• Korean Journal of Organic Agriculture
• /
• v.5 no.2
• /
• pp.105-115
• /
• 1997

This experiment was conducted to clarify the plant growth promoting effect of compost supplemented with cultured solution of photosynthetic bacteria(Rhodopseudomonas capsulatus) before sowing on the early growth of plug seedling of tomato and to evaluate the optimum concentration of bacterialization. Bacterializing concentrations(v/w) to the compost were 2%, 3.3%, 10%, 20% and 50%, respectively. Plant growth in terms of plant height, stem diameter, leaf area, total fresh and dry weight were promoted by the bacterialization of photosynthetic bacteria. Especially, in the plots supplemented with 10 to 20% the early growth was promoted markedly over 2 times. Compositions of photosynthetic bacteria consisted of crude protein 60.7%, soluble carbohydrates 20.1%, crude fat 7.6%, crude fiber 3.2% and crude ash 4.8, respectively.

• Food Science of Animal Resources
• /
• v.21 no.2
• /
• pp.142-148
• /
• 2001

Comparisons in physicochemical characteristics of longissimus muscle between the Korean native pig(KNP: 75kg of slaughter weight and 240 days of age) versus Landrace(110kg of slaughter weight and 180 days of age) are as below. Compared with Landrace, KNP had a greater drip loss resulting from a lower muscle pH and water holding capacity, greater L*(lightness), a*(redness) and b*(yellowness) values in muscle color, and a greater L* value and smaller a* and b* values in attached backfat color. Tenderness were greater in the Korean native pig. Moreover, KNP had a greater number of muscle fibers and a smaller diameter of the fiber when examined by scanning electron microscopy. In sum, the Korean native pig, compared with Landrace, had a greater redness in meat color, a greater whiteness in fat color; the lower WHC and greater tenderness of the former apparently resulted from the lower slaughter weight rather than from a species difference.

• Proceedings of the KSME Conference
• /
• 2000.04a
• /
• pp.274-279
• /
• 2000

This paper is concerned with the orthotropic problem of diaphragm-type air springs which consist of rubber linings, nylon reinforced rubber composite and bead ring. The analysis is carried out with a finite element method developed to consider the orthotropic properties, geometric nonlinearity using four-node degenerated shell element with reduced integration. Physical stabilization scheme is used to control the zero-energy modes of the element. An inflation analysis and a lateral deformation analysis of an air spring are carried out. Numerical analysis results demonstrate the variation of the outer diameter, the fold height, the vertical force and the lateral force.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2000.04a
• /
• pp.435-440
• /
• 2000

In this study, we aims to develop the machining technology for the ultra precision surface and profile accuracy. For this purpose, we construct the electrolytic in process grinding system (ELID grinding) and apply to the cylindrical and internal grinding. Through the various machining experiments such as SCM steel., ceramics, tungsten carbide etc., we have obtained nanometer surface roughness. And we have applied this mirror grinding technique to hydraulic manual valve and mold core of mini disk optical pick-up base. For the development of fine mechanical part machining technology, e have made multi fiber optical connector using fine grinding technology. And constructed micro drilling system with process monitoring system which is possible to drill 50${\mu}{\textrm}{m}$ diameter hole.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 1999.04a
• /
• pp.29-33
• /
• 1999

this paper concerned with the stress analysis of a diaphragm-type air spring which consists of rubber linings nylon reinforced rubber composite. The analysis is carried out with a finite element method developed to consider the orthotropic properties geometric non-linearity and contact between an air bag and a bead ring The material properties are evaluated with the Halpio-Tsai equations and the rule of mixture. The analysis results demonstrate the variation of the outer diameter the fold height and the vertical force with different models to the design a proper diaphragm air springs.

