• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.22 no.5
• /
• pp.218-222
• /
• 2012

FeNi alloy nanofibers have been prepared by an electrospinning process followed by air-calcination and H2 reduction to develop electromagnetic (EM) wave absorbers in the giga-hertz (GHz) frequency range. The thermal behavior and phase and morphology evolution in the synthetic processes were systematically investigated. Through the heat treatments of calcination and H2 reduction, as-spun PVP/FeNi precursor nanofiber has been stepwise transformed into nickel iron oxide and FeNi phases but the fibrous shape was maintained perfectly. The FeNi alloy nanofiber had the high aspect ratio and the average diameter of approximately 190 nm and primarily composed of FeNi nanocrystals with an average diameter of ~60 nm. The FeNi alloy nanofibers could be used for excellent EM wave absorbing materials in the GHz frequency range because the power loss of the FeNi nanofibers increased up to 20 GHz without a degradation and exhibited the superior EM wave absorption properties compared to commercial FeNi nanoparticles.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2011.10a
• /
• pp.136-142
• /
• 2011

The equations of motion for composite plates incorporating magneto-thermo-elastic effects have been derived via Hamilton's principle. In order to get the insight into the implications of a number of geometrical and physical features of the system, the vibrational responses of finite composite rectangular plates immersed in a transversal magnetic field are investigated by applying the extended Galerkin method. The vibration response characteristics of a composite plate are exploited in connection with the magnetic field intensity, thermal load, and electric conductivity of fibrous composite materials. Some pertinent conclusions, which highlight the various effects induced by the magneto-thermo-elastic couplings, are outlined.

• Applied Microscopy
• /
• v.25 no.1
• /
• pp.86-95
• /
• 1995

This study was accomplished to investigate the ultrastructure of mucous glands in dorsal skin of frog (Rana catesbeiana) by means of scanning and transmission electron microscopes. The dorsal skin of Rana catesbeiana is composed of epidermis and dermis. The cutaneous mucous glands consist of inner glandular epithelial cells and outer myoepithelial cells. Glandular epithelial cells are divided into four types by the microscopic ultrastructure; ER-rich cell, round secretory granule-containing cell, foam-like granule mass-containing cell, mitochondria-rich cell. Myoepithelial cell has a long elliptical nucleus and filled with fibrous materials in the cytoplasm. As a result of scanning microscopic observation, the surface of dorsal skin is covered with cutaneous protrusions. The opening sites of the mucous glands are irregularly distributed in dorsal skin.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1996.10a
• /
• pp.328-334
• /
• 1996

This report is the results of an experimental study on the relative effectiveness of different types of steel fiber in concrete. The fibers considered in the study were straight-indent and hooked-collated with aspect ratios of about 50~100. A fiber volume of 0~2 percent was used throughout this investigation. The fresh fibrous mixes were characterized by the slump and vebe-time, and the hardened materials by their compressive and flexural load-deflection relationships. Hooked fibers were found to be more effective than straight ones in improving the strength and energy absorption of concrete.

• Journal of the KSME
• /
• v.30 no.3
• /
• pp.246-251
• /
• 1990

마이크로폴라 탄성이론은 다른 마이크로연속체(microcontinuum) 이론에 비해 적용이 간단하며, 실제 많은 물리적인 현상을 규명하는 데 다양하게 이용할 수 있다. 특히 고전 탄성이론에 의해 적절하게 해결될 수 없는 덤벨(dumbell) 분자로 이루어진 물체, 액체 결정체(liquid crystals), 과립상(granular)의 분자로 구성된 물체와 복합 섬유재료(composite fibrous materials) 등은 마 이크로폴라 탄성이론에 의해 잘 해결될 수 있다. 또한 마이크로폴라 탄성이론은 고체 내에서의 파의 전파(propagation)와 분산(dispersion), 구멍 주위의 응력집중과 외부 하중을 받는 물체에 있어 균열끝에서의 응력 분포 등의 고체역학 문제들은 물론이고, 경계층(boundary layer), 난 류(turbulence), 유체 유동의 불안정(instability)과 표면장력 현상 등의 유체역학에서의 복잡한 문제들을 해결하는 데에도 이용할 수 있다. 마이크로폴라 탄성이론은 고전 탄성이론에 비해 상 대적으로 새롭고 미개척 분야이긴 하지만 이론의 기반이 확고하기 때문에 앞으로의 회전응력 측정장치의 개발을 통해 미소구조의 영향을 고려해야 하는 많은 문제들을 해결하는데 큰 기여를 할 것으로 전망된다.

