• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.39 no.8
• /
• pp.42-45
• /
• 2002

A low power SDRAM output buffer with reduced power line noise and feedthrough current is presented. In multi I/O SDRAM output buffer, feedthrough current as well as the corresponding power dissipation are reduced utilizing proposed undershoot protection circuits. Ground bounce is minimized by the pull down driver using intelligent feedback scheme. Ground bounce noise is reduced by 66.3% and instantaneous and average power are reduced by 27.5% and 11.4%, respectively.

• Proceedings of the KIPE Conference
• /
• 2005.07a
• /
• pp.257-260
• /
• 2005

Three different current-mode control schemes, peak current-mode control, charge control, and average current-mode control, are investigated for applications to asymmetrical half-bridge dc-to-dc converters. The principles, implementation, and performance of the three control schemes are compared in an attempt to identify the irrespective merits and limitations. Design examples for feedback compensations are given for the three control schemes. A 50 W experimental asymmetrical half-bridge dc-to-dc converter was used to experimentally verify the theoretical results of the paper.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.51 no.12
• /
• pp.659-663
• /
• 2002

The brake systems of high-speed train are to be equipped with three different brake systems, such as regenerative brake with regenerative feedback in driving car, a pneumatic disc brake, and non-contact linear eddy-current brake(ECB). The regenerative brake and the pneumatic disc brake are acting on the wheels. Their achievable braking force depends on the adhesive coefficient, which is influenced by the weather condition and speed, between the wheel and The linear eddy current brake gets an economical solution in the high-speed train because of the independence of the adhesive coefficient, no maintenance needed. and the good control characteristics. The braking force and the normal force of ECB for korean high-speed train are analysed by the 2D FEM(Finite Element Method). Finally the normal force is compared with the experiential values to verify the analysis.

• Journal of Power Electronics
• /
• v.10 no.2
• /
• pp.165-170
• /
• 2010

This paper presents a comparative study of P and PI controllers for a current source inverter (CSI) fed induction motor drive system. A dq model has been used which incorporates the induction motor and the inverter power supply with current feedback. The model is used first to generate the steady state curves to determine the operating point through computer simulations using the software package MATLAB. Then a transient analysis has been carried out for different values of the speed and current controller parameters. The controller value is adjusted by the Ziegler-Nichols method. It has been observed that the transient time to reach the steady state value is larger with the PI controller than with the P controller.

• Journal of Digital Contents Society
• /
• v.19 no.4
• /
• pp.621-630
• /
• 2018

This paper presents a case study on foreign language learning applications based on the speech recognition technology, aiming to grasp their current status and limitations of the technology applied to the foreign language speaking education, especially for English and French. As a result of examining the characteristics of the selected English and French applications by drawing on speech learning, it is shown that the use of speech recognition technology has the advantage of creating a speaking practice environment and giving feedback. However, in the case of feedback, there is a lack of appropriate calibration feedback which can help learners correct errors by themselves.

• Journal of Biomedical Engineering Research
• /
• v.35 no.6
• /
• pp.219-226
• /
• 2014

This study is to develop a basic life support (BLS) app using the android based smartphone and to evaluate the function of the app. Suggested app contains chest compression feedback function, the map of automated external defibrillator (AED), direct emergency call and the basic knowledge of BLS. Using the accelerometer of the smartphone, we implemented a real-time algorithm that estimates the chest compression depth and rate for high quality cardiopulmonary resuscitation (CPR). The accuracy of algorithm was evaluated by manikin experiment. We made contents which were easy to learn the BLS for the layperson and implemented a function that provides the AED location information based on the user's current location. From the manikin experiment, the chest compression depth and rate were no significant differences between the manikin data and the app's feedback data (p > 0.05). Developed BLS app was uploaded on Google Play Store and it was free to download. We expected that this app is useful to learn the BLS for the layperson.

