• Journal of the Korea institute for structural maintenance and inspection
• /
• v.22 no.6
• /
• pp.9-15
• /
• 2018

According to the development and use of self-consolidating concrete in field, interest in material properties of early-age concrete is rising. Setting time with hydration process of cement is one of significant indicator to evaluate the early-age material properties of concrete, various nondestructive methods including penetration resistance measurement have been proposed to estimate setting time. This study performed an experimental approach to evaluate setting time delay in mortar adding superplasticizer using electrical resistivity measurement. For this purpose, total nine types of mortar samples were prepared, and its electrical resistivity was monitoring during 24h after mixing. From the experimental result, rising time of electrical resistivity was used to evaluate setting delay of mortar, and penetration resistance was also measured for comparison. In addition, dynamic elastic modulus and compressive strength of 1day mortar were measured to investigate a possibility the use of electrical resistivity measurement for evaluation of early-age material properties.

• Economic and Environmental Geology
• /
• v.34 no.2
• /
• pp.205-215
• /
• 2001

The purpose of this study is to analyze the landslide susceptibility, containing the process, which reveals spatial relationships between landslides and geospatial data sets, which occurred in Janghung area in 1998. Landslide locations were detected from remotely sensed image and field survey and topography, soil, forest, and land use data sets were constructed as a spatial database in GIS. As the landslide occurrence factors, slope, aspect, curvature and type of topography, texture, material, drainage and effective thickness of soil, type, age, diameter and density of wood and land use were used. To extract the relationship between landslides and geospatial database, likelihood ratio was calculated and compared with the result of Yongin area. Also, the landslide susceptibility index was calculated by summation of the likelihood ratio and the landslide susceptibility map was generated using the index. As a result, it is expected that spatial relationships between landslides and geospatial database is helpful to explain the characteristics of lilndslide and the landslide susceptibility map is used to reduce associated hazards, and to plan land use and construction.

• The KIPS Transactions:PartD
• /
• v.13D no.5 s.108
• /
• pp.699-708
• /
• 2006

The latest biometric field have marched fast with security technology of IT. As importance of present biometrics is realized, internal and external biometrics software market is trend that is soaring. Accordingly, high reliability of biometric software and request of high quality software are enlarged. Evaluation items and criteria must be established for biometric software quality assurance. In this paper, we development the evaluation module for biometric software test based on ISO/IEC 12119 that is the standard about software quality requirement and test, and ISO/IEC 9126 that is standard about evaluation of software product, and ISO/IEC 14598-6 that is the standard about construction of the evaluation module. Constituents of biometric software products(product descriptor, user document program and data) is subject to the quality evaluation module that we developed in this paper, we can expect improvement in the quality of software by using with a standard such as ISO/IEC 9126-3 that can be used in software development process.

• Journal of Radiation Industry
• /
• v.9 no.1
• /
• pp.9-13
• /
• 2015

Epoxy resin is widely used as aerospace, automobile, construction and electronics due to their good mechanical and electrical properties and environmental advantages. However, the inherent flammability of epoxy resin has limited its application in some field where good flame retardancy is required. Nano clay can enhance the properties of polymers such as flames retardancy and thermal stability. In this study, we have investigated the nanoclay filled epoxy composite, which has good flame retardancy while maintaining high mechanical properties. The cured epoxy resins were obtained using an electron beam curing process. The nano clays were dispersed in epoxy acrylate solution and mechanically stirred. The prepared mixtures were irradiated using an electron beam accelerator. The composites were characterized by gel content and thermal/mechanical properties. Moreover, the flammability of the composite was evaluated by limited oxygen index (LOI). The flame retardancy of nano clay filled epoxy composite was evidently improved.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.28 no.8
• /
• pp.305-310
• /
• 2016

A thermal storage systems was designed to correspond to the temporal or quantitative variation in the thermal energy demand, and most of its heat is stored using the latent and sensible heat of the heat storage material. The heat storage method using latent heat has a very complex phenomenon for heat transfer and thermal behavior because it is accompanied by a phase change in the course of heating/cooling of the heat storage material. Therefore, many studies have been conducted to produce an experimentally accessible as well as numerical approach to confirm the heat transfer and thermal behavior of phase change materials. The purpose of this study was to investigate the problems encountered during the actual heat transfer from an internal storage tank through simulation of the process of storing and utilizing thermal energy from the thermal storage tank containing charged PCM. This study used analysis methods to investigate the heat transfer characteristics of the PCM with simultaneous heating/cooling conditions in the rectangular space simulating the thermal storage tank. A numerical analysis was carried out in a state considering natural convection using the ANSYS FLUENT(R) program. The result indicates that the slope of the liquid-solid interface in the analysis field changed according to the temperature difference between the heating surface and cooling surface.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.20 no.6
• /
• pp.400-408
• /
• 2008

Multipurpose Dam, it produces electric energy by converting the potential energy into kinetic energy utilizing its head and quantity of the water. However, in this process, since during the time when the turbine connected to the hydraulic turbine generator revolves, there occurs a ceaseless loud noise, and due to this condition, it is true state that those people who work at inside of the power plant are damaging as hard as they are unable to concentrate on their work. Not only this, because the hydro-electric power generator room that locates at middle section between the hydraulic turbine room and the office is very large space volume, also since it was constructed chiefly by the reflecting material, it is functioning of amplify the noise when operating the generator, the soundproof measure against this condition is necessitated. On such viewpoint, I have presented the problem point of the relevant Hydraulic turbine dynamo and Hydraulic turbine dynamo room, and after improve such problem point, this study has ever investigated the satisfying degree about the noise-reduction at before and after of the improvement of soundproof measure, using the Auralizational technique that can experience virtual acoustic field. It is considering that such result could be utilized usefully as the fundamental material hereafter for the acoustic performance of the hydro-electric power generator room in dam and when its construction.