• Structural Engineering and Mechanics
• /
• v.17 no.3_4
• /
• pp.347-356
• /
• 2004

In order to extend the lifetime of buildings and civil infrastructure, patch type fibrous composite retrofitting materials are widely used. Retrofitted concrete columns and beams gain stiffness and strength, but lose toughness and show brittle failure. Usually, the cracks in concrete structures are visible to the naked eye and the status of the structure in the life cycle is estimated through visual inspections. After retrofitting of the structure, crack visibility is blocked by retrofitted composite materials. Therefore, structural monitoring after retrofitting is indispensable and self diagnosis method with optical fiber sensors is very useful. In this paper, we try to detect the peel out effect and find the strain difference between the main structure and retrofitting patch material when they separate from each other. In the experiment, two fiber optic Bragg grating sensors are applied to the main concrete structure and the patching material separately at the same position. The sensors show coincident behaviors at the initial loading, but different behaviors after a certain load. The test results show the possibility of optical fiber sensor monitoring of beam structures retrofitted by the composite patches.

• Korean Journal of Materials Research
• /
• v.5 no.2
• /
• pp.215-222
• /
• 1995

Anisotropic pitch-based C-type and hollow carbon fibers can obtain wider shear stresses during the spinning and induce higher molecular orientation than that of round along the fiber axis. These fibers reinforced unidirectional epoxy composites were prepared by hot-press moulding method and perpendicular and parallel thermal conductivities of the composites were measured by a steady-state meth od. In the case of round carbon fibers reinforced epoxy composites(H-CF/EP), thermal anisotropic factor showed nearly 50, while those of H-CF/EP and C-CF/EP showed about 130 and 118, respectively. As a result, both H-CF/EP and C-CF/EP had an excellent directional thermal conductivity to distribute heat, above 200 %.

• Archives of Craniofacial Surgery
• /
• v.18 no.2
• /
• pp.137-140
• /
• 2017

Alloplastic materials used for orbital fracture reconstruction can induce complications, such as infection, migration, extrusion, intraorbital hemorrhage, and residual diplopia. Silicone is one of the alloplastic materials that has been widely used for decades. The author reports a rare case of spontaneous extrusion of a silicone implant that was used for orbital fracture reconstruction 30 years earlier. A 50-year-old man was admitted to the emergency room for an exposed substance in the lower eyelid area of the left eye, which began as a palpable hard nodule a week earlier. The exposed material was considered to be implant used for previous surgery. Under general anesthesia, the implant and parts of the fibrous capsule tissue were removed. Several factors hinder the diagnosis of implant extrusions that occur a long period after the surgery. So, surgeons must be aware that complications with implants can still arise several decades following orbital fracture reconstruction, even without specific causes.

• Restorative Dentistry and Endodontics
• /
• v.20 no.1
• /
• pp.17-32
• /
• 1995

The purpose of this study was to examine the response of periradicular tissues to amalgam, IRM, Ketac-silver and MTA(Mineral trioxide aggregate) used as a root end fillings. The lower third and fourth premolars of 5 mongrel dogs were used. Each root was resected, followed by root end fillings with experimental materials. The animals were sacrificed after 16 weeks and radiographic and histologic results were evaluated. The results were as follows : 1. Severe inflammation around apex and disruption of cortical were noted in relation to the amalgam. 2. With IRM, there was severe infiltration of inflammatory cells around filling material, but healing of cortical bone was noted. 3. With Ketac-silver, mild inflammation and thick band of fibrous connetive tissue around filling material were seen, with a cortical bone healing. 4. In case of MTA, complete regeneration of cortical bone was seen, and free MTA was surrounded with newly formed bone tissue.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.4 no.2
• /
• pp.127-138
• /
• 2002

The recent fashion trend of knit wear is now changing to the various fibrous color combination which emphasizes the plain texture. It supports the human body curvature which is influenced by the slim style of woven wear. In this research work, the general characteristics and knit wear fashion trend are studied. The metallic fiber and fancy yarn are used widely as fiber materials for knit in nowadays. However, the light and functional materials are preferred. The general characteristics of knit which gives the feeling of light and warm are still prevailing using pure wool, kid mohair, and mixed wool with polyester. In order to provide the soft touch feeling, smoothness of fine fiber, and feeling of sponge, several kinds of finishing techniques such as bulky, felting, bonding, and quilting process are usually adopted. The knit wear fashion trend is mainly consisted of the basic design items, and it gives the feeling of luxurious and elegance. The more youthful feeling is adapted for the general style of knit wear of the certain target age. The woven wear trend such as season color, line and pattern are applied in knit wear trend in recent days.