• Journal of the Korean Wood Science and Technology
• /
• 제25권2호
• /
• pp.21-26
• /
• 1997

Lignin viscous material was prepared from acetosolve lignin by phenolation and heat treatment. The yield of phenolation was about 160% with p-toluene sulfonic acid(2% of acetosolve lignin) as catalyzer. Phenolated lignin has a good spinnability and thermosetting property by $300^{\circ}C$ treatment with vaccum. Acetosolve lignin carbon fiber has $20{\pm}5$ m diameter and $68.2{\pm}10\;kg/mm^2$ tensile strength. The yield of carbon fiber based on acetosolve lignin was 31%.

• 대한소아치과학회지
• /
• 제48권1호
• /
• pp.105-114
• /
• 2021

이 연구의 목적은 광중합기의 조사단에 광섬유를 적용하였을 때, 조사단과 교정용 버튼의 베이스 사이의 거리와 광섬유 직경에 따른 교정용 버튼의 전단결합강도를 평가하는 것이다. 발치된 소구치 315개를 I, II, III군으로 나누어 광섬유를 사용하지 않거나 3.0, 5.0 mm 직경의 광섬유를 사용하였고 각 군을 A, B, C의 하위군으로 분리하여 5.0, 10.0, 15.0 mm 깊이로 조사단과의 거리를 설정하여 전단결합강도를 측정하였다. 거리 증가에 따라 I군의 전단결합강도가 유의하게 감소하였다. 광섬유 직경에 따른 전단결합강도를 평가했을 때 거리가 5.0 mm인 경우 군 간에 유의성이 관찰되지 않았고 10.0 mm인 경우 IB군에 비해 IIIB군에서 유의하게 높은 전단결합강도를 보였고 15.0 mm인 경우 IC군에 비해 IIC, IIIC군 모두 유의하게 높은 전단결합강도를 보였다. 고로 광중합기의 접근성이 떨어질 때, 광섬유 사용이 추천되며 직경이 큰 광섬유가 성공적인 버튼 부착에 도움이 될 것으로 사료된다.

• Journal of Oral Medicine and Pain
• /
• 제22권2호
• /
• pp.309-325
• /
• 1997

In order to set the lasing variables and evaluate, clinically, the therapeutic effects of a pulsed Nd:YAG laser on oral lesion, the author applied the laser energy from a fiberoptic delivered, free running, pulsed Nd:YAG laser (wavelength 1064nm, Pulse duration 120$\mu$sec, fiber diameter 200$\mu$m/320$\mu$m) to 22 cases of oral soft tissue lesions and 6 cases of oral hard tissue lesions. The obtained results were as follows : 1. The effective excision with contact mode and the effective hemostasis of accompanied bleeding with noncontact mode were occurred by lasing on oral soft tissue lesions with fiber diameter of 320$\mu$m under the variables of 2.0~4.0W and 20~50Hz which were controlled into high power/low pulses for excision, low power/high pulses for hemostasis, low power in granulation tissue and high power in fibrous tissue according to therapeutic goals and tissue conditions. 2. About 50% of decreasing effect on hypersensitivity was occurred by lasing with non-contact and contact mode on cervical abrasion which caused dentinal hypersensitivity with fiber diameter of 320$\mu$m under the variables of 0.7 - 1.0W and 10Hz which were applied 2~3 times with 1 week interval. 3. The effective sterilization of infected root canal and lesion of periapical abscess was occurred by lasing with contact and spiral modes on wall of root canal and periapical abscess with fiber diameter of 200$\mu$m of which the tip was placed about 1mm shorter than root canal length under the variables of 1.OW and 10Hz.

• 한국세라믹학회지
• /
• 제32권9호
• /
• pp.995-1002
• /
• 1995

The alumina fiber was obtained by extruding the TEA complexed polymeric sol, synthesized by the alkoxide sol-gel method, through nozzle. The purpose of this study was to investigate the properties of fiber spun by TEA complexed sol. The analysis of sol indicated that TEA was bonded at alkoxide precursor and the optimum molar ratio for spinning was 0.5 mole of TEA, 3 mole of H2O. The cross section of the fiber from circular nozzle was not circular but oval, which indicated that the shape of nozzle did not affect the shape of fiber. The diameter of the fiber was about 100 ${\mu}{\textrm}{m}$ in the state of dried gel fiber, 60${\mu}{\textrm}{m}$ in calcined fiber, and the tensile strength of the fiber calcined at 90$0^{\circ}C$ was 2.1$\times$108 Pa.

• Fibers and Polymers
• /
• 제4권3호
• /
• pp.124-128
• /
• 2003

Dark brown Alpaca fiber was reduced in shade via selective bleaching with peroxide. Two selective oxidative bleaching methods were tested on alpaca top to assess their effectiveness for color removal and fiber quality properties. Color change, bundle strength, weight loss, fiber diameter, surface modification, dye-ability and dye wash fastness were assessed for both methods and compared with the original brown top. Bleach method 1 (BL-I) showed little surface modification, 5.8% weight loss and 2.4% strength loss. D1925 yellowness index was reduced to 74.3 from 83.1 and provided a good base for the dyeing of medium to deep shades. Bleach method 2 (BL-II) displayed considerable surface modification, 7.8% weight loss and 18% strength loss. BL-II also resulted in a mean diameter reduction of 1.9 micron during bleaching. Yellowness was reduced to 64.5 from 83.1 and provided a very good base for the dyeing of medium to deep shades. BL-I showed better exhaustion of the premetallised dye Lanaset Violet B than BL-II. Wash fastness for BL-II was 1 grey scale unit poorer than BL-I. BL-II showed far better color clarity at pale depths however the wash fastness of the finished product was not good enough to maintain the depth or clarity of the color. BL-I showed poorer clarity of color but exhibited better wash fastness results.

