• Restorative Dentistry and Endodontics
• /
• v.32 no.5
• /
• pp.411-418
• /
• 2007

The most scientific and reliable method for deciding the tooth color is the instrumental measurement. However, such color measuring instrument shows the difference of the measuring value according to the diversified measuring condition. This study was conducted to evaluate what effect of the labial surface irregularity of the tooth to the result of the color measured by spectrometer. 11 models of the teeth were made by injecting the A2 shade Luxatemp Automix Plus (DMG, Germany) into the impression acquired from 11 adults. Standard disk samples (15 mm diameter, 7 mm thickness) were made with same material. CIE $L^*a^*b^*$ value was measured at the incisal, central, and gingival area of the central incisor, lateral incisor, canine and first premolar using Specbos 2100 (JETI, Germany) spectrometer. Color difference was calculated between labial surface and standard samples. Among all models of the teeth, $L^*\;and\;b^*$ value showed the reducing tendency as they go toward the gingival area, but $a^*$ value showed the increasing tendency. Color difference between model teeth and standard samples showed the most difference at the incisal area, but the gingival area showed the least difference. And the canine showed the least color difference from the comparison of standard sample, and the central incisor showed the highest difference (p < 0.01). Although the visually detectable difference of the measuring value showed notably depending on the type and measured area (p < 0.05), $L^*\;and\;a^*$ value showed notable differences depending more on the measured areas than on the type of the teeth.

• Korean Journal of Food Science and Technology
• /
• v.38 no.4
• /
• pp.475-482
• /
• 2006

The quality characteristics and functional properties of fermented soybean by lactic acid bacteria (FSB) were investigated and compared with those of soybean (control) and commercial cheonggukjang Powder (CGP). The crude protein, lipid, and fiber contents of FSB were similar to those in CGP. The vitamin $B_2$ content in FSB (1.4 mg%) was similar to the control (1.3 mg%) whereas it was remarkably low in the CGP (0.2 mg%). The bright yellow color of FSB determined by Hunter's colormeter was quite different from the dark reddish brown color of the CGP. The pH of FSB was the lowest and thee amino-nitrogen was 517.2 mg%, which was higher than that in CGP (468.1 mg%). Glutamic acid, aspartic acid and leucine were the most abundant amino acids. In particular, the increase in the glutamic acid level was noticeable in FSB. The fatty acid compositions of FSB and CGP were similar to the control. However, the sucrose and fructose levels were lower after fermentation but the glucose level was higher. The results of isoflavone analysis by HPLC showed that the levels of daidzein and genistein in FSB were as much as 48.33 and 52.82 mg%, respectively, which is higher than that found in CGP. The DPPH free radical scavenging effects of FSB and CGP were 1.8 times higher an those of the control. The fibrinolytic activity determined by the diameter of the lysed area on the fibrin plate was the most effective in FSB. In conclusion, it is believed that FSB has a similar or higher quality than CGP. Therefore, FSB is expected to be good functional food material.

• Journal of Animal Science and Technology
• /
• v.52 no.5
• /
• pp.441-448
• /
• 2010

This study was carried out to investigate the effects of the seeding dates and growth periods on the growth characteristics, dry matter yield and feed value of corn for silage in paddy field. The experimental design was arranged in a randomized block design with three replications. Treatments consisted of five seeding dates, 1 May (T1), 8 May (T2), 15 May (T3), 22 May (T4) and 29 May (T5). And harvesting time homologized by August 24. Therefore, growing periods were 115 days (T1), 108 days (T2), 101 days (T3), 94 days (T4) and 87 days (T5), respectively. In maturities at harvest time, T1, T2, T3, T4 and T5 were full dent, early dent, late dough, dough and early dough stage, respectively. Plant height and numbers of root system were highest in T5 (p<0.01), but leaf length was higher in T4 than others (p<0.05). Dead leaf, tip filling degree and ear circle were higher in T1 than others (p<0.05, 0.01). Leaf width, ear height, leaf number, ear length, stem diameter, stem hardness and brix were not significantly different among the treatments. Dry matter yield and TDN yield were higher in the order of T1 > T2 > T3 > T4 > T5 (p<0.01). Crude protein, crude ash, NDF, ADF and crude fiber were significantly higher in T4 (p<0.05, 0.01). But crude fat was the highest in T1, T3 was the lowest as compared to other treatments (p<0.01). Total EAA(essential amino acids) were higher in order of T4 > T3 > T1 > T2 > T5, and total NEAA (nonessential amino acids) were higher in order of T1 > T4 > T2 > T3 > T5, and total amino acids were higher in order of T4 > T1 > T3 > T2 > T5. But no significant differences were found among the treatments. TUFA (total unsaturated fatty acid) and TSFA (total saturated fatty acid) were in order of T1 > T2 > T3 > T5 > T4 (p<0.01). Minerals were the highest in T4 (4,721.25 mg/kg), and T2 (2,970.80 mg/kg) was the lowest as compared to other treatments (p<0.05). Based on the above results, seeding dates could be recommended as early May, and harvest times is yellow ripe stage for qualitative and quantitative production of corn for silage in rice paddy field soil.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.35 no.4
• /
• pp.290-296
• /
• 2015

