• Smart Structures and Systems
• /
• 제14권6호
• /
• pp.1055-1079
• /
• 2014

Substructure shake table testing is a class of real-time hybrid simulation (RTHS). It combines shake table tests of substructures with real-time computational simulation of the remaining part of the structure to assess dynamic response of the entire structure. Unlike in the conventional hybrid simulation, substructure shake table testing imposes acceleration compatibilities at substructure boundaries. However, acceleration tracking of shake tables is extremely challenging, and it is not possible to produce perfect acceleration tracking without time delay. If responses of the experimental substructure have high correlation with ground accelerations, response errors are inevitably induced by the erroneous input acceleration. Feeding the erroneous responses into the RTHS procedure will deteriorate the simulation results. This study presents a set of techniques to enable reliable substructure shake table testing. The developed techniques include compensation techniques for errors induced by imperfect input acceleration of shake tables, model-based actuator delay compensation with state observer, and force correction to eliminate process and measurement noises. These techniques are experimentally investigated through RTHS using a uni-axial shake table and three-story steel frame structure at the Johns Hopkins University. The simulation results showed that substructure shake table testing with the developed compensation techniques provides an accurate and reliable means to simulate the dynamic responses of the entire structure under earthquake excitations.

• 에너지공학
• /
• 제6권2호
• /
• pp.176-187
• /
• 1997

석탄가스화 복합발전시스템의 성능을 평가하기 위한 방안의 일환으로, 석탄시료의 탄종과 공급방식을 변경하면서 정적 시스템모사방법을 사용하여 생성 석탄가스의 발열량과 발전효율을 비교하였다. 석탄의 탄종은 유연탄 3종과 아역청탄 3종을 비교하였고 공급방식은 분류층 가스화기에서 사용되는 건식과 습식 두 가지에 대하여 비교하였다. 시스템 모사방법의 검증을 위해서는 모사결과를 Shell사와 Texaco사에서 발표된 같은 석탄시료에 대한 실증자료와 비교하여 사용된 모사방법이 적절함을 입증한 후 다른 시료에 대하여 모사방법을 적용하였다. 탄종에 따른 결과를 보면, 석탄내 탄소분이 많을수록 가스화에 의한 생성가스의 발열량과 발전효율 모두 증가하는 경향을 보이며 습식공급방식이 건식방식에 비해 탄종변화에 민감한 결과를 보였다. 특히, 습식공급 방식으로 아역청탄을 사용하는 경우는 생성가스의 발열량과 발전효율의 측면에서 유연탄에 비해 현저히 낮은 수치를 보여주고 있어 이용에 제한적임을 추정할 수 있었다. 발전효율 측면에서는 건식 석탄주입방식이 아역청탄의 경우 최대 3%, 유연탄의 경우 1% 정도의 효율이 습식방식에 비해 높게 모사 되었다.

• 모자간호학회지
• /
• 제3권2호
• /
• pp.142-152
• /
• 1993

In recent days, most of mothers prefer bottle feeding to breast feeding. Even mothers who started with breast feeding, change to bottle feeding in a short period. Many factors were reported causing the trend, but a significant influencing latter was revealed the mothers' perception that their breast milk wasn't enough for their babies. The purpose of this study were to identify how mothers of 30 years ago kept breastfeeding longer period for their child, and what were the diet they used in order to keep adequate breast milk secretion. The subjects of this study were 95 women who are over 60 years or older. Data were gathered by 13 authors by interview using structured questionnare. There were 16 questions related to subject's demographic informations and the specific recipe which they used, and 7 questions related to breast feeding techniques they used. Data were analyzed by SPSS/PC and content analysis. Results were as follows. 1. The subjects reflected that their milk secretion was enough to feed their tables. 2. More than half of the subject started breast feeding on the 3rd day after delivery and had continued breast feeding until they were pregnant again. 3. The subjects tried to eat as much rice and seaweed (MiYuk) soup as possible and didn't take any other specific diet during the breast feeding period. 4. The subjects didn't pay specific attention to the breast, general health. emotion, home environment. The only thing they did was being careful not to press breast when not feed. 5. Many subjects perceived that breast feeding made them healthy, and only 7% of subjects responded that they had some health problem during the breast feeding period.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제47권2호
• /
• pp.82-90
• /
• 2021

