete block design with four replications. First factor was starter fertilizer levels (0 and 25 kg $ha^{-1}$) applied in the forms of monoammonium phosphate, the second factor was different weed interference periods consisted of five initial weed-free periods (in which, plots were kept free of weeds for 0, 15, 30, 45 and 60 days after crop emergence (DAE) and then weeds were allowed to grow until harvest) and five initial weed-infested periods (in which, weeds were allowed to grow for 0, 15, 30, 45 and 60DAE, after which the plots were kept free of weeds until harvest). Full season weedy condition reduced 100-seed weight, seed germination percentage and seedling dry weight by 25.9, 13.3 and 22.5%, respectively and increased mean germination time and seed electrical conductivity by 55.8 and 24.3%, respectively as compared with full season weed-free control. However, the traits under study were not significantly influenced when field was kept free of weeds for at least 45 DAE (R1) or weedy condition was continued for less than 30 DAE (V8). There was a significant and negative correlation between weed biomass and seed weight (r = -0.93), so that when weed free condition was less than 45 DAE or weed infested period was continued for at least 30 DAE, soybean plants produced wrinkled and underdeveloped seeds with lower weights and qualities. Moreover, soybean seed quality reduction due to weed interference was more evident when starter fertilizer was applied and weeds interfered with soybean from the beginning of the growing season. Information from the present study is beneficial in soybean seed production systems and where farmers use the harvested seeds for the following planting.

• The Journal of the Korea Contents Association
• /
• v.10 no.2
• /
• pp.258-267
• /
• 2010

This interest in radiation exposure makes increasing doctor's awareness and knowledge of radiation dose in patients during X-ray test important in reducing patient's uneasiness. However, very few facilities are equipped with measurement instruments. Therefore, an intensive study to find out patient dose using computational method has been initiated. This study used special features of the bit system and NDD-M and directly measured the output dose of diagnostic X-ray instruments used in Korea to create tables. Two different methods were found to be adequate when applied to cases when X-ray outputs were both known and unknown, and comparative experiments with real measurement doses were carried out. Presented methods were found to provide more accurate results compared to the bit system and NDD-M. Therefore, patient dose during clinical trials were found to be more easily acceptable to medical personnel in the radiation field in terms of radiation exposure and reduction of medical X ray dose.

• Journal of the Korea Institute of Building Construction
• /
• v.15 no.4
• /
• pp.433-439
• /
• 2015

The aim of this study is to suggest basic data about efficient motivation plans for improving the image of the design and Construction Management (CM) field and enhancing professional consciousness of employees. The major findings and conclusions of this study are as follows. First, the employees in design firms had a relatively high level of dissatisfaction with the 'Reduction of work hours', and those in CM companies had a relatively high level of dissatisfaction with the 'Fringe benefit conditions'. Second, when the effects of the items of job satisfaction on overall job satisfaction were analyzed through factor analysis, job performance satisfaction had the biggest effect on the employees in design firms, and intrinsic reward and opportunity satisfaction had the biggest effect on those in CM companies.

• Journal of Environmental Health Sciences
• /
• v.36 no.5
• /
• pp.373-382
• /
• 2010

A number of recent studies have shown that occupational stress is closely associated with increased fatigue and decreased job satisfaction. This study was designed to assess stress in workers in the field of EIA (environment impact assessment) from July 2009 through september 2009, and questionnaires were uesd to analyze the stress scores and identify the primary factors influencing stress in this occupation. The number of respondents was 272 working in the Capital (Seoul and Kyunggido), Chungcheongdo, Jejudo area. A structured questionnaire was used to evaluate the participants' socio-demographics, job-related factors, health-related behaviors, occupational stress, reaction factor (self-perceived fatigue, job satisfaction) and buffer factor (social support). Occupational stress and self-perceived fatigue were assessed using the Korean Occupational Stress Scale-Short Form (KOSS-SF) and the Multidimensional Fatigue Scale (MFS), respectively. The analysis revealed a strong correlation between occupational stress, job satisfaction, and social support, with occupational stress being associated with an increased risk of fatigue and decreased job satisfaction. In the multiple regression analysis(stepwise), the main factors influencing occupational stress were found to be job satisfaction, supervisor, fatigue, working time, no. of personnel, career. The results of this study suggest that occupational stress is a determinant predictor of self perceived fatigue and job satisfaction. Thus, a strong recommendation is made for a stress management program for reduction of occupational stress, and for the development of relevant experts on the health and quality of life of environment impact assessment workers.

• International Journal of Highway Engineering
• /
• v.9 no.4
• /
• pp.135-147
• /
• 2007

Segregation in asphalt pavements occurs as a result of the non-uniform distribution of coarse and fine aggregates and causes premature distresses, such as cracking, raveling, and stripping. The effect of segregation on rutting, however, has not been clearly identified. Experimental and analytical work performed in this study indicates that rutting performance is affected by segregation of mixtures. However, the aggregate structure of mixtures appears to be a more critical factor that determines the rutting performance, rather than the level of segregation. Based on the field mixtures evaluated, an increase of coarse aggregate volume in an asphalt mixture is an important factor that results in good rutting performance. This effect holds true for mixtures with lower levels of air voids, but for mixtures with higher levels of air voids, the air voids effect becomes dominant, resulting in a reduction in rutting performance. An air void content of 10% appears to be a threshold that determines the rutting performance of Superpave mixtures. Once the air void content exceeds 10%, the rutting performance of Superpave mixtures decreases significantly, despite the coarse aggregate volume.