• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2007년도 춘계학술논문 발표대회
• /
• pp.55-58
• /
• 2007

This study investigates the spatting properties of high strength concrete, $60\sim80MPa$ class, designed with diverse aspect ratios and fiber content of nylon(NY). Test showed that increase of fiber content and aspect ratio in concrete decreased the fluidity of fresh concrete, especially for 1580 and 3000 aspect ratio of fiber. As for the compressive and tensile strength, adding NY fiber did not significantly affect the values In the range of high strength. After completing the fire test, the specimens containing both 750 and 1000 aspect ratios of fiber protected the spatting occurrence even in 0.05vol.% of fiber content. This specimens indicated the residual compressive strength ratio at 37%, showing the most favorable value among other specimens. Therefore, it is demonstrated that to protect the spalling in high strength concrete considering the effective fluidity, strength and economic efficiency altogether, adding 0.05vol.% of NY fiber with 750 aspect ratio Is beneficial.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2005년도 추계 학술논문 발표대회
• /
• pp.39-42
• /
• 2005

This study investigates influence of organic fiber reinforced materials, affecting crack reduction of cement mortar using low grade natural sand(LNS). According to the test, for the properties of fresh mortar, the mortar using natural sand(NS) exhibited that flow value increased until adding most of fiber less than 1$\%$, except for Polyvinly alchol fiber(PVA), and then it decreased. Meanwhile, the mortar mixed with LNS showed that increase of fiber content decrease flow value, regardless of fiber type. Air content increased in the mortar adding nylon fiber(NY) and polypropylene fiber(PP), while it maintained or decreased in the mortar adding cellulose fiber(CL) and PVA. Compressive strength of the mortar does not affect during early age, but mortar using NS and adding 0.1$\%$ of fiber content increased the value, except for PP, at 28 age days, while the mortar mixed with LNS decreased. For the properties of tensile strength, mortar, using NS and adding individually PP and PVA, exhibited higher value. Especially 0.1$\%$ of NY provided the highest value. In addition, the mortar mixed with LNS resulted in improved tensile value as fiber content increased. It is demonstrated that mortar using LNS led to higher length change ratio than natural sand.

• 한국작물학회:학술대회논문집
• /
• 한국작물학회 2022년도 추계학술대회
• /
• pp.54-54
• /
• 2022

Recently, as one of the major problems in the quality of sweetpotato, occurrence of thin and long fibrous tissues in storage root acts as a negative factor when consumers eat sweetpotato. In this study, the fiber content was compared according to the cultivation period in storage roots of 'Sodammi' and 'Hopungmi', which were newly bred and developed, and in that of 'Hogammi', which contains a lot of fibrous tissues. To isolate of fiber from storage root, the Association Official Analytical Chemists (AOAC) method was applied for quantifying fiber present in storage root of sweetpotato. The fiber contents isolated by this method is calculated by converting the weight of the storage root. The fiber content was measured every 20 days from 60 to 120 days after planting. As a result of this study, the lowest amount of fiber was 'Hopungmi' (70~140 mg/100 g), and the highest amount of fiber was observed in 'Hogammi' (115~223 mg/100 g). 'Sodammi' showed an intermediate level (104~149 mg/100 g) between the fiber content of 'Hopungmi' and 'Hogammi'. The fiber contents of 'Hopungmi' was 39% lower than that of 'Hogammi'. As the increased cultivation periods, the fiber contents showed a tendency to decrease. In the future research, the length, thickness, and fiber contents will be investigated to compare the degree of taste inhibition.

• 대한기계학회논문집
• /
• 제14권2호
• /
• pp.393-398
• /
• 1990

A method is proposed which can be used to obtain the fibesr content distribution of compression molded long fiber-reinforced thermoplastic sheet for nonisothermal state. The fiber is modelled to be a sphere. Once the one-dimensional unsteady state heat conduction equation in solved, the mean temperature in defined across the thickness direction. The viscosity of matrix is determined with the mean temperature. Using the obtained viscosity, two-dimensional sheet0like part compression molding is simulated with the finite element method. Comparison with experiments shows that the method accurately predicts the distribution.

