• 펄프종이기술
• /
• 제34권2호
• /
• pp.61-66
• /
• 2002

This study was carried out to investigate sheet properties of Indian mallow hanji, made by different pulping methods such as alkali and sulfomethylated pulpings, and different stock compositions, various mixing ratios of bast fiber and woody core fibers. Effect of morphological properties of pulp stocks on the sheet formation and their optical properties were also evaluated using an image analyzer and confocal laser scanning microscope(CLSM). In addition, the effect of fiber distribution index(FDI), which was calculated based on the image in a z-direction of a sheet from CLSM, on the sheet properties of Indian mallow hanji was discussed. The proposed FDI had a good correlation with various properties of paper, such as apparent density, opacity, tear index, breaking length and zero-span tensile strength. Especially, sulfomethylated pulp sheets＇FDI was higher than alkali pulp sheets.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1996년도 가을 학술발표회 논문집
• /
• pp.526-531
• /
• 1996

Most of existing tunnels in Korea have structural and material defects, such as lack of the thickness in the crown and presence of an opening behind thie lining as a result of its construction. In Japan, it is said that carbon fiver sheet is very attractive for the upgrading damaged tunnel due to its good tensile strength, handability and resistance to corrosion. This report is the summary of the applicability of continous carbon fiber sheet for a repair and reiforcement of existing tummel located in Masan. It is the aim of this study to analyze the site data related to consturcion method used carbon fiber sheet.

• 콘크리트학회지
• /
• 제11권2호
• /
• pp.167-175
• /
• 1999

현재 국내에는 지난 35년간 프리스트레스트 콘크리트보를 이용한 합성형 교량이 매우 널리 건설, 사용되어 왔으나, 교통량의 증가와 차량하중의 증가로 노후화가 점차 가속화되고 있는 형편이다. 본 연구에서는 유리섬유를 이용하여 손상된 프리스트레스트 콘크리트 교량을 보강하는 방법의 효과를 평가하기 위하여 무보강 표준시험체와 선행 하중의 재하로 균열이 발생한 8개의 시험체에 대하여 유리섬유 보강, 외부강선 보강 및 두가지 보강 방법을 병행한 보강을 실시하여 각 보강방법의 효과를 비교, 분석하였다. 실험결과, 최대하중은 외부강선 보강 시험체와 유리섬유 보강 시험체가 모두 거의 유사한 정도의 보강효과를 발휘함으로써 유리섬유 보강공법이 손상된 프리스트레스트 콘크리트 교량의 보강에 적용될 수 있는 것으로 판명되었다. 외부강선 보강공법에서의 가장 큰 문제가 단부의 정착장치인 것과 마찬가지로 유리섬유 보강 공법의 경우에도 최대하중에 도달하기 이전에 보강재의 부착이 파괴되지 않도록 적절한 방법을 선정하는 것이 매우 중요하며, 본 연구에서 검증된 두가지 방법이 단부의 정착기능을 충분히 발휘하는 것으로 판명되어, 이들 방법들이 적절히 사용될 경우에는 설계된 내하력의 증가를 기대할 수 있는 것으로 나타났다.

• 한국건축시공학회지
• /
• 제8권5호
• /
• pp.43-51
• /
• 2008

This study examines shear capacity performance and structural characteristics of reinforced concrete beam using carbon fiber sheet(CFS), g)ass fiber sheet(GFS), glass fiber steel plate(GSP) and carbon fiber bar CB) which are reinforcing materials for reinforced concrete beam in order to produce similar condition to repair and reinforce actual structure and aims to provide data available In designing and constructing reinforced concrete structures under the structural damage. This study obtains the following conclusions. After considering the shear experiment results. it was indicated that the CB reinforced test object was the best in the shear capacity improvement and ductility capacity as it was contained in the concrete and was all operated, Also, GFS reinforced test object indicated the reduced flexural capacity but good shear capacity. GSP reinforced test object had bigger reinforcing strength than other reinforcing test objects. On the other hand, it showed the lowest reinforcement effect as compared section thickness of reinforced material because it showed the bigger relativity a section thickness of reinforced material. If the adherence to the concrete is improved, it will seem to show bigger reinforcement effect.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1999년도 봄 학술발표회 논문집(I)
• /
• pp.840-845
• /
• 1999

