• Asian-Australasian Journal of Animal Sciences
• /
• 제16권9호
• /
• pp.1332-1338
• /
• 2003

This study was undertaken to examine the influence of soluble non-starch polysaccharides on growth performance, mucin secretion, and endogenous amino acid flows in weaner pigs. Different levels (0, 4 and 7.5%) of purified corn arabinoxylan (AX) or barley $\beta$-glucan extract (BG) were substituted for cellulose in a purified diet based on starch, sucrose and enzymatically hydrolyzed casein. All diets contained titanium oxide as an indigestible marker. Each experimental diet was fed to five, 6-wk old weaner pigs for 21 days. Average daily gain (p<0.05) and feed conversion ratio (p<0.01) were improved with dietary inclusion of 7.5% AX and BG, indicating high degradation rates of AX and BG in pigs. Crude mucin contents and endogenous nitrogen flow were increased (p<0.05) with increased levels of AX, but not with BG. Numerical increases in endogenous amino acid flow (EAAF) were observed with increased levels of AX but no definite trend with BG. Endogenous amino acid flow in pigs fed mixed NSP diets (4% BG and 3.5% cellulose) was significantly higher (p<0.05) than those fed 7.5% BG diets. Among diets containing pure sources of soluble non-starch polysaccharides, endogenous amino acid flows were highest in 7.5% AX (p<0.05), intermediate in BG, and lowest in control diet. Increased flows (p<0.01) of threonine, proline and serine in pigs fed 7.5% AX diets are consistent with the increased flow of crude mucin determined in this treatment. In conclusion, mucin and endogenous amino acid flows were increased with dietary inclusion of AX, which could be related to its physicochemical property, particularly its high water-holding capacity. In contrast, $\beta$-glucan, due to its high degradation rate in pig, may be considered as unimportant factor in inducing mucin and endogenous amino acid secretions, at least at levels such as those used in this study.

• Asian-Australasian Journal of Animal Sciences
• /
• 제25권8호
• /
• pp.1153-1158
• /
• 2012

The objective of this study was to evaluate the antioxidant capacity of Lactobacillus plantarum ZLP001 and its effects on growth performance and antioxidant status in weaning piglets. The survival in hydrogen peroxide and free radical-scavenging activity of Lactobacillus plantarum ZLP001 were analysed in vitro. The Lactobacillus plantarum ZLP001 showed high viability in 1.0 mmol/L hydrogen peroxide and high scavenging ability against hydroxyl, superoxide anion, and DPPH (1,1-diphenyl-2-picrylhydrazyl) radicals which was dose dependent. Ninety-six weaning piglets were selected ($7.45{\pm}0.79kg$) and divided into three groups comprising of negative control without any supplementation, treatment group with supplemented $6.8{\times}10^7$ Lactobacillus plantarum ZLP001 CFU/g of diet, and positive control with antibiotic treatment (chlorotetracycline, 80 mg/kg diet). The results showed that Lactobacillus plantarum ZLP001 supplementation enhanced feed conversion rates in piglets compared with control (p<0.05). Supplementation of Lactobacillus plantarum ZLP001 increased the concentration of superoxide dismutase (p<0.05), glutathione peroxidase (p<0.01) and catalase in serum (p<0.10), while decreased the concentration of malondialdehyde (p<0.05). The present study implies that the strain Lactobacillus plantarum ZLP001 had high antioxidant ability and its supplementation improved the growth performance and antioxidant status of weaning piglets, so it can be considered useful to alleviate oxidative stress and increase productive performance of pigs.

• 대한기계학회논문집B
• /
• 제21권8호
• /
• pp.1068-1076
• /
• 1997

Emission control of acid exhaust gases from coal-fired power plants and waste incinerators has become an increasing concern of both industries and regulators. Among those gaseous emissions, SO$_{2}$ has been eliminated by a Spray Drying Absorber (SDA) system, where the exhaust gas is mixed with atomized limestone-water slurry droplets and then the chemical reaction of SO$_{2}$ with alkaline components of the liquid feed forms sulfates. Liquid atomization is necessary because it maximizes the reaction efficiency by increasing the total surface area of the alkaline components. An experimental study was performed with a laboratory scale SDA to investigate whether the scrubbing efficiency for SO$_{2}$ reduction increased or not with the application of a DC electric field to the limestone-water slurry. For a selected experimental condition SO$_{2}$ concentrations exited from the reactor were measured with various applied voltages and liquid flow rates. The applied voltage varied from -10 to 10 kV by 1 kV, and the volume flow rate of slurry was set to 15, 25, 35 ml/min which were within the range of emission mode. Consequently, the SO$_{2}$ scrubbing efficiency increased with increasing the applied voltage but was independent of the polarity of the applied voltage. For the electrical and flow conditions considered a theoretical study of estimating average size and charge of the atomized droplets was carried out based on the measured current-voltage characteristics. The droplet charge to mass ratio increased and the droplet diameter decreased as the strength of the applied voltage increased.