• Journal of the Korean Wood Science and Technology
• /
• 제52권4호
• /
• pp.393-403
• /
• 2024

As an archipelagic country, Indonesia is surrounded by large and small islands. Many mangrove plant species are found along the coasts surrounding large and small islands. Besides their conservation value, mangrove plants provide various benefits, including the use of their leaves, fruit, bark, and wood as raw materials in pharmaceutical and other industries. Additionally, mangrove wood is a potential raw material for pulp and paper production. It is essential to study the fiber dimensions of the wood to identify the appropriate characteristics of raw material for pulp and paper. Therefore, in this study, we comprehensively analyzed the differences in the wood fiber dimensions of seven mangrove species from the Indramayu Regency, West Java Province, namely Avicennia alba, Bruguiera gymnorhiza, Bruguiera cylindrica, Hibiscus tiliaceus, Sonneratia ovata, Sonneratia caseolaris, and Excoecaria agallocha. For this analysis, maceration followed the Forest Product Laboratory guidelines, and preparation followed the Sass method. The fiber length, diameter, and lumen diameter were measured using a light microscope. Based on the values of the length and dimension derivatives, the fibers of these mangrove wood species were grouped into quality classes II or III for use as raw materials for the pulp and paper industry. The wood fibers of H. tiliaceus, A. alba, S. caseolaris, and E. agallocha met the quality class criterion II, whereas wood species fibers of B. gymnorhiza, B. cylindrica, and S. ovata met the quality class criterion III.

• Journal of the Korean Wood Science and Technology
• /
• 제23권4호
• /
• pp.46-53
• /
• 1995

The anatomy of Korean diffuse-porous woods, 36 families, 75 genera, 145 species, 215 specimens was described and analyzed. Sixteen wood anatomical characters, habit and phenology factors were determined by simple correlation and principal component analysis. Strong positive correlations were found between vessel element length and fiber length, ray width and ray height, simple pits of fiber wall and paratracheal parenchyma distribution. The results of principal component analysis (PCA) disclose the primitive characteristics and the direction of xylem evolution of Korean diffuse-porous woods. The xylem evolution scenario for Korean dicotyledonous woods is considered to be developed in the direction of decreasing trends of vessel frequency, vessel element length, and length/diameter(L/D) ratio of vessel element but increasing trends of vessel diameter, fiber length/vessel element length(F/V) ratio, libriform wood fibers, simple perforation, and homogeneous ray composition. Increase of vessel diameter and decrease of vessel frequency seem to be related to the improvement of conductive efficiency, and increase of the vessel element length and occurrence of scalariform perforation in vessel element may be related to enhanced of conductive safety. Also the libriform wood fibers and ray features appear to have relationship with mechanical support and nutrient metabolism, respectively.

• Journal of the Korean Wood Science and Technology
• /
• 제24권1호
• /
• pp.1-10
• /
• 1996

The frequency distribution diagrams of Korean diffuse-porous woods, 36 families, 75 genera, 145 species, 215 specimens in relation to habit and phenology were analyzed. As the habit character changes from shrub to tree, such quantitative features as vessel frequency, percentage of solitary vessels, length/diameter(L/D) ratio of vessel element decreased but tangential vessel diameter, fiber length/vessel element length(F/V) ratio increased. Qualitative features such as helical vessel wall thickening, diffuse distribution of longitudinal parenchyma, heterogeneous ray composition decreased, while alternate intervessel pits, libriform wood fiber, simple perforations increase. As the phenology character changes from evergreen to deciduous species, such quantitative features as percentage of solitary vessels, vessel element length and L/D ratio decreased but tangential vessel diameter, F/V ratio increased. Diffuse distribution of longitudinal parenchyma, heterogeneous ray composition, and crystals in qualitative features decreased, while alternate intervessel pits, libriform wood fiber, simple perforation of vessel element, ray width and ray height increased.

• 한국섬유공학회:학술대회논문집
• /
• 한국섬유공학회 2003년도 The Korea-Japan Joint Symposium
• /
• pp.101-101
• /
• 2003

TLCP/Polyester binary blends were prepared by melt blending. Rheological, morphological, and thermal properties of of TLCP/polyester blends were investigated with viscosity ratio. Diameter of TLCP fibrils decreased with viscosity ratio. More and smaller TLCP fibrils were obtained at higher shear rate. Lower viscosity ratio was necessary for the fibrillation of TLCP in the binary blends.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2011년 춘계학술대회논문집
• /
• pp.88-91
• /
• 2011

Glass fiber drawing from a silica preform is one of the most important processes in optical fiber manufacturing. High purify silica preform of cylindrical shape is fed into the graphite furnace, and then a very thin glass fiber of 125 micron diameter is drawn from the softened and heated preform. A computational analysis is performed to investigate the heat transfer characteristics of preform heating and the glass fiber drawing in the furnace. In addition to the dominant radiative heating of preform by the heating element in the furnace, present analysis also includes the convective heat transport by the gas flowing around the preform that experiences neck-dawn profile and the freshly drawn glass fiber at high fiber drawing speed. The computational results present the effects of gas flow on the temperature of preform and glass fiber as well as the neck-down profile of preform.