In this study, it was experimentally investigated the effectiveness of repair and strengthening methods for RC beams deteriorated under severs enviromental conditions. Polymer cement were employed to restore the sectional loss and aramid fiber-reinforced sheet was used to reinforce the surface subject to tension. Repaired and strengthened reinforced-concrete samples were subjected to loading tests. The tests revealed that the sectional restoration enhanced the loading capability of the sample structures. Additional strengthening with one aramid fiber-reinforced sheet improved 18% of yielding load and 30% of ultimate load of the structure. Reinforcing with two aramid fiber-reinforced sheets brought about an enhancement of 22% of yielding loading and 49% of ultimate load.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1997년도 가을 학술발표회 논문집
• /
• pp.450-455
• /
• 1997

In recent years the research and development about the new material proceeds rapidly and actively in building industry. We are concerned with high-strength concrete as a new material. As the building structure becomes bigger, higher and more specialized, so does the demand of material and member with high strength for building expands greatly. In the future, we will quite need to research repair and rehabilitation to make high strength concrete structural building for our safe. So, I did an study on carbon fiber sheet rehabilitation(CFSR) of reinforced high strength concrete beams. The carbon fiber reinforced plastic(CFRP) bonding method is widely used for reinforcing the existing concrete structure among the various methods. The test results indicate that CFS is very effective for strengthening the damaged beams and controlling deflections of the repaired beams. When carbon fiber sheet rehabilitation of reinforced high strength concrete beams happened diagonal crack, the increase in the number of CFS layer didn't effect the increase in strength of beams. Also, by changing the CFS stick position gave diversified ultimate load in CFSR beams.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2005년도 봄학술 발표회 논문집(I)
• /
• pp.503-506
• /
• 2005

The purpose of this study was the Development of Retrofit Method for Beam Using Steel Plate Reinforced by Fiber Sheet.1. Additional reinforcements are not needed in the joining area of slab and beam web.2. Beam using carbon fiber reinforced plastic displays low effects in shearing effect.3. Beams reinforced steel plate by epoxy effect the capacities of strength. But the capacities of strength are rapidly reduced when adhesive surface be omitted. Thus details are needed in this case.4.Retrofit method for beam using steel plate reinforced by fiber sheet with epoxy rosin improves the capacities of strength and the initial stiffness, shows a large transformation since the maximum load likewise may be excellent to the shearing reinforcement.

• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 2006년도 학술발표회 논문집
• /
• pp.159-167
• /
• 2006

Every structure has the expected life span of its own and it has to be rebuilt. New buildings were preferred and put value a quantitative spread of apartment houses because of the rapid growth of national economy. Therefore, the apartment houses were not taken into consideration about maintenances. Carbon fiber sheet is widely used to strengthen old structural members but it is very rarely applied to a construction field for apartment houses. The purpose of this study is to develop effective strengthening methods for reinforced concrete columns using carbon fiber sheets. Eight reinforced concrete column specimens confined by carbon fiber sheet of uniaxial direction were tested using 10,000kN universal testing machine (UTM).

• Journal of the Optical Society of Korea
• /
• 제18권3호
• /
• pp.251-255
• /
• 2014

A fiber diffuser sheet based on poly (ethylene naphthalate) (PEN) and poly (methylpentene) (PMP) has shown potential for liquid crystal display backlight units, but these materials have an interfacial adhesion problem. To improve the interfacial adhesion between the fibers and matrix components, we have proposed the use of amorphous poly (cyclohexane-1,4-dimethylene terephthalate) (Tritan) instead of PEN. Furthermore, the fabrication processes have been optimized and simplified to improve the optical and mechanical properties of the sheet. As a result, the most effective fiber content for achieving the best haze characteristics of a sample consisting of Tritan and PMP has been identified.

• 대한기계학회논문집A
• /
• 제38권8호
• /
• pp.849-855
• /
• 2014

유리섬유강화 플라스틱 복합재료의 압축성형 시, 모재와 유리섬유의 분리 없이 유동성이 우수하고, 불균질한 섬유배향이 없는 GFRP 복합재료 개발에 관한 체계적인 연구결과는 미흡한 실정이다. GFRP 복합재료를 사용하여, 자동차 부품 성형 시 발생하는 불균질도와 섬유배향 발생을 억제하는 많은 연구를 해왔으나 아직 해결되고 있지 않다. 본 연구에서는 위의 문제점들을 해결하기 위해 섬유유동성이 뛰어나고, 섬유배향이 발생하지 않고, 불균질성이 없으며, 구조안정성, 함침도, 기계적 특성 및 재활용성 등이 우수한 유리섬유강화 플라스틱 프리프레그를 제조하여, 수직교차형 평직직조방법을 적용하여, GFRP(Glass Fiber Reinforced Plastic) Sheet 를 제조한다.