• Asian-Australasian Journal of Animal Sciences
• /
• v.14 no.10
• /
• pp.1400-1404
• /
• 2001

$Holstein\;{\times}\;indigenous$ multiparous dairy cows were offered diets with increasing roughage neutral detergent fiber (NDF) contents to determine the effects on intake, milk yield and compositions. Roughage NDF contents were 15, 18, 21 and 24% dry matter (DM), and concentrate NDF content was 10% DM. Experimental treatments were isonitrogenous and isocaloric diets. Maximum and minimum temperature humidity index during the experimental period were 85.9 and 76, respectively. Intakes of DM, crude protein and net energy, 4% fat corrected milk, milk protein and average daily gain decreased with increasing roughage NDF contents (p<0.05). Intakes of ether extract (p<0.01) and dietary NDF (p>0.05) and milk fat (p<0.01) increased with increasing roughage NDF contents. The results support the conclusion that higher DM intake, optimal milk yield and compositions can be maintained with lower roughage NDF diets for dairy cows under tropical conditions.

• Journal of the Korean Home Economics Association
• /
• v.30 no.1
• /
• pp.1-9
• /
• 1992

Graft polymerization mechanism and rate of polymerization of MMA and MMA/4-VP onto cellulose fiber using Ce(IV) salt as an initiatior were investigated. It was shown that the concentration of Ce(IV) salt affected on the graft yield, graft efficiency, total conversion and the rate of graft polymerization. The graft yield and total cenversion for MMA grafted polymer were significantly higher than those for MMA/4-VP grafted polymer with variation of CAN concentration. In this system the oxidative termination by Ce(IV) salt was considered particularly in higher concentration Ce(IV) ion. The change in the mode of termination reactions with variation of CAN concentration made possible the presence of an optimum Ce(IV) ion concentration for maximum graft yield.

• Carbon letters
• /
• v.18
• /
• pp.56-61
• /
• 2016

Cellulose fibers were stabilized by treatment with an electron-beam (E-beam). The properties of the stabilized fibers were analyzed by scanning electron microscopy, Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy, and thermogravimetric analysis. The E-beam-stabilized cellulose fibers were carbonized in N₂ gas at 800℃ for 1 h, and their carbonization yields were measured. The structure of the cellulose fibers was determined to have changed to hemicellulose and cross-linked cellulose as a result of the E-beam stabilization. The hemicellulose decreased the initial decomposition temperature, and the cross-linked bonds increased the carbonization yield of the cellulose fibers. Increasing the absorbed E-beam dose to 1500 kGy increased the carbonization yield of the cellulose-based carbon fiber by 27.5% upon exposure compared to untreated cellulose fibers.

• Asian-Australasian Journal of Animal Sciences
• /
• v.13 no.7
• /
• pp.929-934
• /
• 2000

Optimum stand density of alfalfa (Medicago sativa L.) varies with locations and climates. Stand density is one of the factors that determines herbage yield, forage quality and persistence of alfalfa. As establishment costs increase, the question arises whether present population densities are optimum for obtaining maximum herbage yield and forage quality. The objectives of this study were: 1) to determine the optimum plant density for highest herbage yield and forage quality for the dehydrated alfalfa industry under Edmontons climatic conditions in Alberta, Canada; 2) to compare herbage yield and forage quality of the cultivars 'Algonquin' and 'Vernal' grown at a range of stand densities. Alfalfa seedlings of both cultivars were either transplanted at spacings of 6, 10, 15 and 25 cm or direct seeded at the 4.5 cm plant spacings, providing population densities of 494, 278, 100, 45 and $16plants/m^2$. The experimental design was a randomized complete block with a split-plot arrangement having three replicates; the main plots consisted of two alfalfa cultivars Algonquin and Vernal, and the sub-plots were the five population densities. The cultivar Vernal had significantly higher annual yield than did the cultivar Algonquin. There was no significant effect of plant density on herbage yield. There was no difference in crude protein (CP) between the two cultivars. At the first cut, there was a significant quadratic effect of plant density on CP content and the greatest CP occurred at the 100 plants/m2 density. Crude protein was not affected by plant density at the second cut. Acid detergent fiber (ADF) and neutral detergent fiber (NDF) were not affected by plant density. The cultivar Algonquin usually had a lower ADF and NDF than cultivar Vernal. In conclusion, high population densities ($278plants/m^2$ or more) of alfalfa did not improve herbage yield and forage quality compared with low plant population densities ($100plants/m^2$ or less) of alfalfa.

• Proceedings of the Korean Society of Agricultural Engineers Conference
• /
• 1998.10a
• /
• pp.431-437
• /
• 1998

This study was performed to ascertain the three-dimensional effect of the crack reduction and the restrained effect of crack growth, and to yield a suitable mixing ratio of the synthetic fiber reinforced soil. The results of the study are as follows ; 1) The synthetic fiber has the resisting force for crack because of the adhesion due to the attraction of soil particles. 2) As the synthetic fiber length and the mixing ratio are increased, mono filament synthetic fiber reinforced soil is increased the effects of crack reduction and the restraint of crack growth. 3) The fibrillated synthetic fiber is more effective than mono filament synthetic fiber for crack. 4) A suitable mixing ratio of synthetic fiber reinforced soil is 0.5% of the fibrillated synthetic fiber.

