• International Journal of Concrete Structures and Materials
• /
• 제10권1호
• /
• pp.75-85
• /
• 2016

Fire ranks high among the potential risks faced by most buildings and structures. A full understanding of temperature effects on fiber reinforced concrete is still lacking. This investigation focuses on the study of the residual compressive strength, stress strain behavior and surface cracking of structural polypropylene fiber-reinforced concrete subjected to temperatures up to $300^{\circ}C$. A total of 48 cubes was cast with different fiber dosages and tested under compression after exposing to different temperatures. Concrete cubes with varying macro (structural) fiber dosages were exposed to different temperatures and tested to observe the stress-strain behavior. Digital image correlation, an advanced non-contacting method was used for measuring the strain. Trends in the relative residual strengths with respect to different fiber dosages indicate an improvement up to 15 % in the ultimate compressive strengths at all exposure temperatures. The stress-strain curves show an improvement in post peak behavior with increasing fiber dosage at all exposure temperatures considered in this study.

• 한국초지조사료학회지
• /
• 제10권3호
• /
• pp.137-140
• /
• 1990

본 연구는 山地草地에 있어서 사경方向과 海技標高가 牧草의 乾物生塵量과 品質에 미치는 影響을 究明 하고자 1986년부터 1987년까지 2년간 수행되었다. 1. 山地草地에 있어서 順料方向에 의한 orchardgrass의 乾物生塵量과 租蛋白質 含量은 北料面아 南料面보다 높았고, 南北 t 兩料面 모두 標高가 높아짐에 따라서 乾物生塵量과 組蛋白質 含量이 增加하였다. 2. Neutral detergent fiber(NDF), acid detergent fiber(ADF) 含量 및 in vitro 乾物消化率은 碩料方向間(南, 北) 그리고 標高間(250m, 350m, 500m)에 差異가 나타나지 않았다.

• 한국산업보건학회지
• /
• 제26권2호
• /
• pp.219-224
• /
• 2016

Objectives: Lung cancer occurred with worker working in an urban bus garage. A survey was conducted to investigate whether lung cancer had causal relationship with work. Exposure to asbestos and diesel engine exhaust were suspected. Methods: Airborne asbestos was sampled on membrane filter and analyzed using phase-contrast microscopy. Airborne diesel exhaust was sampled using quartz filter and analyzed with thermal-optical analyzer. Polynuclear aromatic hydrocarbons was sampled using PTFE filter and XAD-2 tube and analyzed with gas chromatography-mass selective detector. Results: Airborne asbestos concentration was under 0.01 fiber/cc. Worker who warmed up an engine of urban bus for 2 hours was exposed to elemental carbon concentration, $15.5{\mu}g/m^3$. Only naphtalene among polynuclear aromatic hydrocarbons was detected. Conclusions: It was difficult to conclude about worker exposure to asbestos because working hour related asbestos was too short. In reviewing papers, the exposure to asbestos over 0.01 fiber/cc during exchange brake lining was found. It was identified that worker's occupational exposure to diesel exhaust based on elemental carbon was higher than the other occupational exposure to diesel exhaust.

• Computers and Concrete
• /
• 제24권1호
• /
• pp.63-71
• /
• 2019

Thermal energy from high temperatures can cause concrete damage, including mechanical and chemical degradation. In view of this, the residual mechanical properties of high-strength fiber reinforced concrete with a design strength of 75 MPa exposed to $400-800^{\circ}C$ were investigated in this study. The test results show that the average residual compressive strength of high-strength fiber reinforced concrete after being exposed to $400-800^{\circ}C$ was 88%, 69%, and 23% of roomtemperature strength, respectively. In addition, the benefit of steel fibers on the residual compressive strength of concrete was limited, but polypropylene fibers can help to maintain the residual compressive strength and flexural strength of concrete after exposure to $400-600^{\circ}C$. Further, the load-deflection curve of specimen containing steel fibers exposed to $400-800^{\circ}C$ had a better fracture toughness.

• Composites Research
• /
• 제22권5호
• /
• pp.37-42
• /
• 2009

온도, 수분 및 자외선과 같은 자연환경을 모사할 수 있는 가속노화시험장치를 적용하여 복합적인 환경인자에 노출된 탄소섬유/에폭시 복합재의 열분석 특성과 화학구조분석을 수행하였다. 복합적인 환경인자의 최대 노출시간은 3000시간으로 노출시간에 따른 복합재의 열분석 특성과 화학구조는 Modulated DSE와 FTIR을 통해 조사하였다. Modulated DSC 시험을 통한 연우-결과에 따르면 노출시간이 증가할수록 복합재 내에 치밀한 망사 구조가 형성되어 유리전이온도는 증가함을 알 수 있었다. 또한 노출시간이 증가할수록 복합재의 특성에 영향을 미치는 물리시효가 발생하여 엔탈피 완화현상을 나타내는 흡열 피크가 관찰되었다. 아울러 FTIR 시험을 통해 관찰된 피크의 위치는 노출시간에 큰 영향을 받지 않지만 피크의 세기는 노출시간이 증가할수록 에폭시기에 발생되는 경화 반응으로 인해 점차 감소함을 알 수 있었다.