• Proceedings of the KIPE Conference
• /
• 2004.07b
• /
• pp.528-532
• /
• 2004

Novel single-stage power factor correction AC/DC converter with low DC link voltage using new magnetic feedback technique is proposed in this paper. The Proposed converter has high power factor, tight output voltage regulation and low link capacitor voltage less than 450V for all the load range through the universal input line. This converter has also no dead-zone in the input current, which is seen in the conventional converter using the previous magnetic feedback technique. In this paper, the analysis of operations and features of the proposed converter is provided, and the experimental results of 90W-prototype shows the low harmonic distortions satisfied with EN 61000-3-2 Class D, high power factor and low link voltage less than 450V.

• Journal of Acupuncture Research
• /
• v.35 no.2
• /
• pp.47-51
• /
• 2018

Acupuncture is a complex intervention that manifests varied theories, treatment methods, diagnostic methods and diagnostic patterns. Traditionally based systems of acupuncture (TBSAs) often have their own diagnostic approaches and patterns. Despite the wide variety that can be found amongst TBSAs, is it possible that they share a common background in clinical observation and practice? Research has shown that multiple physiological pathways and mechanisms can be triggered by different acupuncture techniques and methods. It is highly likely that clinicians will have observed some of the effects of these responses and used those observations as feedback to help construct the patterns of diagnosis and their associated treatments. This review briefly examines this possibility. Pattern identification will have developed out of a complex interaction of factors that include; theories current at the time of their development, historical theories, personal choices and beliefs, training, practice methods, clinical observations and the natural feedback that comes from observing how things change once the treatment is applied. Researchers investigating TBSAs and pattern identification need to be more explicit about the systems they have investigated in order to understand the biological basis of pattern identification and their treatments.

• Journal of Drive and Control
• /
• v.13 no.3
• /
• pp.15-23
• /
• 2016

The direct-drive servo valve(DDV) is a kind of one-stage valve because the main spool valve is directly driven by the dc motor. Since the DDV structure is simple, it is less expensive, more reliable, and offers a reduced internal leakage and a reduced sensitivity to fluid contamination. The control system of the DDV is highly nonlinear due to a current limiter, a voltage limiter, and the flow-force effect on the spool motion. The shape of the step response of the DDV-control system varies considerably according to the magnitudes of the step input and the load pressure. The system-design requirements mean that the overshoots should be less than 20%, and the errors at 0.02s should be less than 2%, regardless of the reference-step input sizes of 1V and 5V and the load-pressure magnitudes of 0MPa and 20.7MPa. To satisfy the system-design requirements, the PID-controller parameters of $K_c$, $T_i$ and $T_d$, and the derivative-feedback gain of $K_{der}$ are designed using the root locus and manual tuning.

• The Journal of Korean Physical Therapy
• /
• v.24 no.1
• /
• pp.1-6
• /
• 2012

Purpose: The grip strength is influenced by various factors, such as position of the upper extremity, characteristics of the hand, and general physical condition. In this study, we investigated whether abdominal muscle activity in combination with the abdominal drawing-in maneuver has any effect on the grip strength in healthy young adults. Methods: This study included 31 healthy subjects (16 males, 15 females). We used surface electromyography and pressure bio-feedback unit for this experiment. All Subjects were placed in a cock-lying position with comfort and the grip strength was measured. On the following day, the pressure bio-feedback unit was placed beneath their fifth lumbar vertebra, and the, grip strength was measured again. This time, the measurement was taken while drawing-in their abdomen below the navel gently and gradually, while maintaining a neutral pelvic position. Results: The grip strength was significantly increased when subjects performed the drawing-in maneuver than when they were comfortable (p<0.05). In addition, activations of the rectus abdominal muscles significantly increased (p<0.05). Conclusion: In the current study, we found that abdominal muscle activity, in combination with the abdominal drawing-in maneuver, affected the grip strength, positively. Therefore, we suggest that this result should be considered when evaluating the grip strength.