• Preventive Nutrition and Food Science
• /
• v.19 no.2
• /
• pp.124-127
• /
• 2014

The effect of feed moisture contents (30%, 40%, and 50%) and screw speed (200 rpm, 250 rpm, and 300 rpm) on the corn fiber gum (CFG) yield and soluble arabinoxylans (SAX) content of destarched corn fiber was investigated. The CFG yields and SAX contents of extruded, destarched corn fiber were higher than that of destarched corn fiber. In extruded, destarched corn fiber, increased screw speed and decreased feed moisture contents resulted in a higher SAX contents. The maximum yields of CFG obtained from extruded, destarched corn fiber were $79.1{\pm}19.0g/kg$ (30% feed moisture content) and $82.3{\pm}11.30g/kg$ (300 rpm screw speed). The highest SAX content was also observed at a screw speed of 300 rpm. The results of the present study show that water extraction and extrusion combined have the potential to increase CFG and SAX yields from corn fiber.

• Fibers and Polymers
• /
• v.2 no.4
• /
• pp.178-183
• /
• 2001

A pitch precursor for a general purpose carbon fiber was prepared by condensation of pyrolized fuel oil (petroleum residual oil) with bromine under nitrogen blowing. such a condensation raised the softening point of the pitch from 4$0^{\circ}C$ to $265^{\circ}$ with a yield of 43%. The pitch precurosr showed an enhanced aromaticity and enlarged molecular size, which led to a reduction in molecular mobility and optical isotropy. The precursor was spun into fibers of $20\mu\textrm{m}$ diameter at a take-up speed of 700m/min. The fiber was stepwise stabilized in air and carbonized in Ar gas to obtain an isotropic carbon fiber. The carbon fiber exhibited tensile strengths of 500-800 ㎫though the fiber was formed via a crude method. The electric conductivity of the carbon fiber was relatively high, 2.2$\times$$10^2$S/cm, sufficient to be used as electrode materials.

• Journal of the Korea Furniture Society
• /
• v.17 no.1
• /
• pp.63-71
• /
• 2006

This study was carried out to resplace traditional virgin wood fiber by recycled MDF-waste fiber for the manufacture of high density fiberboard. For the recycling, MDF waste was disintegrated for 10 minutes and beaten for 15 minutes. There was no difference in formaldehyde emission by desiccator method between virgin wood fiber and disintergrated and beaten MDF-waste fiber. Fiberboard which was maded from 100% of disintergrated and beaten MDF-waste fiber showed similar physical and mechanical properties to those of virgin fiber. The yield of recycled fiber from MDF waste was 85%.

• Korean Journal of Food Science and Technology
• /
• v.10 no.2
• /
• pp.109-111
• /
• 1978

Three kinds of domestic summer grains, barley, naked-barley & wheat were used for the assessment of ash, protein, fat, crude fiber, calcium, iron & thiamine contents in the grain-pearling and flour-milling processes at the 60%, 70%, 80%, 90% yield bases and the following results were obtained. 1) Ash, protein, fat, crude fiber, calcium, iron & thiamine contents of milled grains were proportional to the milling yield in grain-pearling and flour-milling processes. 2) In the case of pearled barley, the average content of ash was 0.83%, protein was 1.31%, fat was 0.40%, crude fiber was 0.75%, calcium was 3.03mg%, iron was 2.40mg% and thiamine was 0.14% lower than the barley flour at the same level of milling yield. 3) In the case of pearled naked-barley, the average content of ash was 0.41%, protein was 1.96%, fat was is 0.33%, crude fiber was 0.84%, calcium was 4.54mg%, iron was 1.19mg% and thiamine was 0.10mg% lower than the naked-barley flour at the same level of milling yield. 4) In the case of pearled wheat, the average content of ash was 0.28%, protein was 2.25%, fat was 0.05%, crude fiber was 0.25%, calcium was 4.31mg%, iron was 0.12mg% and thiamine was 0.15mg% higher than the wheat flour at the same level of milling yield.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.33 no.2
• /
• pp.169-173
• /
• 1988

In order to find out the optimum seeding date of flax. this study was investigated ecological characters, yield components and yield of five varieties(Wiera, Taijungsun ＃$^1$, Storment Goss, CI 1763, 99403-Fiber). As seeding date was delayed, the maturing date was delayed also and stem length was longest in March 10 seeding but it grew short in the late seeding. Oil content was increased most in March 10 seeding, that is, increased to 34% in Taijungsun ＃$^1$, 32% in storment Goss, 30% in Wiera and 26% in 99403-Fiber, and it was decreased in the late seeding. Stem yield and seed yield were heaviest in March 10 seeding, and it was light in the late seeding, Judging from the results reported above. in optimum seeding date of flax seemed to be before the March 10.