• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2001년도 추계학술발표회 초록집
• /
• pp.67-67
• /
• 2001

The structure zone model has been used to provide an overview of the relationship between the microstructure of the films deposited by PVD and the most prominent deposition condition.s. B.AMovchan and AV.Demchishin have proposed it firstls such model. They concluded that the general features of the resulting structures could be correlated into three zones depending on $T/T_m$. Here T m is the melting point of the coating material and T is the substrate temperature in kelvines. Zone 1 ($T/Tm_) is dominated by tapered macrograins with domed tops, zone 2 ($O.3) by columnar grains with denser boundaries and zone 3 ($T/T_m>O.5$) by equiaxed grains formed by recrystallization. J.AThomton has extended this model to include the effect of the sputtering gas pressure and found a fourth zone termed zone T(transition zone) consisting of a dense array of poorly defined fibrous grains. R.Messier found that the zone I-T boundary (fourth zone of Thorton) varies in a fashion similar to the film bias potential as a function of gas pressure. However, there has not nearly enough model for explaining the change in morphology with crystal orientation of the films. The structure zone model only provide an information about the morphology of the deposited film. In general, the nucleation and growth mechanism for granular and fine structure of the deposited films are very complex in an PVD technique because the morphology and orientation depend not only on the substrate temperature but also on the energy of deposition of the atoms or ions, the kinetic mechanism between metal atoms and argon or nitrogen gas, and even on the presence of impurities. In order to clarify these relationship, AI and Mg thin films were prepared on SPCC steel substrates by PVD techniques. The influence of gas pressures and bias voltages on their crystal orientation and morphology of the prepared films were investigated by SEM and XRD, respectively. And the effect of crystal orientation and morphology of the prepared films on corrosion resistance was estimated by measuring polarization curves in 3% NaCI solution.

• Asian-Australasian Journal of Animal Sciences
• /
• 제32권1호
• /
• pp.103-109
• /
• 2019

Objective: Ensiling of tannin-rich fruit byproducts (FB) involves quantitative and qualitative changes in the tannins, which would consequently change the rumen fermentation characteristics. This study aimed to evaluate whether ensiled FBs are effective in mitigating methane emission from ruminants by conducting in vitro assessments. Methods: Fruit byproducts (grape pomace, wild grape pomace, and persimmon skin) were collected and subjected to four-week ensiling by Lactobacillus buchneri inoculant. A defined feed component with or without FB samples (both fresh and ensiled material) were subjected to in vitro anaerobic culturing using rumen fluid sampled from beef cattle, and the fermentation parameters and microbial populations were monitored. Results: Reduced methane production and a proportional change in total volatile fatty acids (especially enhanced propionate proportion) was noted in bottles containing the FBs compared with that in the control (without FB). In addition, we found lower gene copy number of archaeal 16S rRNA and considerably higher levels of one of the major fibrolytic bacteria (Fibrobacter succinogenes) in the bottles containing FBs than in the control, particularly, when it was included in a forage-based feed. However, in the following cultivation experiment, we observed that FBs failed to exhibit a significant difference in methane production with or without polyethylene glycol, implying that tannins in the FBs may not be responsible for the mitigation of methane generation. Conclusion: The results of the in vitro cultivation experiments indicated that not only the composition but also ensiling of FBs affected rumen fermentation patterns and the degree of methane generation. This is primarily because of the compositional changes in the fibrous fraction during ensiling as well as the presence of readily fermented substrates, whereas tannins in these FBs seemed to have little effect on the ruminal fermentation kinetics.

• 대한방사선기술학회지:방사선기술과학
• /
• 제46권3호
• /
• pp.187-195
• /
• 2023

A shield was made by mixing materials such as bismuth(Bi) and barium(Ba) with silicon to evaluate its shielding ability. Bismuth was made into a shield by mixing a bismuth oxide(Bi₂O₃) colloidal solution and a silicon base and applied to a fibrous fabric, and barium was made by mixing lead oxide(PbO) and barium sulfate(BaSO₄) with a silicon curing agent and solidifying it to make a shield. The test was conducted according to the lead equivalent test method for X-ray protective products of the Korean Industrial Standard. The experiment was conducted by increasing the shielding body one by one from the test condition of 60 kVp, 200 mA, 0.1sec and 100 kVp, 200 mA, 0.1 sec. At 60 kVp, 2 lead oxide-barium sulfate shields, 2 bismuth oxide 1.5 mm shields, and 5 bismuth oxide 0.3 mm shields showed shielding ability equal to or higher than that of lead 0.5 mm. At 100 kVp, 2 lead oxide-barium sulfate shields and 2 bismuth oxide 1.5 mm shields showed shielding ability equal to or higher than that of lead 0.5 mm. It was confirmed that when using 2 pieces of lead oxide-barium sulfate and 1.5 mm of bismuth oxide, respectively, it has shielding ability equivalent to that of lead. Bismuth oxide and lead oxide-barium sulfate are lightweight and have excellent shielding ability, thus they have excellent properties to be used as an apron for radiation protection or other shielding materials.

