• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.26 no.2
• /
• pp.243-253
• /
• 2002

This paper presents the system modeling, analysis, and controller design and implementation for a rotational inverted pendulum system(RIPS), which is an under-actuated system and has the problem of unattainable angular velocity state. A sliding mode controller using the parameterization of both the hyperplane and the compensator fur output feedback is applied to the RIPS. Also, to improve the performance of the control system, a disturbance observer which estimates the disturbance, parameter variation, and some modeling errors of RIPS with less computational effort is used together. The results of simulation and experiment show that the proposed control system has superior performance for disturbance rejection and regulation at certain initial conditions.

• Journal of Electrical Engineering and Technology
• /
• v.12 no.4
• /
• pp.1627-1633
• /
• 2017

This paper proposes a voice enhancing ear-protection system which is based on feedback active noise control(FBANC). The proposed system selectively suppresses the background noise and preserves the talking voice by controlling the adaptive algorithm with the voice activity period detection module. The noise reduction performance of the proposed noise canceling algorithm is analytically derived for the two key performance affecting parameters, i.e., electro-acoustic coupling distance and noise bandwidth. The proposed system is also implemented with a floating-point DSP system and its performance is experimentally tested to compare with the analytically derived results. The achieved levels of noise reduction for the three different noise bandwidths cases, i.e., 10Hz, 50Hz, and 90Hz, are high to show 17.05dB, 10.54dB and 8.99dB, respectively. The feasibility of the proposed system is also shown by the peak noise reduction achieved more than 25dB while preserving the voice component in the frequency range between 200-800Hz.

• Journal of Drive and Control
• /
• v.16 no.4
• /
• pp.56-64
• /
• 2019

Recently, as the environmental regulation for earth moving equipment has been tightened, advanced systems using electronic control have been introduced for energy savings. An IMV(Independent Metering Valve), which consists of four 2-way valves, is one of the electro-hydraulic control systems that provides more flexible controllability and potential for energy savings in excavators, when compared to the conventional 4-way spool valve system. To fully realize an IMV, a two-stage bi-directional flow control valve which can regulate the large amount of flow in both directions, should be developed in advance. A simple design that allows proportional flow control to apply the pilot pressure from the current-controlled solenoid to the spring loaded flow control spool and thus valve displacement, is proportional to the solenoid current. However, this open-loop type valve is vulnerable to flow force which directly affects the valve displacement. Force feedback servo of which the position loop is closed by the feedback spring which interconnects the solenoid valve and flow control spool, could compensate for the flow force. In this study, linearity for the solenoid current input and robustness against load pressure disturbance is investigated by linear analysis of the static nonlinear equations for the IMV proportional flow control valve with feedback spring. Gains of the linear system confirm the performance improvement with the feedback spring design.

• Journal of Institute of Control, Robotics and Systems
• /
• v.10 no.7
• /
• pp.590-596
• /
• 2004

A passivity-based dynamic output feedback controller design is considered for a finite collection of non-square linear systems. Design of a single controller for a set of plants i.e. simultaneous stabilization is an important issue in the area of robust control design. We first determine a squaring gain matrix and an additional dynamics that is connected to the systems in a feedforward way, then a static passivating control law is designed. Consequently, the actual feedback controller will be the static control law combined with the feedforward dynamics. A necessary and sufficient condition for the existence of the parallel feedforward compensator is given by the static output feedback formulation. In contrast to the previous result [1], a technical condition for constructing the parallel feedforward compensator is removed by proposing a new type of the parallel compensator.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.444-444
• /
• 2000

For a class of nonlinear systems which satisfy a certain condition so called output feedback exponential passivity (OFEP), it is well known that one can easily design a high-gain output feedback control system. The designed high-gain controller has simple structure and high robustness. However, from the viewpoint of practical application, it is important to consider a robust control scheme for controlled systems for which some of the assumptions of output feedback stabilization are not valid. In this paper. we deal with a design problem of the robust high-gain adaptive output feedback control for the above-mentioned class of nonlinear systems with uncertain nonlinearities and/or disturbances.

• The KIPS Transactions:PartA
• /
• v.10A no.6
• /
• pp.615-626
• /
• 2003

This paper proposes a mechanism for managing overload Introduced by excessive web requests in real-time web service system. The many previous mechanisms statically manage the overload and thus the dynamic characteristics are not reflected. This paper proposes a mechanism that models system load based on control theory approach and includes its dynamic characteristics. We design a controller that is able to meet performance requirement. A feedback control system is implemented applying the proposed mechanism and the stable operation of system is verified through various simulation environments.

• 제어로봇시스템학회:학술대회논문집
• /
• 1993.10a
• /
• pp.749-753
• /
• 1993

It is very difficult to control batch reactor with conventional linear controller due to its severe nonlinearity. To control the nonlinearity of batch reactor, we applied with relay feedback method and SOAS. The SOAS can be designed to work quite well, but it requires engineering effect and some knowledge about the process in order to get a satisfactory performance of the closed loop system For the applications to more reliable, further studies on robustness in various situations and process noises and would be required.

• 제어로봇시스템학회:학술대회논문집
• /
• 2002.10a
• /
• pp.48.3-48
• /
• 2002

1) Linear state feedback control design problem for plant with unknown deterministic disturbance is considered and a method to realize state feedback by using adaptive observer which estimates the unknown disturbance simultaneously is proposed. 2) From the viewpoint of practical application, we propose an extended adaptive observer with direct plant path from input to output, which is necessary to use the acceleration type sensors as plant output. 3) Theoretical result is confirmed by numerical simulation of 1-DOF vibration control system.

• Journal of the Korean Society for Precision Engineering
• /
• v.21 no.8
• /
• pp.171-179
• /
• 2004

The purpose of this study is to generate cycling motion for FES (functional electrical stimulation) using knee muscles only. We investigated the possibility by simulation. The musculoskeletal model used in this simulation was simplified as 5-rigid links and 2 muscles (knee extensor and flexor). For the improvement of the present feedforward control in FES, we included feedback path in the control system. The control system was developed based on the biological neuronal system and was represented by three sub-systems. The first is a higher neuronal system that generates the motion command for each joint. The second is the lower neuronal system that divides the motion command to each muscle. And the third is a sensory feedback system corresponding to the somatic sensory system. Control system parameters were adjusted by a genetic algorithm (GA) based on the natural selection theory. GA searched the better parameters in terms of the cost function where the energy consumption, muscle force smoothness, and the cycling speed of each parameter set (individual) are evaluated. As a result, cycling was implemented using knee muscles only. The proposed control system based on the nervous system model worked well even with disturbances.

• 전기의세계
• /
• v.30 no.2
• /
• pp.86-96
• /
• 1981

The problem of incomplet state feedback began to appear late in60's and early in 70's. This was motivated by inability to measure all the states of the system in practice. This survey paper traces the early developments in the subject through to the most recent achievement of gain-determining, pole-assignment, stabilization, and low sensitivity system design with output feedback.