• 한국정밀공학회지
• /
• 제24권2호
• /
• pp.95-102
• /
• 2007

A feeding system is a key component in manufacturing packing boxes such as printing, slotting and gluing. The role of the feeding system is to feed corrugate cardboards which is usually tick and large. So, a special method is necessary to feed corrugate cardboards. This paper suggests a concept and an automatic feeding machine to feed corrugated cardboards using TRIZ, the theory of inventive problem solving. The automatic feeding machine consists of units to regulate the machine according to length and width of corrugated cardboards, a feeding part with a plurality of small rollers, and a sucking part which intensify frictional force between rollers and the lowest feeding cardboard. In particular, the feeding part is composed of an up-and-down motion plate with holes to suck the lowest corrugated cardboard as well as small rolling rollers after stopping in a moment. Thus this machine does not sensitive to size of corrugated cardboards and also can keep feeding accuracy during feeding fast.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1987년도 한국자동제어학술회의논문집; 한국과학기술대학, 충남; 16-17 Oct. 1987
• /
• pp.264-268
• /
• 1987

This paper is concerned on kinematic analysis and simulation of an automatic feeding mechanism subjected by the motion of a curvilinear inverse can. The curvilinear cam is rotated by positioning a translating roller and the automatic feeding mechanism is moved to the sliding position by the motion of a campin fixed on the curvilinear cam. The curvilinear cam consists of two arcs of circles and two straight lines. The modular approach is used for the kinematic analysis of the feeding mechanism. As the first part of the paper for the motion simulation of the cam-feeding system, this paper discusses the algorithm to simulate the motion of the cam-feeding mechanism. The second part of the paper presents the state-of-art for the graphics-oriented CAD technique,

• 한국정밀공학회지
• /
• 제18권5호
• /
• pp.177-185
• /
• 2001

This paper describes a machine-vision-based prototype system for automatically feeding engine-mount parts to a swaging machine which assembles engine mounts. The system developed consists of a robot, a feeding device with two cylinders and two photo sensors, and a machine vision system. The machine vision system recognizes the type of different parts being fed from the feeding device and estimates the angular difference between the inner-hole center of the part and the point predetermined for assembling. The robot then picks up each part and rotated it through the estimated angle such that the parts are well assembled together as specified. An algorithm has been developed to recognize different part types and estimate the angular difference. The test results obtained for a set of real specimens indicate that the algorithm performs well enough to be applied to prototype system.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1987년도 한국자동제어학술회의논문집; 한국과학기술대학, 충남; 16-17 Oct. 1987
• /
• pp.269-272
• /
• 1987

This paper is concerned on kinematic analysis and simulation of an automatic feeding mechanism subjected by the motion of a curvilinear inverse cam. The main objection is the development of computer-aided design (CAD) program for simulating the motion of the cam-feeding mechanism using computer-graphics. A computer program CACAFS (Computer-Aided Cam and Automatic Feeding System) is independent of computer hardware used. The program is also interactive using a menu-selection technique. As the second part of the paper for the motion simulation of the cam-feeding system, this paper discusses the state-of-art for CAD. The first part of the paper presents the algorithm to simulate the notion of the cam-feeding mechanism.

• 한국기계가공학회지
• /
• 제19권2호
• /
• pp.24-29
• /
• 2020

In South Korea, agricultural mechanization has been carried out in paddy field, but not in the upland field during recent decades. Among crops such as root vegetables, leafy vegetables from upland field, corn is used as forage for livestock as well as food for men. The corn harvester needs to be developed to replace men's labor in rural area to follow the recent needs in the farm industry. The corn harvester is comprised of three parts such as cutting part, feeding part and pick-up part. The feeding part is so long for cut corns to be delivered from the cutting part to the pick-up part. Structurally, the load from the long moment arm is likely to be big. Thus, the setup to measure the stress on the duct of the feeding part was configured with the data acquisition system. The strain gages were attached on several points that seem to be loaded a lot comparatively. The stress was measured and the measured stresses were divided by the yield stress to get the safety factor. And then, we made sure the safety factors were above 1 on the all points. In conclusion, the feeding part of the corn harvester which convey the cut corn from the cutting part from the pick-up part can be regarded to be made safe structurally.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2011년도 제37회 추계학술대회논문집
• /
• pp.801-804
• /
• 2011

추진제 탱크와 배관의 연결부에 대한 개념 설계단계로 해외 발사체의 배관 연결부를 조사하였고, 그 결과를 토대로 몇가지 대표 형상을 선정하여 유동해석을 수행하였다. 유동해석 결과 배관의 연결부 중 제일 유동특성이 좋은 것을 찾을 수 있었다, 하지만 큰 차이는 없었다. 그 이유는 배관이 길어서 배관 내부를 유체가 흐르면서 배관 내부 유동이 안정되는 것으로 판단된다.