Objectives: Cleft lip and palate (CLP) is one of the most common congenital deformities with worldwide prevalence. It causes a range of issues for infants that mainly involve difficulty in feeding due to abnormal oronasal communication. For this purpose, feeding plates are provided to infants to act as an artificial palate to aid in feeding. The most crucial procedure in fabrication of a feeding plate is creation of the impression using the traditional finger technique or impression trays. This preliminary research aims to compare the effectiveness of novel impression trays with that of the traditional finger technique for recording impressions of infants with CLP. Materials and Methods: This randomized controlled trial was conducted among 30 infants who were divided into two groups based on the method of obtaining impressions: Group I, finger technique; Group II, specialized acrylic tray (cleftray). Results: Use of cleftray required less impression time, a reduced amount of material, no incidence of cyanosis/choking in infants, and lower anxiety among doctors compared to the traditional method. Additionally, there was no distortion of cleft impressions, recorded maxillary tuberosity, or other fine details. Therefore, the novel impression tray (cleftray) exhibited superior outcomes in all the parameters compared to the finger technique. Conclusion: Within the limitations of this study, we conclude that impression trays are superior to the traditional finger, spoon, or ice cream stick methods of creating impressions of CLP. However, it is necessary to conduct more clinical trials on a larger population based on other parameters to compare the effectiveness of the two techniques to draw definitive conclusions.

• Clinical and Experimental Pediatrics
• /
• 제57권12호
• /
• pp.505-513
• /
• 2014

While the survival of extremely premature infants with respiratory distress syndrome has increased due to advanced respiratory care in recent years, necrotizing enterocolitis (NEC) remains the leading cause of neonatal mortality and morbidity. NEC is more prevalent in lower gestational age and lower birth weight groups. It is characterized by various degrees of mucosal or transmural necrosis of the intestine. Its exact pathogenesis remains unclear, but prematurity, enteral feeding, bacterial products, and intestinal ischemia have all been shown to cause activation of the inflammatory cascade, which is known as the final common pathway of intestinal injury. Awareness of the risk factors for NEC; practices to reduce the risk, including early trophic feeding with breast milk and following the established feeding guidelines; and administration of probiotics have been shown to reduce the incidence of NEC. Despite advancements in the knowledge and understanding of the pathophysiology of NEC, there is currently no universal prevention measure for this serious and often fatal disease. Therefore, new potential techniques to detect early biomarkers or factors specific to intestinal inflammation, as well as further strategies to prevent the activation of the inflammatory cascade, which is important for disease progression, should be investigated.

• 소성∙가공
• /
• 제24권1호
• /
• pp.20-27
• /
• 2015

Hot tensile tests were conducted at different temperatures ranging from $20^{\circ}C$ to $550^{\circ}C$ to evaluate the mechanical properties of Al5052 seamless tubes. Such tubes can provide the technological foundation for complex forming using hot air bulging. Hot air bulging is one of the recently developed hydroforming techniques and it has some limitations in terms of cycle times. The benefits of hot air bulging are weight and cost savings through part consolidation and reduced post-forming processes such as welding and piercing. In order to extend the forming limits of Al lightweight material hot air bulging was investigated. A heated tube was placed in a heated die and sealed at the ends by sealing cylinders. The heated tube was subsequently expanded against the die cavity wall by internal pressure using air medium. The results of the current study show that axial feeding speed and air pressure have an effect on the formability of Al tubes during air bulging at elevated temperatures.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2009년도 춘계학술대회 논문집
• /
• pp.145-147
• /
• 2009

The benefits of hydroforming technology are known as weight and cost savings through part consolidation and reduced post-forming processes such as welding and piercing. Hydroforming technology has some weaknesses in terms of process cycle times. But, as the hydraulic system and process designs are continuously developed, the cycle time is also reduced to acceptable and competitive levels. Hot air bulging is one of recently developed hydroforming techniques. Hot air bulging in order to further extend the forming degrees of Al lightweight material is investigated. A heated tube is placed in a heated die and sealed at the ends by sealing cylinders. The tube is subsequently expanded against the die cavity wall by internal pressure provided by air medium. The result of this study shows that axial feeding speed and air pressure have an effect on formability of Al air bulging at elevated temperature.