• 한국작물학회지
• /
• 제68권1호
• /
• pp.20-26
• /
• 2023

고구마 괴근에 함유되어 있는 섬유질 함량은 품종에 따라 차이가 있다. 일부 품종에서 찌거나 구워서 섭취 시 입안에서 감지되는 섬유질 함량이 많아 식감을 떨어뜨리는 요인이 되고 있다. 본 시험은 섬유질 분리를 위한 거름망(체)의 적정 눈 크기를 탐색하여 분리 방법을 확립하고, 분리된 섬유질의 조성성분, 염색법을 이용한 섬유질 간이검정 가능성, 그리고 품종 간에 섬유질 함량 차이를 구명하고자 수행한 결과는 다음과 같다. 1. 찐 고구마를 으깬 후 3회 세척하여 섬유질 함량을 측정한 결과 143.3 mg/100 g으로 5회 세척(128.4 mg/100 g)에 비해 분리된 섬유질 양이 많아 3회 세척이 유리하였다. 2. 호감미 품종은 체의 눈이 큰 10 mesh (85.9%)와 30 mesh (9.6%)에서 95.5%가 잔류되었고 진율미 품종은 10 mesh (74.9%) 및 30 mesh (16.7%)에서 87.6%가 잔류되어 섬유질 분리를 위한 체의 눈은 30 mesh (600 ㎛)가 적당하였다. 3. 고구마 품종별 섬유질 함량 분석 결과, 진홍미가 가장 낮았고(24.8 mg/100 g), 호감미(111.4 mg/100 g)으로 가장 높아 호감미의 섬유질 함량은 진홍미의 4.5배 이상이었다. 4. 호감미와 진율미 품종에서 분리된 섬유질의 셀룰로스, 헤미셀룰로스 및 리그닌의 함량은 비슷한 함량을 나타내었고 2품종의 평균은 각각 32.5, 22.3 및 29.6%이었다. 5. 염색된 면적의 분포도와 섬유질 함량과의 상관계수는 0.79 (p < 0.001)로 유의성이 있었으며, 품종 간 염색 분포도가 다르게 나타나 생고구마를 이용한 염색방법으로 섬유질 함량에 대한 간이검정이 가능할 것으로 판단되었다.

• 콘크리트학회지
• /
• 제8권5호
• /
• pp.163-170
• /
• 1996

셀룰로우스 섬유는 강도와 강성측면에서 우수하고 동시에 적은 에너지로 가공이 가능하며, 또한 가격 면에서도 유리하고 풍부한 양으로 인해 시멘트의 보강재료로서 적당하다. 셀룰로우스 섬유 시멘트 복합체는 일반적으로 슬러리-탈수 가공에 의해 생산되며 평면이나 곡면 등의 시멘트 복합제품으로 얇은 판을 만드는데 주로 사용되어진다. 본 연구에서는 셀룰로우스 섬유 혼입률과 여러 가지 수분상태에서의 강도 특성을 실험에 의해 고찰하였다. 이들 시멘트 복합체의 강도효과에 대한 실험결과들의 검증을 위하여 통계학적인 분산분석과 다중비교에 의한 분석을 수행하였다. 휨강도는 섬유 혼입률이 약 8%까지 상승할 때 증가하였으며, 휨인성은 섬유 혼입률의 증가에 따라 증가하였다. 수분함유량은 휨강도에 중요한 요인으로 작용하였는데, 수분 함유량의 증가는 휨강도의 감소를 가져온 반면, 휨인성의 증가를 보여주었다. 시멘트 복합체에 포졸란 재료를 사용하였을 경우 수분에 의한 영향은 크지 않은 것으로 나타났으며 약간의 휨인성의 감소와 더불어 휨강도의 증가를 보였다.

• 한국지반공학회논문집
• /
• 제16권6호
• /
• pp.87-95
• /
• 2000

A series of consolidated undrained triaxial compression testes were performed to increase field applications of soil admixtures mixed with short fiber. Kaolin clay and three types of fiber were selected and auto cutter was used to obtain reliable length of fibers. Remolded soil specimens were tested for obtaining the basic data to be applied to the reinforcement of soft clay, embankment or barrier and clay liner of wastes landfill etc. Conversion equations from weight to volume of clay mixed with short fiber are introduced and relationships between fiber content and fiber concentration are derived. It is found that reinforcing effect by aspect ratio and mixing ratio of short fiber decreases as confining pressure increases. The best efficient reinforcing effect is given at the aspect ratio of 80~120 and the fiber content of 1.2%~2.4% and the fiber diameter of 0.27mm.

