• Korean Journal of Optics and Photonics
• /
• v.17 no.2
• /
• pp.136-142
• /
• 2006

This paper presents irradiance distribution model of light radiated from a step-index multimode optical fiber. The model is important in analysis of displacement response characteristics for intensity modulation type optical fiber sensors. The induced model was verified by experimental results. And the displacement response analysis result induced by using the irradiance distribution model was verified by experimental results and compared with using existing irradiance distribution models such as the constant model or the gaussian model. The experiment has better agreement with the analysis result using the induced model in this study than with the others models.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2009.05a
• /
• pp.531-532
• /
• 2009

This paper presents crack spacing which quantitatively considers the fiber distribution and prediction of uniaxial tensile behavior of ECC on the basis of crack spacing and fiber distribution. The predictions exhibit similar tensile stess-strain curves to the test results within 10% error.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2010.05a
• /
• pp.483-484
• /
• 2010

In this paper, it was intended to understand the effect of the fiber orientation distribution on the tensile behavior of Intra High Performance Cementitious Composites (UHPCC) and to estimate flow-dependent fiber orientation distribution and the corresponding tensile behavior of UHPCC.

• Macromolecular Research
• /
• v.10 no.4
• /
• pp.236-239
• /
• 2002

Centrifugation is a method to create functionally graded materials (FGM) with a thermosetting matrix. In this study the movement of short carbon fibers in an epoxy resin during the centrifugation process was modeled to determine the fiber distribution in the final product. For this purpose a form factor K was introduced to modify a set of equations that was previously shown to be valid for the motion of spheres. It was shown that the results of the simulation were in good agreement with the experimental data, when an empirical K factor of four was chosen.

• Composites Research
• /
• v.20 no.5
• /
• pp.13-19
• /
• 2007

Fiber-reinforced thermoplastic composites not only approach almost near to the strength of thermosetting composite but also has excellent productivity, recycling property, and impact resistance, which are pointed as weaknesses of thermosetting composites. The study for strength calculation of one direction fiber-reinforced thermoplastic composites and the study measuring precisely fiber orientation distribution were presented. Need the systematic study for the data base that can predict mechanical properties of composite material and fiber orientation distribution by the fiber content ratio was not constructed. Therefore, this study was investigated what affect the fiber content ratio and fiber orientation distribution have on the strength of composites. Fiber-reinforced thermoplastic composites by changing fiber orientation distribution and the fiber content ratio were made. Tensile strength ratio of $0^{\circ}$ direction of fiber-reinforced composites increased being proportional the fiber content and fiber orientation function as change from isotropy(J=0) to anisotropy(J=1). But, tensile strength ratio of $90^{\circ}$ direction by separation of fiber filament decreased when tensile load is imposed fur width direction of reinforcement fiber length direction.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.16 no.3
• /
• pp.125-132
• /
• 2007

The purpose of present paper is to investigate a fracture characteristics of the finite-width single-edge-notch(SEN) carbon fiber/epoxy reinforced plastics(CFRP) plates by using an acoustic emission(AE). Uni-directionally oriented 10 plies CFRPs specimen which had different notch length were prepared for monotonic tensile test. Matrix cracking appeared over whole testing process and fiber breaking appeared later on mainly Load distribution factor of the matrix confirmed that increased according as increases of plate width ratio. The amplitude distribution of AE signal from a specimens is an aid to the determination of the different fracture mechanism such as matrix cracking, disbonding, interfacial delamination, fiber pull-out, fiber breaking, and etc. In the result of AE amplitude distribution analysis, matrix cracking, fiber disbonding or interfacial delamination, and fiber pull-out or fiber breaking signal correspond to <65dB, <75dB, and <90dB respectively, Also, changes of the slope of cumulative AE energy represented crazing phenomena or degradation of materials.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.30 no.3 s.246
• /
• pp.260-268
• /
• 2006

The micromechanical approach was used to investigate the interfacial strain distributions of a unidirectional composite under transverse loading in which fibers were usually found to be randomly packed. Representative volume elements (RVE) for the analysis were composed of both regular fiber arrays such as a square array and a hexagonal array, and a random fiber array. The finite element analysis was performed to analyze the normal, tangential and shear strains at the interface. Due to the periodic characteristics of the strain distributions at the interface, the Fourier series approximation with proper coefficients was utilized to evaluate the strain distributions at the interface for the regular and random fiber arrays with respect to fiber volume fractions. From the analysis, it was found that the random arrangement of fibers had a significant influence on the strain distribution at the interface, and the strain distribution in the regular fiber arrays was one of special cases of that in the random fiber array.

• Proceedings of the Korean Fiber Society Conference
• /
• 2003.10a
• /
• pp.75-76
• /
• 2003

Current efforts to establish links between geometrical features and mechanical performance of nonwoven fabrics in general, and of point-bonded (spot-bonded) nonwovens in particular, would be served significantly by the measurements of Fiber Orientation Distribution Function (ODF) and tensile modulus which occurs during controlled-deformation experiments. Image analysis technique (using the Fast Furier Transform) is used to quantify the fiber orientation distribution. The results suggest that, within a typical window of processing conditions, ODF has a significant influence on the mechanical anisotropy. The data also suggest that mechanical anisotropy of thermally point-bonded nonwovens is likely to be governed by different stress mode according to the applied macroscopic tensile direction.

• Fibers and Polymers
• /
• v.5 no.3
• /
• pp.177-181
• /
• 2004

Current efforts to establish links between geometrical features and mechanical performance of nonwoven fabrics in general, and of point-bonded (spot-bonded) nonwovens in particular has been made using the measurements of Fiber Orientation Distribution Function (ODF) and tensile modulus which occurs during controlled-deformation experiments. Image analysis technique (using the Fast Fourier Transform) was used to quantify the fiber orientation distribution. The results suggest that, within a typical window of processing conditions, the fiber orientation has a significant influence on the anisotropical behavior of nonwoven. The data also suggest that mechanical anisotropy of thermally point-bonded nonwovens is likely to be governed by different load transfer mechanism according to the applied macroscopic tensile direction.

• Journal of Electrical Engineering and Technology
• /
• v.8 no.1
• /
• pp.156-162
• /
• 2013

This paper measures the hot spot temperatures in a single-phase, 154 kV, 15/20 MVA power transformer filled with natural ester fluid using optical fiber sensors and compares them with those calculated by conventional heat run tests. A total of 14 optical fiber sensors were installed on the high-voltage and low-voltage windings to measure the hot spot temperatures. In addition, three thermocouples were installed in the transformer to measure the temperature distribution during the heat run tests. In the low-voltage winding, the hot spot temperature was $108.4^{\circ}C$, calculated by the conventional heat run test. However, the hot spot temperature measured using the optical fiber sensor was $129.4^{\circ}C$ between turns 2 and 3 on the upper side of the low-voltage winding. Therefore, the hot spot temperature of the low-voltage winding measured using the optical fiber sensor was $21.0^{\circ}C$ higher than that calculated by the conventional heat run test.