• Journal of the Korean Society for Precision Engineering
• /
• v.22 no.2
• /
• pp.172-179
• /
• 2005

A high-precision centerless grinding machine has been recognized as a core equipment performing the finish outer-diameter grinding process of ferrules which are widely used as fiber optic connectors. In this study, in order to realize the high-precision centerless grinding machine, the structural characteristic analysis and evaluation are carried out on the virtual prototype consisted of the steel bed, hydrostatic GW and RW spindle systems, hydrostatic RW feed mechanism, RW swivel mechanism, and on-machine GW and RW dressers. The loop stiffnesses of centerless grinding machine are estimated based on the relative deformations between GW and RW caused by the grinding forces. And the simulated results illustrate that the concrete-filled bed has the considerable effect on the improvement of the structural stiffness of centerless grinding machine.

• International Journal of Precision Engineering and Manufacturing
• /
• v.7 no.4
• /
• pp.34-39
• /
• 2006

High-precision centerless grinding machines are emerging as a means of finishing the outer diameter grinding process required for ferrules, which are widely used as fiber optic connectors. In this study, a structural characteristic analysis and evaluation were carried out using a virtual prototype of a centerless grinding machine to realize systematic design technology and performance improvements required to manufacture ferrules. The prototype consisted of a concrete-filled bed, hydrostatic grinding wheel (GW) and regulating wheel (RW) spindle systems, a hydrostatic RW feed mechanism, a RW swivel mechanism, and on-machine GW and RW dressers. The loop stiffness values of the centerless grinding machine were estimated based on the relative displacements between the GW and RW caused by grinding forces. The simulated results illustrated that a concrete-filled bed considerably improved the structural stiffness and accuracy of a high-precision centerless grinding machine.

• New & Renewable Energy
• /
• v.2 no.4 s.8
• /
• pp.39-45
• /
• 2006

This paper introduces a preliminary work for the design of a mini-dish cluster system for power generation. Each mini-dish [typically has a 20 to 30 cm in diameter] is designed with a simple parabolic profile concentrating sun light [after the glass glazing cover to avoid dust deposition on the reflector and facilitate cleaning] onto a centrally located small plane[or concave] mirror which is placed on the bottom side of a transparent glass cover. The mirror with a mini-dish concentrator is designed to focus beam radiation onto a focal point before it enters a bundle of optical fibers connected to a remote receiver for power generation. Different options are considered in designing a mini-dish concentrator to maximize its effectiveness for the collection and use of solar energy.

• Textile Coloration and Finishing
• /
• v.24 no.1
• /
• pp.27-32
• /
• 2012

Generally, hair treatments by complementary actions to give a sense of activity are permanent setting, dyeing, and bleaching, etc. In this study, we investigated the wave formation ability and hair damage occuring in permanent setting and bleaching process. The wave formation ability was evaluated by the differences of length and curl diameter after permanent setting. And the hair damage was also evaluated by the protein release ability and SEM of hair. The bleached hair immediately after permanent setting treatment has better wave formation ability, but much more damaged than the bleached hair after rinsing thoroughly with warm water. It was considered that the chain of hair keratin broke down easily by the bleaching action in the existence of permanent setting agents.

• Carbon letters
• /
• v.16 no.2
• /
• pp.121-126
• /
• 2015

Carbon fibers are prepared by stabilizing pitch fibers accompanying electron beam (E-beam) irradiation. The carbon fibers pretreated by E-beam irradiation achieve a higher stabilization index than the carbon fibers that are only heat-stabilized. In addition, the carbon fibers subjected to E-beam irradiation in the stabilization step exhibit a comparable tensile strength to that of general purpose carbon fibers. The carbon fibers pretreated with an absorbed dose of 3000 kGy have a tensile strength of 0.54 GPa for a similar fiber diameter. Elemental, Fourier-transform infrared spectroscopy, and thermogravimetric analyses indicate that E-beam irradiation is an efficient oxidation and dehydrogenation treatment for pitch fibers by showing that the intensity of the aliphatic C-H stretching and aromatic $CH_2$ bending (out-of-plane) bands significantly decrease and carbonyl and carboxylic groups form.