• Geomechanics and Engineering
• /
• 제18권5호
• /
• pp.503-513
• /
• 2019

In the present, the liquefaction potential of fiber-reinforced sandy soils was investigated through the energy-based approach by conducting a series of strain-controlled cyclic simple shear tests. In the tests, the effects of the fiber properties, such as the fiber content, fiber length, relative density and effective stress, and the test parameters on sandy soil improvement were investigated. The results indicated that the fiber inclusion yields to higher cumulative liquefaction energy values compared to the unreinforced (plain) ground by increasing the number of cycles and shear strength needed for the liquefaction of the soil. This result reveals that the fiber inclusion increases the resistance of the soil to liquefaction. However, the increase in the fiber content was determined to be more effective on the test results compared to the fiber length. Furthermore, the increase in the relative density of the soil increases the efficiency of the fibers on soil strengthening.

• Advances in concrete construction
• /
• 제16권3호
• /
• pp.127-139
• /
• 2023

In this study, the steel fiber and the polypropylene fiber were used to enhance the mechanical properties of fully recycled coarse aggregate concrete. Natural crushed stone was replaced with recycled coarse aggregate at 100% by volume. The steel fiber and polypropylene fiber were used as additive material by incorporating into the mixture. In this test two parameters were considered: (a) steel fiber volume ratio (i.e., 0%, 1%, 1.5%, 2%), (b) polypropylene fiber volume ratio (i.e., 0%, 0.1%, 0.15%, 0.2%). The results showed that compared with no fiber, the integrity of cubes or cylinders mixed with fibers after failure was better. When the volume ratio of steel fiber was 1~2%, the width of mid-span crack after flexural failure was 5~8 mm. In addition, when the volume ratio of polypropylene fiber was 0.15%, with the increase of steel fiber content, the static elastic modulus and toughness of axial compression first increased and then decreased, and the flexural strength increased, with a range of 6.5%~20.3%. Besides, when the volume ratio of steel fiber was 1.5%, with the increase of polypropylene fiber content, the static elastic modulus decreased, with a range of 7.0%~10.5%. The ratio of axial compression toughness first increased and then decreased, with a range of 2.2%~8.7%. The flexural strength decreased, with a range of 2.7%~12.6%. On the other hand, the calculation formula of static elastic modulus and cube compressive strength of fully recycled coarse aggregate with steel-polypropylene fiber was fitted, and the optimal fiber content within the scope of the test were put forward.

• Journal of Nutrition and Health
• /
• 제23권7호
• /
• pp.492-503
• /
• 1990

This study was performed to investigate nutritional effect of various dietary fibers on lead absorption, and protein and lipid metabolisms in growing rats. Sixty male rats of Sprague-Dawley strain weighing 140$\pm$1.1g were blocked into 10 groups according to body weight and fed 10 kinds of diet different with fiber sources [non-fiber, cellulose, pectin, guar gum or carboxymethylcellulose(CMC)] and lead levels (0 or 1%) for 4 weeks. Results were summerized as follows : 1) Food intake, weight gain, FER and PER were remarkably decreased in lead(Pb)-added groups. Weight gain, FER and PER in Pb-added pectin group were significantly lower than those in Pb-added non-fiber group. 2) Liver and kidney weights, femur weight and length, hematocrit and hemoglobin content were decreased in Pb-added groups. Especially femur and liver weights in pectin groups were the lowest among groups. 3) Total protein content in serum was significantly decreased in Pb-added groups but was not different with dietary fiber sources. Total lipid content in serum was not different with dietary Pb levels and fiber sources, but cholesterol content in serum of guar gum group was significantly decreased by Pb addition. 4) Nitrogen, lipid and cholesteol contents in liver were significantly decreased in Pb-added groups, and lipid content in liver of pectin and CMC groups was lower than other groups. 5) Daily urinary and fecal excretions of nitrogen, kipid and cholesterol were decreased in Pb-added groups, and fecal nitrogen was significantly increased in Pb-added groups, and fecal nitrogen of cellulose and guar gum groups was significantly higher than other groups. Fecal excretions of lipid and cholesterol were increased by dietary fibers, and especially fecal lipid was remarkably increased in pectin and guar hum group. 6) Pb contents in liver and femur were decreased by dietary fibers. Especially Pb contents in liver, kidney and femur were significantly decreased in guar gum group. 7) Daily urinary and fecal excretions of Pb were significantly increased in cellulose and guar gum groups, and fecla excretion of Pb in guar gum group was twice of non-fiber group. Pb absorption ratio was significantly decreased in guar gum group. In conclusion, dietary fibers have effect on protein and lipid metabolisms, and decreased intestinal absorption of Pb by increasing fecal excretion. But the degree of effect was different with dietary fiber sources.