• 한국기계연구소 소보
• /
• 통권17호
• /
• pp.93-97
• /
• 1987

This paper is concerned on kinematic analysis and simulation of an automatic feeding mechanism and a curved inverse earn. The main objective is the development 0 fan algorithm of the earn-feeding mechanism and a CAD program. The computer program CACAFS (Computer-Aided Cam and Automatic Feeding System) is developed by using the state-of-the-art for CAD. Thus, the program CACAFS is independent of computer hardwares and also interactive. As the second part of paper, this paper introduces the technique for the mechanism simulation and graphics-oriented CAD programming. The first part of r paper presents the algorithm to analyze the motion of the inverse earn and the automatic feeding mechanism.

• 한국기계연구소 소보
• /
• 통권17호
• /
• pp.83-91
• /
• 1987

This paper is concerned on kinematic Analysis and Simulation of an automatic feeding mechanism and a curved inverse cam. The main objective is the development of an algorithm of the cam-feeding mechanism and a CAD program. The computer program CACAFS (Computer-Aided Cam and Automatic Feeding System is developed by using the state-of-the-art for CAD. Thus, the program CACAFS is independent of computer hardwares and also interactive. As the first part of paper, this paper introduces the algorithm to analyze the motion of the inverse cam and the automatic feeding mechanism. The second part of paper presents the technique for the mechanism simulation and graphics-oriented CAD programming.

• 한국식품영양학회지
• /
• 제1권1호
• /
• pp.33-40
• /
• 1988

A Study was conducted to investigate the effect of feeding Lactobacillus casei YS on the growing performance and gastrointestinal flora of the suckling piglets, which were delivered from 2 heads of three-way crossbred(Landrace$\times$Large White$\times$Duroc) pigs, for 4 weeks. The results from the present study was summarized as follows. Average body weight gains of feeding group was slightly better than that of control group and diarrhea was prevented by successive 7 days feeding. Population levels of lactic acid bacteria were maintained about 107 colony forming unit(cfu) per gram of the contents in both feeding and control group at upper parts of small intestine. In this part, coliform count was greatly reduced in (ceding group but not in control group. pH values of the intestinal contents were gradually decreased especially at the upper part of alimentary track of feeding group. Among lactic acid bacteria, L. salivarius, L. cases and L. fermentum were found most predominant strains in feeding group, Wheareas L. salivarius, L. acidophilus and L. cunts in control group. In the other hand, Escherichia coli recovered from scouring pigs were resistant to the drug such as streptomycin, ampicillin and sensitive to gentamycin and neomycin in vitro test.

• Asian-Australasian Journal of Animal Sciences
• /
• 제19권1호
• /
• pp.91-96
• /
• 2006

The experiment was conducted to study the effect of choice feeding on growth performance, carcass quality, gastrointestinal development and feed utilization of 22-49 days old broilers. One hundred and forty four 22-day-old broilers were randomly allocated to 3 treatments with 4 replicates per treatment and 12 birds per replicate. Three feeding regimes are complete diet (control), ground corn and protein concentrate (treatment I), and soybean meal and balancer (treatment II). Protein concentrate is the residue part of complete diet without corn, and balancer is the residue part of complete diet without soybean meal. Treatment I and II are designed for the broilers to freely choose the two parts of diet. The results showed that: (1) broilers under choice feeding (treatment I and II) had lower performances compared with the control; (2) gastrointestinal development and the efficiency ratios that broilers converted dietary crude protein and lysine to body weight gain were improved in treatment I (p<0.05); (3) there were no significant differences in the apparent metabolizabilities of dietary dry matter, crude protein and gross energy, and deposition ratios of dietary nitrogen and energy, and carcass quality among three feeding regimes (p>0.05).