• Advances in pediatric surgery
• /
• 제17권2호
• /
• pp.139-144
• /
• 2011

Hypertrophic pyloric stenosis (HPS) is the most common infantile surgical condition and the standard treatment is open pyloromyotomy. Recently, laparoscopic techniques have rapidly advanced, and the laparoscopic approach has become widely adopted by pediatric surgeons. The aim of this study was to compare the clinical outcomes between open and laparoscopic pyloromyotomy. We retrospectively evaluated outcomes of pyloromyotomy for HPS by the open (OP) and the laparoscopic (LP) method. The procedures were performed at the Samsung Medical Center between September 2001 and March 2009. We analyzed patient age, sex, birth weight, length of hospital stay, postoperative length of stay (LOS), operating time, time to feeding commencement, postoperative vomiting frequency, the time to full feeding without vomiting, and surgical complications. A total of 54 patients were included in the study. There were 26 OP and 28 LP patients. There was no statistically significant difference in age, sex, birth weight, operating time, postoperative emesis. In contrast, postoperative LOS in the LP group was statistically significantly shorter than that in the OP group (2.0 vs. 3.3 days, p=0.0003) and time to full feeding was significantly shorter following LP. (p=0.018) There were no wound complications. Laparoscopic pyloromyotomy significantly reduced postoperative LOS and time to full feeding compared to open pyloromyotomy.

• 한국전자파학회논문지
• /
• 제25권1호
• /
• pp.114-122
• /
• 2014

RF 및 마이크로파 대역에서 동축 프로브 급전구조에 대한 효율적인 유한 차분 시간 영역(FDTD: Finite-Difference Time-Domain) 해석을 위한 등가 전원 모델링 기법들의 상호 관계를 연구하였다. 기존에는 델타 갭(delta-gap) 또는 자기 프릴(magnetic-frill) 개념을 FDTD에 도입한 등가 전원 모델들이 여러 연구진에 의해서 개발되었다. 이러한 등가 전원 모델들의 FDTD 구현 방법과 모의 계산의 정확성은 서로 조금 다르다는 정도로만 잘 알려져 있었다. 본 논문에서는 준정적 근사(quasi-static approximation)하에서 동축-프로브 급전 구조에 대한 FDTD 등가 전원 모델들의 상호 관계를 제시하였다. FDTD 등가 전원 모델들의 적용방법에 따라 동축 급전된 원추형 모노폴 안테나의 시간영역과 주파수영역 응답을 수치계산하였다. 또한, FDTD 모의계산의 정확성과 효율성에 대한 비교 결과를 제시하였다.

• Journal of Microbiology and Biotechnology
• /
• 제24권1호
• /
• pp.59-69
• /
• 2014

One of the major challenges in metabolic engineering for enhanced synthesis of value-added chemicals is to design and develop new strains that can be translated into well-controlled fermentation processes using bioreactors. The aim of this study was to assess the influence of various fed-batch strategies in the performance of metabolically engineered Pseudomonas putida strains, ${\Delta}gcd$ and ${\Delta}gcd-pgl$, for improving production of medium-chain-length polyhydroxyalkanoates (mcl-PHAs) using glucose as the only carbon source. First we developed a fed-batch process that comprised an initial phase of biomass accumulation based on an exponential feeding carbon-limited strategy. For the mcl-PHA accumulation stage, three induction techniques were tested under nitrogen limitation. The substrate-pulse feeding was more efficient than the constant-feeding approach to promote the accumulation of the desirable product. Nonetheless, the most efficient approach for maximum PHA synthesis was the application of a dissolved-oxygen-stat feeding strategy (DO-stat), where P. putida ${\Delta}gcd$ mutant strain showed a final PHA content and specific PHA productivity of 67% and $0.83g{\cdot}l^{-1}{\cdot}h^{-1}$, respectively. To our knowledge, this mcl-PHA titer is the highest value that has been ever reported using glucose as the sole carbon and energy source. Our results also highlighted the effect of different fed-batch strategies upon the extent of realization of the intended metabolic modification of the mutant strains.