• 암석학회지
• /
• 제22권3호
• /
• pp.219-233
• /
• 2013

부산광역시 동부의 장산화산암체는 화산함몰체로 알려져 있고, 화산함몰체 외각부를 따라 구과상 유문암이 $60^{\circ}{\sim}90^{\circ}$의 각도로 수직유상구조를 보여주며 환상암맥으로 나타난다. 구과의 직경은 수 mm에서 2.8 cm 이상이며, 평균적으로 5~10 mm로 측정되었다. 이들 구과는 하나의 핵을 중심으로 방사상을 나타내는 단식 구과형과 육안상 흰색을 띠는 각을 가지면서 핵 부분을 중심으로 방사상을 나타내는 방사상 단식 구과형으로 비교적 단순한 형태를 보여주며, 이들 구과들이 서로 인접하여 합체된 포도송이와 같은 집합체를 보여주기도 한다. 구과의 동심원상 핵 부분에 대한 전자현미분석 결과, 은미정질 기질부 물질의 성분은 주로 $SiO_2$가 거의 82% 이상, $Al_2O_3$는 7~10%, $Na_2O+K_2O$는 8% 이하의 실리카 물질과 장석(새니딘)의 미세한 섬유상 교생으로 나타났다. 구과에 대한 X-선 회절분석 결과, 석영, 새니딘, 앨바이트 그리고 소규모의 운모, 카오린, 녹니석으로 구성되며, X-선 면분석 결과, 핵 부분은 $SiO_2$가 풍부하며, 각 부분은 $Na_2O$ 또는 $K_2O$, $Al_2O_3$가 풍부하였다. 장산콜드론의 유문암 암맥에서 나타나는 구과의 깃털형과 비등형 결정 형태는 마그마 관입에 의한 이동속도보다 유리질 물질로부터 탈유리화작용이 더 빠른 속도로 진행되었고, 비교적 정체된 상태에서 급속한 냉각으로 형성되었음을 지시한다. 구과들은 고규산(75.4~75.7 wt.%) 유문암질 마그마로부터 유래되었다.

• 대한치과보철학회지
• /
• 제22권1호
• /
• pp.33-50
• /
• 1984

The purpose of this study was to investigate whether the ashed tooth powder is utilized as an alternative material of the implant to recovery the bony defect. For this purpose its biocompatibility was evaluated comparing to the synthetic calcium phosphate compounds, such as Syntograft and Calcitite, as well as the vacuum firing porcelain (Ceramco Inc.) which is anticipated to use as a matrix to aid sintering. Bony defects to exposure the bone marrow, $3{\times}5$ mm in size, were created in the right and left tibias of fifteen rabbits, and then the ashed tooth powder at $950^{\circ}C$, the porcelain powder, Syhtograft and Calcitite were inserted in the defects of twelve rabbits of the experimental group and the blood clot only was filled in the defects of three rabbits of the control group. The experimental and control rabbits were sacrificed at 1st, 2nd 3rd week after implantation and the histologic examination was performed. The ashed tooth powder in order to make the needed form of the implant was molded using the cylindrical mold 1 cm high, 1 cm in diameter under the pressure of $1000kg/cm^2$ and the ashed tooth powder was sintered at $1100^{\circ}C$ for 1 hour and the mixture of the porcelain powder and the ashed tooth powder at the weight ratio of 7:3, 6:4, 5:5, 4:6 were molded in the same manner and were sintered at $925^{\circ}C$. From this sintered material, square shaped implants were prepared in the dimension of $2{\times}4{\times}6mm$. The prepared implants were surgically placed in the subperiosteum of lateral surfaces of the right and left mandibular bodies. The dogs were sacrificed at 4 weeks, and then the specimens were examined using the light and scanning electron microscopes. The results of this study were obtained as follows: 1. Any inflammatory response was not noted after implanting of the ashed tooth powder, Syntograft, Calcitite and the porcelain powder during the whole experimental period after implantation. 2. Induction of the new bone formation was significantly shown in the ashed tooth powder, Syntograft and Calcitite. 3. The more the porcelain powder was contained in the implants, the more the porosity was and the bigger the pore size was under the scanning electron microscope. And there was ingrowing of the fibrous connective and the osteoid tissue. 4. The osteoid tissues were found to be directly fused to the implant of the ashed tooth powder, and the mixture implant of the porcelain powder and the ashed tooth powder at the weight ratio of 4:6 under the light and scanning electron microscopes.