• Geomechanics and Engineering
• /
• v.17 no.4
• /
• pp.367-374
• /
• 2019

This study concluded the results of a research on the features of cement based permeation grout, based on some important grout parameters, such as the rheological properties (yield stress and viscosity), coefficient of permeability to grout ($k_G$) and the inject ability of cement grout (N and $N_c$ assessment), which govern the performance of cement based permeation grouting in porous media. Due to the limited knowledge of these important grout parameters and other influencing factors (filtration pressure, rate and time of injection and the grout volume) used in the field work, the application of cement based permeation grouting is still largely a trial and error process in the current practice, especially in the local construction industry. It is seen possible to use simple formulas in order to select the injection parameters and to evaluate their inter-relationship, as well as to optimize injection spacing and times with respect to injection source dimensions and in-situ permeability. The validity of spherical and cylindrical flow model was not verified by any past research works covered in the literature review. Therefore, a theoretical investigation including grout flow models and significant grout parameters for the design of permeation grouting was conducted in this study. This two grout flow models were applied for three grout mixes prepared for w/c=0.75, w/c=1.00 and w/c=1.25 in this study. The relations between injection times, radius, pump pressure and flow rate for both flow models were investigated and the results were presented. Furthermore, in order to investigate these two flow model, some rheological properties of the grout mixes, particle size distribution of the cement used in this study and some geotechnical properties of the sand used in this work were defined and presented.

• Journal of the Architectural Institute of Korea Planning & Design
• /
• v.34 no.1
• /
• pp.83-94
• /
• 2018

UNESCO has continued to work in Africa, especially in the six southern sub-Saharan countries, and Asia, where international cooperation is needed. The CLC (Rwanda Community Learning Center) covered in this study aims to create a regional learning center in Rwanda and to recover local communities and provide learning environment. During the course of this study, we conducted field trips for actual planning and reviewed the current state of educational and cultural facilities that recently opened and are operated, and found implications. In consultation with the Rwandan Educational Commission, the site for CLC was decided, the building was designed, and the construction is about to start. The results of this study are as follows. First, in addition to the efforts of the activists in the village, which can be considered the smallest unit of a local community, the approach for establishing an architectural space and active education and community environment can be evaluated as a result of experimental efforts. Second, we can pay attention to the attempts to realize local communities. The bridge business is based on the multi-purposes such as early childhood education, technical education for adults, and community restoration of local residents and it reflects space and program plans for this purposes. It also reflects detailed plans such as differentiating the flow planning depending on users' time of use. Third, we can explain the characteristics of architectural planning considering local characteristics such as active use of local materials. Due to the characteristics of a developing country, there were significant considerations on maintenance, and to this end, the plan included plans for the environment and use of materials that are easily maintained. In addition, the participation of local residents in the process of establishment was suggested as a possibility to serve an educational role.

• Journal of the Korea Convergence Society
• /
• v.12 no.8
• /
• pp.93-104
• /
• 2021

In the process of the sustainable development of the world economy, the change and construction of urban living environment has always been the focus of people's attention. Therefore, the purpose of this study is to find out the potential safety hazards in residential areas, and put forward feasible improvement plans under the framework of CPTED theory.One is to collect the necessary literature. Secondly, according to the field investigation and questionnaire survey, sorting out the existing security risks. Finally, this paper puts forward the corresponding improvement and suggestion to this research. The conclusion is as follows: First, based on the six principles of CPTED theory, problems existing in Gamcheon Cultural Village, which is subject to research, were investigated. Second, six of the most serious safety issues (safety handle, landscaping, entrance control, signs, empty space, monitoring) were objectively analyzed, and designs were presented in terms of increasing safety stairs, installing automatic entrances, open access view, unifying signs, and building leisure areas.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.25 no.8
• /
• pp.1046-1052
• /
• 2021

Artificial intelligence is being applied in various industrial fields to the development of the fourth industry and the construction of high-performance computing environments. In the medical field, deep learning learning such as cancer, COVID-19, and bone age measurement was performed using medical images such as X-Ray, MRI, and PET and clinical data. In addition, ICT medical fusion technology is being researched by applying smart medical devices, IoT devices and deep learning algorithms. Among these techniques, medical image-based deep learning learning requires accurate finding of medical image biomarkers, minimal loss rate and high accuracy. Therefore, in this paper, we would like to compare and analyze the performance of the Cross-Entropy function used in the image classification algorithm of the loss function that derives the loss rate in the chest X-Ray image-based deep learning learning process.