• 한국농공학회:학술대회논문집
• /
• 한국농공학회 1998년도 학술발표회 발표논문집
• /
• pp.444-448
• /
• 1998

This paper presents the results of an experimental investigation on the compaction and compressive strength of polypropylene fiber reinforced soils. This study has been performed to obtain the physical properties of PFRS(polypropylene fiber reinforced soil) such as strain-stress relationships, OMC(optimum moisture contents) and ${\gamma}$$_{dmax}$ (maximum dry unit weight), with four different concentrations(i.e., 0.1%, 0.3%, 0.5% and 1.0% weights) of mono-filament and fibrillated polypropylene fibers. The test results indicate an appreciable increase in strength due to addition of fibers. OMC is increased with the concentration ratio of fiber, but ${\gamma}$$_{dmax}$ is decreased. From the viewpoint of strength, the fibrillated polypropylene fiber soil is more effective than the mono-filament polypropylene fiber soil.oil.

• Computers and Concrete
• /
• 제22권2호
• /
• pp.209-220
• /
• 2018

In order to evaluate the effect of hybrid fibers on the flexural performance of tunnel segment at room temperature, twelve reinforced self-consolidating concrete (SCC) symmetric inclination beams containing steel fiber, macro polypropylene fiber, micro polypropylene fiber, and their hybridizations were studied under combined loading of flexure and axial compression. The results indicate that the addition of mono steel fiber and hybrid fibers can enhance the ultimate bearing capacity and cracking behavior of tested beams. These improvements can be further enhanced along with increasing the content of steel fiber and macro PP fiber, but reduced with the increase of the reinforcement ratio of beams. The hybrid effect of steel fiber and macro PP fiber was the most obvious. However, the addition of micro PP fibers led to a degradation to the flexural performance of reinforced beams at room temperature. Meanwhile, the hybrid use of steel fiber and micro polypropylene fiber didn't present an obvious improvement to SCC beams. Compared to micro polypropylene fiber, the macro polypropylene fiber plays a more prominent role on affecting the structural behavior of SCC beams. A calculation method for ultimate bearing capacity of flexural SCC symmetric inclination beams at room temperature by taking appropriate effect of hybrid fibers into consideration was proposed. The prediction results using the proposed model are compared with the experimental data in this study and other literature. The results indicate that the proposed model can estimate the ultimate bearing capacity of SCC symmetric inclination beams containing hybrid fibers subjected to combined action of flexure and axial compression at room temperature.

• Asian-Australasian Journal of Animal Sciences
• /
• 제31권8호
• /
• pp.1230-1237
• /
• 2018

Objective: The present study was undertaken to determine an optimal balance between the amount of physically effective neutral detergent fiber (peNDF) to metabolizable glucose (MG) on rumen fermentation, blood metabolites and growth performance of 8 to 10-month-old heifers. Methods: A total of 15 healthy Holstein heifers weighing an average of 256 kg (8 month of age) were randomly assigned to three groups of five. Treatment diets consisted of the following three $peNDF_{8.0}/MG$ levels: 1.46 (Treatment A), 1.74 (Treatment B), and 2.08 (Treatment C). Results: The results showed that the ratio of $peNDF_{8.0}/MG$ affected rumen fermentation, blood metabolites and growth performance of heifers. The average daily gain of heifers tended to decrease as the ratio of $peNDF_{8.0}/MG$ increased (p = 0.07). The concentrations of blood urea nitrogen, triglyceride, and cholesterol increased significantly (p<0.05), while the high-density lipoprotein concentration decreased (p<0.05). After feeding 2 h and 4 h, insulin concentration in Treatment A was greater than Treatment C (p<0.05). Propionate concentration had decreasing trend (p = 0.07); acetate to propionate ratio and non-glucogenic to glucogenic volatile fatty acid (NGR) increased significantly (p<0.05). In addition, the digestibility of dry matter, crude protein, neutral detergent fiber, and acid detergent fiber decreased significantly (p<0.05). Conclusion: The present investigation indicated that dietary $peNDF_{8.0}/MG$ ratio can affect the growth and development, blood metabolites, rumen fermentation and apparent digestibility of heifers, and the optimal dietary $peNDF_{8.0}/MG$ ratio for 8 to 10-month-old heifers in the present study was 1.46.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2010년도 춘계 학술대회 제22권1호
• /
• pp.265-266
• /
• 2010

본 연구에서는 도로 포장용 린 콘크리트의 균열저감 목적에 여러 종류의 섬유를 접목하여 물성을 비교 분석한 것이다. 실험결과 NY섬유를 사용한 경우 우수한 형상비와 친수성에 기인하여 비비시간이 짧아 가장 양호한 결과를 나타내었다. 또한 휨강도의 경우는 PP섬유에서 가장 높은 강도값을 나타내어 가장 우수한 것으로 분석되었다.