• 한국임상수의학회지
• /
• 제32권5호
• /
• pp.410-416
• /
• 2015

골대체제는 지연유합이나 유합부전 그리고 골절술과 관절고정술 시 골편의 연속성 확립이 필요한 경우 골절의 주요 결손부위를 채우는데 주로 활용되고 있다. 본 연구에서는 오적골의 다양한 전처리 후 직경 5 mm 두께 2 mm의 형태로 가공하여 rhBMP-2의 담체로써 골전도력과 골유도력을 평가하고자 하였다. 결합조직의 두께는 2, 4주차 모두 오적골유래 hydroxyapatite 적용군(CBHA)에서 가장 유의성 있게 얇았다(p < 0.05). Radiologic gray-level histogram의 측정에서는 4주차에서 CBHA군이 산호유래 hydroxyapatite 적용군(CHA)군보다 유의성 있게 높게 나타났으며(p < 0.05), 12주차에서는 CHA군의 변화율이 가장 적었다. 전체 12주 동안의 변화율에서는 CBHA가 가장 많은 변화를 보였다. 폐쇄율에 있어서는 4, 8, 12주차 모두 CHA군이 다른 군에 비해 유의성 있게 높게 나타났으며(p < 0.05), 8주차에서는 bmp를 적용한 오적골 적용군(CB1bmp)이 CBHA군보다 유의성 있게 높게 나타났다(p < 0.05). 이상의 결과들은 CBHA가 생체 내에 적용하는 골대체재로서 골유도능력이 우수한 것으로 나타났다. 따라서 CBHA는 편평골에 있어 생체적 합성이 뛰어난 골대체재로 그 가치가 있는 것으로 생각되며, 수의 임상에 있어서 활용성이 매우 높을 것으로 사료된다.

• 한국응용과학기술학회지
• /
• 제37권4호
• /
• pp.830-838
• /
• 2020

본 연구는 MIA로 퇴행성관절염을 유도한 랫드에 방사선 형질전환 차조기가 골 대사 및 염증 반응에 미치는 효과를 평가하였다. 방사선 형질전환 차조기를 2주 동안 25, 50, 100 mg/kg/day의 용량으로 경구 투여하고 랫드의 우측 관절 내 공간에 MIA를 주입하였다. 이후 동일한 용량을 4주 동안 지속 투여하였다. 혈청 바이오마커와 무릎 관절 분석의 형태학 및 조직병리학적 분석에 기초한 치료 효과를 평가하였다. 대조군 랫드와 비교하였을 때 방사선 형질전환 차조기는 혈청 내 염증 및 골 대사 마커(COX-2, LTB4, MMP-3, COMP)의 생성량을 유의하게 감소시켰다. 이와는 다르게 TIMP-1 및 calcitonin의 생성이 크게 증가하였다. 또한, 방사선 형질전환 차조기는 무릎 연골과 활막을 효과적으로 보존하였다. 그 결과, 방사선 형질전환 차조기는 퇴행성관절염 증상을 예방하고 완화였다. 따라서, 방사선 형질전환 차조기는 퇴행성관절염 관리를 위한 식·의약품 소재로 사용될 수 있다.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제17권1호
• /
• pp.60-72
• /
• 1995