This study was conducted to investigate the influence of the mixed application of chemical fertilizer (CF) with liquid swine manure (LSM) on the agronomic characteristics, dry matter yield, minerals, and free sugar in cultivating Sorghum ${\times}$ Sorghum Hybrid (SSH) on paddy soil. The field experiment was designed in a randomized block design with three replications and consisted of CF 100% (C), CF 70% + LSM 30% (T1), CF 50% + LSM 50% (T2), CF 30% + LSM 70% (T3), and LSM 100% treatment (T4). The application of LSM was based only on the nitrogen (150 kg/ha). Plant length, leaf length, leaf width and stem diameter were significantly the lower in T4 (p<0.05). Stem hardness increased significantly (p<0.05) as the LSM application rate decreased. Fresh yield was the highest in T2, whereas the lowest in T3 (p<0.05). However, dry matter yields and TDN yield did not show significant difference among treatments. Crude protein was the highest in T1 (p<0.05). Crude fat content did not significant differences between the T1, T2, T3 and T4, but C showed a significantly different (p<0.05). NDF and crude fiber were the highest in T3 and C, respectively (p<0.05). However, ADF did not show significant difference among treatments. Total mineral contents were higher in the order of T1> T2> T4> T3> C (p<0.05). Free sugar contents were significantly higher at T1 and C as compared to other treatments. The analysis of all the above results suggests that the application of liquid swine manure is very effective, considering the yield performance and the content of mineral and free sugar. In addition, liquid swine manure may be possible to grow SSH without chemical fertilizer.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.24 no.3
• /
• pp.225-230
• /
• 2004

Jeju native sorghums were grown with six different planting densities ($5{\times}5cm,\;10{\times}10cm,\;15{\times}15cm,\;20{\times}20cm,\;25{\times}25cm\;and\;30{\times}30cm$) from April 3 to September 6 in 2000 in Jeju island to determine the influence to growth, yield and feed value by the planting densities. Days to heading were delayed from 66 days to 69 days as increasing of plant density. Plant height was 195.1cm at $30{\times}30cm$ plot, whereas that was 216.5cm at $10{\times}10cm$ plot, indicating that the plant was higher by the decrease of the planting density. As plant density increased, the number of leaves and steam diameter were decreased. Fresh forage yield increased from 25.4 to 61.3 MT/ha, dry matter (DM) yield from 5.8 to 16.5 MT/ha, crude protein (CP) yield from 0.4 to 1.5 MT/ha and total digestible nutrients (TDN) yield from 2.7 to 8.8 MT/ha as planting density from $30{\times}30cm\;to\;10{\times}10cm$ plot. Crude protein content increased from 7.0 to $9.0\%$, ether extract content from 1.7 to $4.4\%$, nitrogen free extract content from 36.9 to $38.4\%$ and TDN content from 46.1 to $55.5\%$ as planting density was decreased. whereas crude fiber content decreased from 43.9 to $37.1\%$ and crude ash content from 8.4 to $6.8\%$.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.24 no.3
• /
• pp.231-236
• /
• 2004

In order to identify the growth characteristics, the yield and chemical composition of Jeju native sorghum(Sorghum bicolor L.) based on seeding date in Jeju region. Seeding carried out the 10-day intervals from March 27 to May 27 in 2000, respectively. Plant height was 222.9 cm, Showing the highest on seeding date, April 7 among that of any other seeding date. On the other hand, those of early and late seeding gradually decreased. The results of stem diameter, number of leaves were similar to those of the plant height. The yield of fresh, dry matter forage, crude protein and TDN found the highest on April 7 seeding, 48.0 MT/ha, 12.0 MT/ha, 1.0 MT/ha, 5.3 MT/ha, respectively. In early and late seeding, the yield was gradually decreased. According to delaying the seeding date, March 27 to May 27, the contents of crude protein (from 7.8 to $11.4\%$) ether extract(from 1.7 to $3.3\%$), nitrogen free extract(from 34.1 to $40.0\%$) and TDN(from 42.9 to $52.5\%$) were gradually increased, respectively. On the other hand, those of crude fiber (from 40.6 to $32.3\%$) and crude ash (from 10.3 to $7.6\%$) were decreased. These results showed that April 7 was the optimum seeding date with the sole object of feed production of Jeju native sorghum.