• 펄프종이기술
• /
• 제39권1호
• /
• pp.48-55
• /
• 2007

The aim of this article is to review the general property of the famous traditional Korean paper, "rice straw paper"(Bast-Fiber mixed with straw pulp), and to compare the paper qualities varying with the composition ratio of straw pulp, in order to revive the traditional paper in modem Korea. The experiment was carried out by making first the two different mixture papers, i. e., one is the paper of 50% bast fiber mixed with 50% straw pulp, and the other is the paper of 75% bast fiber with 25% oats straw pulp, and finally the 100% bast fiber paper was made for the purpose of comparison. The qualitative properties of these three kinds of paper with the different mixing ratio of the straw pulp were evaluated, and the findings of the experiment can be summarized as follow: 1. As to the quality aspects of the paper strength like tensile strength, breaking length, elongation, and tear strength, the test proved the 100% bast fiber paper as best, and the 50% mixed paper as the next good one. 2. In aspect of the printing adaptability such as density, opacity, brightness, whiteness, lab colors, air permeability, and roughness, the 50% mixed paper proved to be the best, due to the short cells in the straw pulp. 3. As to the air permeability, the larger ratio of straw pulp was found to be the lesser, and 75% bast fiber with 25% straw pulp mixture paper and the 100% bast fiber one were found 1/5 degree efficient. 4. In terms of the water absorption degree, 100% bast fiber paper was the fastest, but in case of mixture paper, 50% mixed one was a little faster up to the point of 1cm, while the two kinds of mixed ones appear to be almost similar to each other beyond the point. 5. The straw pulp mixed paper, especially the 50% mixed one was evaluated as the highest by the calligraphers who had experienced using the papers in terms of movement and feeling of the caligraphy and painting. In addition, although the 25% mixed paper is judged to be good for book printing because of the strength, the 50% mixed paper can be thought to be more desirable for painting and calligraphy. In conclusion, we will be able to make the quality paper with durability, by mixing the straw pulp with the bast fiber in proper ratio, following the tradition of Korean paper making.

• Food Science and Biotechnology
• /
• 제18권4호
• /
• pp.948-953
• /
• 2009

Apple and apricot powders (APL-P and APR-P) were produced from apple and apricot fruits and they were used in cookie formulation at the levels of 10-40% (in flour bases). The APL-P and APR-P were rich in terms of total dietary fiber (TDF) and antioxidant power. The APR-P supplemented cookies had higher spread ratio and lower hardness values than the APL-P supplemented ones at all addition levels. The color values of the APR-P supplemented cookies were all acceptable. Overall sensory scores of the cookies supplemented with APL-P and APR-P were not significantly different from the control up to 20% addition. TDF contents of the supplemented cookies increased significantly with increasing addition level (p<0.01). The replacement of flour by APL-P and APR-P in wire-cut cookies showed that the physical characteristics and textural properties of the cookies were significantly affected (p<0.01) and APR-P appeared to be a more suitable replacer of flour than APL-P. Addition of both fruit powders upto 20% into the cookie formulation were evaluated as acceptable in terms of the sensory properties.

• 한국재난정보학회 논문집
• /
• 제7권1호
• /
• pp.43-50
• /
• 2011

숏크리트의 보강재료로 사용되고 있는 강섬유는 강성이 크고 중량이 무거워 압송호스의 마모손상 및 파열 등 안전관리의 어려움이 있으며, 강섬유의 부식으로 인한 내구성 저하 및 높은 반발률 등이 개선사항으로 요구되고 있다. 이와 같이 2009년 개정된 규정에 의해 강섬유 외의 재료보강이 가능해짐에 따라 숏크리트 보강 재료로서 강섬유 이외의 다양한 섬유의 적용성 검토가 필요한 실정이다. 강섬유는 기타섬유에 비해 강성이 크고, 섬유의 형상에 따라 부착성능이 개선되지만, 유기섬유의 경우 강섬유에 비해 일반적으로 탄성계수 및 인장강도가 낮고 섬유의 뭉침 현상이 발생하여 숏크리트에서 재료보강으로 시용하기 어렵다. 이러한 관점에서 본 연구에서는 직경 $20{\mu}m$의 미세섬유를 다발형 단일 개체로서 공기압출성형을 통해 부착 비표면적을 크게 하여 역학적 성능을 고려하고, 섬유의 표면을 계면 활성제로 개질하여 분상성을 향상시킨 폴리아미드섬유와 강섬유, PP섬유를 혼입한 콘크리트를 비교하여 현장 활용을 위한 기초 자료를 제시하고자 한다.