• Preventive Nutrition and Food Science
• /
• 제3권2호
• /
• pp.193-197
• /
• 1998

This study was conducted to determine if dietary fiber would reduce exposure of the tissues to dietary benzo[a]pyrene(BP) , a well-known carcinogenic polycyclic aromatic hydrocarbon, as evaluated by benzo[a]pyrene hydroxylase (BPH) activity. The effects of three different sources of dietary fiber(pectin, polydextrose, and clellulose) on BPH activity were studied using Sprague-Dawley rats. In this study, male rats were fed a fiber-free purified diet for 7 days, whereupon they were switched to experimentla diets for 48h. After 48h, their liver, stomach , small intestinal mucosa and large intestinal mucosa were assayed for BPH activity. Thissues exposed to benzo[a]pyrene(400mg/kg diet, fiber-free) showed significant increse in the activity of BPH ; 27 times in liver, 7 times in stomach, 18 times in small intestinal mucosa and 3 times in large intestine. The inhibition in BP -induced BPH activity by dietary fiber in liver, stomach and small intestinal mucosa was observed in the decreasing order : 10 % perctin > 10% polydextrose >5 % polydextrose > 10% cellulose. Decreased BPH induction indicates that soluble dietry fibers, especially pectin and polydextrose in this study, protect the tissues of digestive system from exposure to BP.

• 대한안전경영과학회지
• /
• 제25권3호
• /
• pp.31-36
• /
• 2023

The use of hanging scaffolding for exterior wall painting and cleaning in building construction and maintenance carries the inherent risk of fall accidents. While periodic rope replacement is crucial for preventing accidents resulting from rope breakage, current regulations lack specificity in determining appropriate disposal period for fiber ropes. This study analyzed the tensile strength of the most commonly used PP fiber ropes with different diameters (16 mm, 20 mm) in the domestic construction industry. Additionally, the effect of outdoor exposure was examined by measuring the tensile strength of new ropes and ropes exposing to outdoor conditions for 30 days and 90 days. The results showed that the new ropes and those exposed to outdoor for 30 days met the KS (Korean Standards) criteria for tensile strength. However, a significant decrease in tensile strength was observed in ropes exposed to outdoor for 90 days compared to both the new ropes and those exposed for 30 days. Furthermore, the ropes exposed for 90 days did not meet the KS criteria. These findings indicate the degradation of PP fiber ropes due to UV (Ultra Violet) radiation, highlighting the importance of considering this factor when determining the replacement period for fiber ropes used in scaffolding work.

• 한국산업보건학회지
• /
• 제9권2호
• /
• pp.158-166
• /
• 1999

The purpose of this study was to investigate the correlation between airborne total dust and man-made mineral fibers (MMMF), and to estimate total dust concentration to maintain below the American Conference of Governmental Industrial Hygienists (ACGIH) Threshold Limit Value (TLV$^{(R)}$) for the MMMF. The regression coefficients between airborne total dust concentrations and fiber concentrations determined in the industries producing glass fibers, rock wool. refractory ceramic and continuous filament glass fibers products were 0.41, 0.42, 0.20 and 0.19, respectively. The size characteristics of fibers as well as the amounts of contaminated non-fibrous dusts could affect the correlation intensities. When total dust and fiber exposure data were compared with the occupational exposure limits, there was a large gap between two evaluation results. The regression coefficient between total dust and fiber data was increased ($r^2=0.88$) in the process of insulation installation generating in the higher levels of glass or rock wool fibers. In this case, an estimated total dust concentration of glass wool or rock wool fibers complying with the ACGIH TLV (1 f/cc) was $1.7mg/m^3$. In conclusion, the total dust and fibers concentrations was highly correlated at the higher exposure levels so that total dust-monitoring data could be used to control simply and economically and to estimate worker's exposure to fibers.

• 한국산업보건학회지
• /
• 제15권3호
• /
• pp.221-231
• /
• 2005

In this study, occupational exposures to man-made mineral fibers (MMMFs) including glass wool, rock wool, and continuous glass filament fibers were determined and evaluated on the American Conference of Governmental Industrial Hygienists (ACGIH) Threshold Limit Value (TLV). A total of 171 personal samples collected from 4 glass wool fiber, 2 rock wool fibers, 4 continuous filament glass fiber products manufacturing and a glass fiber and rock wool insulations using industries, and determined respirable fibers concentrations using the National Institute for Occupational Safety and Health (NIOSH) Method 7400, "B counting rule. The fiber concentrations of samples from workers installing thermal insulations in a MMMF using industry showed the highest value: geometric mean (GM) = 0.73 f/cc and maximum = 2.9 f/cc, 70% of them were above the TLV, 1 f/cc. Workers' exposure level (GM= 0.032 f/cc) in the rock wool manufacturing industries was significantly higher than those of glass wool (GM=0.012 f/cc) and continuous filament glass fibers (GM=0.010 f/cc) manufacturing industries (p<0.01). No samples were more than the TLV in the MMMF manufacturing industries. There was a significant difference among companies in airborne fiber levels.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2002년도 추계학술발표대회 논문집
• /
• pp.24-28
• /
• 2002

Composite reinforced fiber materials are used in lots of fields such as a part of aeronautic space, ship, machinery and so on because can make structure wished for necessary condition by control fiber direction and laminated sequence. As the use of advanced composites increase, specific techniques have been developed to repair changed composite structures. In order to repair the damaged part production high quality composite reinforced fiber are completed by control the surrounding temperature and press in autoclave. The quality is influenced heat exposure degree by chemical reaction for precessing. This study considerated influence limit of using by repair structure part and change of properties according to heat exposure degree for repairing.