Temporomandibular joint ankylosis is the movemental obstacle of mandible which depend on proliferation of bony or fibrous tissue in temporomandibular joint structure by various causes. In order to treat this, various surgical methods have been performed, but no operative methods have been produced consistently successful results. This research has been performed to the patients who had been operated due to temporomandibular joint ankylosis by studying classification, cause, onset, duration, anesthesia and treatment method, symptom, change of mouth opening, complication through medical record, X-ray, follow-up for being a help to proper selection of treatment method and evaluation of prognosis. The author obtained the following results by analyzing 44 cases among patients who had been operated due to temporomandibular joint ankylosis during 8 year hospitalization from 1986 to 1993 in Dept. of Oral & Maxillofacial Surgery of Seoul National University Hospital. 1. The occurrence was in the order of below 10, 20's, 10's, 30's. The average of occurrence was 12.95. Illness period was 50.0% within 10 years and 50% beyond 10 years. The average period of illness was 13.33 years. 2. Trauma occupied 54.5% of causes and inflammation occupied 45.5%. Men had more occurrences due to trauma and there was no difference in case of inflammation. 3. In nasotracheal intubations for general anesthesia, the cases of using fiberoptic laryngoscope occupied 40.9%, direct or blind nasotracheal intubation occupied 40.9% and the cases of using tracheostomy occupied 18.2%. 4. In operative approaching methods, submandibular & preauricular approach were mainly applied, and in operative methods, high condylectomy(Group I) occupied 11.4%, arthroplasty without interpositional material following condylectomy or gap ostectomy(Group II) occupied 11.4%, with interpositional material following high condylectomy (Group III) occupied 40.9%, and using condylar reconstruction following condylectomy or gap ostectomy(Group IV) occupied 36.6%. 5. In change of mouth opening reformed after surgery, Group III showed the best result of average 23.5mm, Group IV showed 16.3mm, Group I showed 14.9mm and Group II showed 10.2mm of reformation. Summarizing the results as written above, it is considered that early treatment is important as soon as possible in Temporomandibular joint ankylosis. It is recommended in surgical method what can lead to postoperative early movement maintaining anatomaical & functional form, and then the development of various surgical methods will be requested.

• 에너지공학
• /
• 제26권4호
• /
• pp.84-91
• /
• 2017

섬유강화플라스틱(glass fiber reinforced plastics)은 수지에 섬유상의 보강재를 복합화하여 고강도 특성을 나타내게한 대표적인 플라스틱 복합소재이다. 섬유강화플라스틱 성형제품의 기계적 물성을 결정하는 요소는 강화재로 사용되는 섬유상 소재이므로 섬유소재에 대한 연구는 관심이 높은 대상이나, 기지재를 구성하는 수지의 물성에 영향을 미치는 충진재의 영향에 관한 연구는 많지 않은 편이다. 그러나, 플라스틱 또는 수지 조성물의 물성은 미네랄 충진재에 의하여 결정되며, 기지재가 복합소재에 미치는 영향이 높은 만큼 본 연구에서는 $3-6{\mu}m$ 크기의 중질 탄산칼슘을 사용하여 충진재의 크기와 첨가량이 섬유강화복합체에 미치는 영향을 확인하고자 하였다. 시편은 시트몰딩 컴파운드(SMC, Sheet molding compound) 방법에 의하여 제조되었으며, 기계적 특성은 굴곡강도와 인장강도 결과를 비교 분석 하였다. 그 결과 탄산칼슘의 크기 또는 첨가량이 성형시편의 기계적 강도에 영향을 미칠 수 있음을 확인할 수 있었으며, 그 중에서도 가장 낮은 평균 입경 ($2.8{\mu}m$) 조건에서 가장 높은 기계적 특성을 나타냈다.

• Journal of Periodontal and Implant Science
• /
• 제32권4호
• /
• pp.753-767
• /
• 2002

The purpose of this study was to evaluate histologically the effect of LiF-maleic acid added calcium aluminate(LM-CA) bone cement & CA-PMMA composite bone cement on the healing of calvarial defect in Sprague-Dawley rats. The critical size defects were surgically produced in the calvarial bone using the 8mm trephine bur. The rats were divided in three groups : In the control group, nothing was applied into the defect of each rat. LM-CA bone cement was implanted in the experimental group 1 and CA-PMMA composite bone cement was implanted in the experimental group 2. Rats were sacrificed at 2, 8 weeks after surgical procedure. The specimens were examined by histologic analysis, especially about the bone-cement interface and the response of surrounding tissue. The results are as follows; 1. In the control group, inflammatory infiltration was observed at 2 weeks. At 8 weeks, periosteum and duramater were continuously joined together in the defect area. But the center of defect area was filled up with the loose connective tissue. 2. In the experimental group 1, the bonding between implanted bone cement and the existing bone was seen, which more increased in 8 weeks than 2 weeks. Inflammatory infiltration and the dispersion of implanted bone cement particles were seen in both 2 weeks and 8 weeks. 3. In the experimental group 2, implanted bone itself had a dimensional stability and no bonding between implanted bone cement and the existing bone was seen in both 2 weeks and 8 weeks. Implanted bone cement was encapsulated by fibrous connective tissue. In addition, inflammatory infiltration was seen around implanted bone cement. On the basis of these results, when LM-CA bone cement or CA-PMMA composite bone cement was implanted in rat calvarial defect, LM-CA bone cement can be used as a bioactive bone graft material due to ability of bonding to the existing bone and CA-PMMA can be used as a graft material for augmentation of bone-volume due to dimensional stability.