• Composites Research
• /
• 제34권2호
• /
• pp.77-81
• /
• 2021

복합재료의 높은 비강도와 비강성으로 인해 복합재료는 다양한 산업분야에서 광범위하게 사용되고 있다. 특히, 탄소 섬유 강화 복합재는 많은 기계적인 구조물에 널리 사용된다. 또한 이방성 특성을 갖는 탄소 섬유 강화복합재는 금속 재료와 달리 섬유 방향에 따라 피로 거동을 이해하는 것은 구조 설계에 있어서 매우 중요하다. 따라서 본 논문에서는 비낌 축(off-axis) 시편에 따라 복합재료의 피로 수명에 미치는 영향을 실험적으로 평가하였다. 이를 위해 복합재료의 비낌 축 시편(0°, 10°, 30°, 45°, 60°, 90°)에 대해 인장 및 피로 시험을 수행하였다. 피로 시험 결과, 복합재의 피로 강도는 섬유 방향이 0도로부터 조금 벗어날수록 피로 강도가 크게 감소하였으며 많이 벗어날수록 적게 감소하였다. 이는 적층 각이 커질수록 섬유의 하중을 지지하는 역할이 감소했기 때문이다. 또한 복합재의 피로 선도에 비낌 축 각도를 평준화하는 피로 강도 비율을 도입하여 피로 수명의 경향을 분석하였다. 피로강도 비율(Ψ)-피로 수명 선도를 이용하여 적층 각도와 관계없이 피로 수명을 단일선으로 표현하였다. 피로 강도비율을 통해 평준화된 피로 선도를 이용하면 2개 이상의 비낌 축 각도를 가지는 복합재의 피로 선도만으로도 임의의 다른 비낌 축 각을 가진 동일한 복합재의 피로 수명 곡선의 도출이 가능하다.

• 한국터널지하공간학회 논문집
• /
• 제17권3호
• /
• pp.283-293
• /
• 2015

본 연구에서는 강섬유보강콘크리트의 부식저항성능을 규명하기 위한 촉진염소이온확산시험과 표면전기저항시험을 수행하였다. 또한 배합평가를 위한 기초시험으로서 굳지 않은 콘크리트 공기량, 일축압축강도, 굳은 콘크리트의 흡습시험을 수행하였다. 실험변수는 두 종류의 물-시멘트비(0.44, 0.50)와 세 개의 강섬유 혼입량(0.25%, 0.5%, 1%)으로 선정하였다. 주목할 것은 모든 타설시 콘크리트의 다짐량은 동일하게 하였다. 시험결과, 동일한 작업량으로 다짐이 되었을 때, 물-시멘트비에 상관없이 두배합 모두에서 강섬유 혼입률이 증가함에 따라 부식저항성능이 감소하는 것으로 확인되었다. 그러나, 동일한 강섬유 혼입비에 대하여 배합의 물-시멘트비가 낮은 콘크리트의 부식저항성능이 우수한 것으로 나타났다. 따라서, 강섬유보강콘크리트의 타설시 유동성의 확보와 충분한 다짐이 염소이온침투저항성능을 확보하기 위하여 매우 중요하다고 판단된다.

• Elastomers and Composites
• /
• 제57권3호
• /
• pp.107-113
• /
• 2022

The effects of fillers [talc, calcium carbonate, glass fiber, and EBR (ethylene-butene rubber)] on the shrinkage and mechanical properties of injection-molded polypropylene composites were investigated. The shrinkage correlated with the shape of the filler particles: at the same amount added, glass fibers with a large aspect ratio had the greatest effect on the shrinkage of polypropylene composites, followed by flake-shaped talc and granular calcium carbonate. It was confirmed that the addition of EBR rubber as an impact strength modifier reduced shrinkage proportionally to the added content. In addition, the addition of glass fiber resulted in the greatest increases in tensile and flexural strengths.