• Journal of the Korean Chemical Society
• /
• v.39 no.1
• /
• pp.66-70
• /
• 1995

The soil humic acid was subdivided into four subfractions by molecular weight (F1: >100.000 dalton; F2: >100.000 dalton; F3: >10.000 dalton; F4: >2.000 dalton) using MP-dual hollow fiber ultrafiltration system. The characterization using IR, 1H and 13C NMR spectroscopy, showed similar spectroscopic features of HA, demonstrating that the bulk properties of HA subfractions are very similar to one another. IR spectral data showed a decrease in polysaccharide contents and increase in carboxylate functionality as molecular weight become smaller.functions. The structure of (NO) can be described by two interactions (N${\cdot}{\cdot}{\cdot}$N, N${\cdot}{\cdot}{\cdot}$O). One is the ONNO structure with an (N${\cdot}{\cdot}{\cdot}$N) interaction. In this structure, acyclic cis-ONNO with $C_{2v}$-symmetry, acyclic trans-ONNO with $C_{2h}$, and cyclic ONNO with trapezoidal structure ($C_{2v}$) are optimized at the MP2 level. The other structure is the ONON structure with an (N${\cdot}{\cdot}{\cdot}$O) interaction. In the structure, acyclic cis-ONON with Cs$^{-symmetry}$ and cyclic ONON of the rectangular ($C_{2h}$), square $(D_{2h})$, rhombic $(D_{2h})$, and parallelogramic $(D_{2h})$ geometries are also optimized. It is found that acyclic cis-ONNO $(^1A_1$) is the most stable structure and cyclic ONNO ($^3A_1$) is the least stable. Acyclic trans-ONNO ($^3A_1$) with an (N${\cdot}{\cdot}{\cdot}$N) interaction, acyclic trans-ONON and bicyclic ONON $(C_{2v})$ with (N${\cdot}{\cdot}{\cdot}$O) interaction, and acyclic cis- and trans-NOON with an (O${\cdot}{\cdot}{\cdot}$O) interaction can not be optimized at the MP2 level. Particularly, acyclic trans-ONNO with $C_{2h}$-symmetry can not be optimized at the CCSD(T) level. Meanwhile, acyclic NNOO ($^1A_1$, $C_s)$ and trianglic NNOO ($^1A_1$,$C_{2v})$ formed by the (O${\cdot}{\cdot}{\cdot}$N) interaction between $O_2$and $N_2$are optimized at the MP2 level. The binding energies and the relative energy gaps among the isomers are found to be relatively small./sec. Spiral CT scans during the arterial phase were obtained 35 seconds after the injection of contrast medium. CT findings of 78 lesions less than 4cm in diameter were correlated with angiographic findings. Results : The attenuation of lesions was high(n = 69), iso(n = 5), and low(n = 4) compared with liver parenchyma during the arterial phase of spiral CT. In lesions with high-, iso-, and low-attenuation during the arterial phase of spiral CT, hypervascularity on angiograms was found in 63 of 69(91.3%), three of five(60%), and three of four lesions(75%), respectively. Six lesions with high-attenuation on the arterial phase of spiral CT were not seen on angiography. Two iso-attenuated and one low-attenuated lesion were hypovascular on angiograms. Conclusion : The results of this study suggest that with some exceptions there was good correlation between the arterial phase of spiral CT and angiography.

• Journal of Navigation and Port Research
• /
• v.26 no.3
• /
• pp.323-328
• /
• 2002

Soil-steel structures have been used for the underpass, or drainage systems in the road embankment. This type of structures sustain external load using the correlations with the steel wall and engineered backfill materials. Buried flexible conduits made of corrugated steel plates for the coastal road was tested under vehicle loading to investigate the effects of live load. Testing conduits was a circular structure with a diameter of 6.25m. Live-load tests were conducted on two sections, one of which an attempt was made to reinforce the soil cover with the two layers of geo-gird. Hoop fiber strains of corrugated plate, normal earth pressures exerted outside the structure, and deformations of structure were instrumented during the tests. This paper describes the measured static and dynamic load responses of structure. Wall thrust by vehicle loads increased mainly at the crown and shoulder part of the conduit. However additional bending moment by vehicle loads was neglectable. The effectiveness of geogrid-reinforced soil cover on reducing hoop thrust is also discussed based on the measurements in two sections of the structure. The maximum thrusts at the section with geogrid-reinforced soil cover was 85-92% of those with un-reinforced soil cover in the static load tests of the circular structure; this confirms the beneficial effect of soil cover reinforcement on reducing the hoop thrust. However, it was revealed that the two layers of geogrid had no effect on reducing the overburden pressure at the crown level of structure. The obtained values of DLA decrease approximately in proportion to the increase in soil cover from 0.9m to 1.5m. These values are about 1.2-1.4 times higher than those specified in CHBDC.