• 한국공작기계학회논문집
• /
• 제15권6호
• /
• pp.32-37
• /
• 2006

Micron size Co-alloy(T800) powder was coated on Inconel 718 by HVOF thermal spraying for the studies of the improvement of durability of high speed spindle by using Taguchi program for the parameters of spray distance, flow rates of hydrogen and oxygen and powder feed rate. The optimal coating process was determined by the studies of coating properties such as micro-structure, porosity, surface roughness and micro hardness. Friction and wear behaviors of coatings were investigated by sliding wear test at room temperature and $1000^{\circ}F(538^{\circ}C)$. At both room temperature and $538^{\circ}C$ the sliding wear debris and friction coefficients of the coating were drastically reduced compared with the surface of non-coated parent material. This shows that Co-alloy powder coating is highly recommendable for the durability improvement surface coating of high speed air-bearing spindle. At high temperature wear traces and friction coefficients of both coating and non-coating were drastically reduced compared with those of room temperature since the brittle oxides were formed easily on the surface, and the brittle oxide phases were attrited by the reciprocating sliding wear according to the complicated mixed wear mechanisms These oxide particles, partially melts and the melts play role as lubricant and reduce the wear and friction coefficient. This also shows that Co-alloy powder coating is highly recommendable far the durability improvement surface coating on the surface vulnerable to frictional heat such as high speed spindles.

• 한국수산과학회지
• /
• 제49권4호
• /
• pp.467-473
• /
• 2016

Several of our recent studies have focused on mass production of the marine Cladoceran Diaphanosoma celebensis, which can serve as a feed substitute for Artemia nauplii in the culture of larval marine fish. We compared the growth and survival rates of tiger puffer Takifugu rubripes fed D. celebensis with those fed Artemia. The group fed D. celebensis showed an increase in growth from 0.10 g to 1.78 g, while the group fed enriched Artemia had a growth from 0.10 g to 0.92 g. The survival rate of fish fed D. celebensis was 86.7% while that of fish fed enriched Artemia was 51.1%, indicating that the former group was superior to the latter both in growth and survival rate. Fatty acid analysis revealed that D. celebensis fed Nannochloropsis oculata and Schizochytrium sp. had an eicosapentaenoic acid (EPA) content of 16.42% and a docosahexaenoic acid (DHA) content of 3.93%. Meanwhile, juvenile tiger puffer fed D. celebensis had an EPA content of 9.12% and a DHA content of 10.69%. Juvenile tiger puffer fed D. celebensis had a similar n-3 highly unsaturated fatty acid content to that of tiger puffer fed enriched Artemia which had an EPA content of 5.82% and a DHA content of 15.90%, indicating that no additional enrichment was required.

• Asian-Australasian Journal of Animal Sciences
• /
• 제15권2호
• /
• pp.274-278
• /
• 2002

A culture system for lactating rat mammary acini was evaluated, where the primary indicator of performance was lactose secretion, measured by a sensitive bioluminescence assay. Lactose secretion was reduced by half (p<0.01) over the first 6 h of culture by overnight feed withdrawal (FW) from tissue donors but was sensitive to increased glucose concentration in the culture media (p<0.001) up to 30 mM. Lactose production of cells from fed donors over the first 6 h in culture in 30 mM glucose was 8.9 fmol/cell/h - a rate calculated to be about half that in vivo. No significant difference was shown in lactose secretion by cells from fed or FW rats over 6-24 h. Lactose secretion was 3.6 fmol/cell/h by cells from fed animals in 40 mM glucose concentration media over the 6-24 h culture period. Addition of insulin to the culture media had no effect on rates of lactose secretion while addition of prolactin and hydrocortisone, with or without insulin, significantly (p<0.001) decreased lactose production over both 0-6 h and 6-24 h culture periods. Lactose synthesis in vitro was significantly enhanced by aeration of the media during collagenase digestion of mammary tissue (p<0.05). No improvement in lactose secretion was effected by shaking of cells during culture, Matrigel coating of culture dishes or change in cell density over a range up to 2.5 million cells per ml.

• 멤브레인
• /
• 제21권3호
• /
• pp.236-246
• /
• 2011

본 연구에서는 기공의 크기가 $0.4{\mu}m$의 소수성 막인 폴리에틸렌 100가닥으로 모듈을 제작하여 직접접촉식과 동반기체식 막증류 과정에서 막의 양단의 온도차, 공급수의 염분농도, 그리고 냉각수/동반기체의 유량에 대해서 투과수의 플럭스를 측정하였다. 이론적으로는, 동반기체식 막증류는 직접접촉식 막증류 공정의 막의 투과측 표면과 냉각수 사이에 동반 기체층이 추가된 것으로 간주하였다. 이 동반기체층은 새로운 저항층과과 동반기체의 이동중 상변화된 수증기가 손실되는 것이 투과유속을 30% 정도 감소시키게 된다. 물질수지식을 이용하여, 기존의 식과는 다르게 보정계수(${\omega}$)를 넣어 직접접촉식 막증류와 동반기체식 막증류의 이론값을 실험값과 비교 분석하였다.

• 한국의류학회지
• /
• 제38권3호
• /
• pp.372-385
• /
• 2014

Lignin is an abundant natural polymer in the biosphere and second only to cellulose; however, it is under-utilized and considered a waste. In this study, lignin was fabricated into nanofibers via electrospinning. The critical parameters that affected the electrospinnability and morphology of the resulting fibers were examined with the aim to utilize lignin as a resource for a new textile material. Poly(vinyl alcohol) (PVA) was added as a carrier polymer to facilitate the fiber formation of lignin, and the electrospun fibers were deposited on polyester (PET) nonwoven substrate. Eleven lignin/PVA hybrid solutions with a different lignin to PVA mass ratio were prepared and then electrospun to find an optimum concentration. Lignin nano-fibers were electrospun under a variety of conditions such as various feed rates, needle gauges, electric voltage, and tip-to-collector distances in order to find an optimum spinning condition. We found that the optimum concentration for electrospinning was a 5wt% PVA precursor solution upon the addition of lignin with the mass ratio of PVA:lignin=1:5.6. The viscosity of the lignin/PVA hybrid solution was determined as an important parameter that affected the electrospinning process; in addition, the interrelation between the viscosity of hybrid solution and the electrospinnability was examined. The solution viscosity increased with lignin loading, but exhibited a shear thinning behavior beyond a certain concentration that resulted in needle clogging. A steep increase in viscosity was also noted when the electrospun system started to form fibers. Consequently, the viscosity range to produce bead-free lignin nanofibers was revealed. The energy dispersive X-ray analysis confirmed that lignin remained after being transformed into nanofibers. The results indicate the possibility of developing a new fiber material that utilizes biomass with resulting fibers that can be applied to various applications such as filtration to wound dressing.

• Journal of Preventive Medicine and Public Health
• /
• 제35권3호
• /
• pp.255-262
• /
• 2002

Objectives : To investigate the fetal cholesterol levels and related factors in a rural adult population. Methods : 3,207 adults(1,272 men and 1,935 women) were examined in 1997 Their heights, weights, and fasting serum total cholesterol levels were measured, and their body mass indices were calculated. A questionnaire interviewing method was used to collect risk factor data. Results : The mean value of total cholesterol were 190.5 mg/dl, and 198.8 mg/dl, and the age-adjusted prevalence rates for hypercholesterolemia (above 240 mg/dl) were 13.7% and 10.2%, in men and women, respectively. From simple analyses, age, educational level, coffee intake, amount of meat and food intake, waist circumference, waist-hip circumference ratio(WHR), and body mass index(BMI) were significant risk factors in men (p<0.05) relating to serum total cholesterol levels. In women, age, educational level, hypertension history, diabetes history, herbal drug history, amount of feed intake, alcohol consumption, waist circumference, WHR, BMI, and menopausal status were significant risk factors (p<0.05). In multiple linear regression analyses, waist circumference (p<0.01), BMI (p<0.01), and coffee intake (p<0.05) proved to be significant risk factors in men. Whereas, menopausal status (p<0.01), BMI (p<0.01), herbal drug history (p<0.01), amount of food intake (p<0.05), waist circumference (p<0.05), and alcohol consumption (p<0.05) were significant risk factors in women. Conclusions : The significant risk factors, for both men and women, relating to the serum total cholesterol were waist circumference and BMI. Thus, for the reduction of serum total cholesterol level, it is recommended that health education for the control of obesity should be implemented.

• 공업화학
• /
• 제8권6호
• /
• pp.967-972
• /
• 1997

접촉분해경유(LCO)와 dimethylsulfoxide(DMSO)수용액의 평형추출로부터 얻어진 추출상을 원료로 사용한 역추출에 의해 추출상중의 방향족의 회수를 검토했다. 역추출 용매의 선정을 위해, Benzene, Toluene, m-Xylene(mX), n-Hexane(Hx)과 n-Octane(Ot)을 용매로 사용하여 추출상-용매간의 분배평형을 측정한 결과, 추출상중의 방향족의 회수면에서 Hx이 가장 적절한 용매이었다. 또, Hx을 용매로 사용하여 평형 역추출을 행해 방향족의 회수에 대한 조작인자의 영향을 검토했다. 방향족에 대한 분배계수는 용매/원료(추출상) 질량비(S/F)(S/F를 변화시켜 얻어진 추잔상 혹은 추출상중의 질량분율)에 관계없이 일정했으나 수율은 S/F가 증가함에 따라 증가했다. 조작온도는 방향족의 분배계수와 수율에 영향을 미치지 못했다. 나프탈렌류 성분(탄소수:10~12)간에는 탄소수가 많을수록 분배계수 및 수율이 컸다. 또한, 회분 교반조를 사용하여 역추출을 행해 방향족 성분의 물질이동 속도를 측정했다.