• 청정기술
• /
• 제7권3호
• /
• pp.195-202
• /
• 2001

본 연구에서는 미량의 유기 염소계 화합물이 함유된 수용액에 대해 가교된 PDMS 막을 이용하여 투과증발 실험을 수행하였다. 실험 결과 공급액의 조성에 따라 트리클로로에틸렌의 플럭스는 선형적으로 증가하였으며 물의 플럭스는 약간씩 증가하는 경향을 보였다. 트리클로로에틸렌과 테트라클로로에틸렌의 비교 실험으로 트리클로로에틸렌이 보다 높은 분리 효율을 보임을 알 수 있었다. 조업온도의 증가는 트리클로로에틸렌의 분리효율에 좋은 영향을 미치지 않았으나 공급액의 유속은 플럭스의 큰 증가를 가져왔다. 높은 가교 밀도는 막으로의 용해도와 확산도를 감소시킨다. 가교 밀도에 트리클로로에틸렌의 플럭스와 선택도는 감소하였으며 이는 고분자 사슬의 움직임과 확산도의 감소로 설명이 가능하다.

• 한국물환경학회지
• /
• 제16권4호
• /
• pp.523-532
• /
• 2000

The purpose of this study was to investigate the effects of the hydraulic retention time (HRT) and organic loading rate (OLR) on microbial characteristics and treatment efficiency in sewage treatment using aerated submerged biological filter (ASBF) reactor. This reactor combines biodegradation of organic substrates by fixed biomass with a physical separation of biomass by filtration in a single reactor. Both simulated wastewater and domestic wastewater were used as feed solutions. The experimental conditions were a temperature of 17 to $27^{\circ}C$, a hydraulic retention time of 1 to 9hr, an organic loading rate of 0.47 to $3.84kg\;BOD/m^3{\cdot}day$ in ASBF reactor. This equipment could obtain a stable effluent quality in spite of high variation of influent loading rate. Total biomass concentration. biofilm thickness and biofilm mass increased an exponential function according to the increasing OLR. The relationships between water content and biofilm density were in inverse proportion. The percentage of backwash water to influent flow was almost 9%. The separation efficiency of biomass was the percentage of 91 to 92 in ASBF reactor. The sludge production rates in feed solutions of simulated wastewater and domestic wastewater were 0.14~0.26 kg VSS/kg BODrem, 0.43~0.48 kg VSS/kg BODrem, respectively.

• 한국정밀공학회지
• /
• 제2권2호
• /
• pp.43-59
• /
• 1985

In relation to the machinability of drilling operation, experiments were made to investigate the effect of cutting condition on static as well as dynamic cutting resistances in cutting plane carbon steel (SM 45 C) with H.S.S. twist drills. The results were as follows. 1) The static cutting resistances on carbon steel can practically be calculated by the following equations which were derived from experimental result. The deviation from the experimental values was less than 8% and 13% for cutting torque and thrust respectively. For cutting torque M: M=0.019 $H_B\;{f^{0.68}d^{1.68}$ For thrust T: T=0.400406 $r^{0.6}d^{0.68}$ + 0.1835 $H_BC^2$(where $H_B$: Brinnel hardness) 2) The static components of cutting resistance are increased exponentially with increasing drill diameter and feed rate. On the effect of drill diameter, the dynamic components of torque are decreased with increasing dirll diameter because of rigidity, the dynamic components of thrust being not effected with the changes. 3) As feed rates increase, the dynamic components of torque rather decrease although its changes on thrust components are unstable. 4) The static components of cutting resistance and dynamic component of torque are slightly decreased in accordance with the increase of spindle speed although its dynamic thrust components are not effected by the spindle speed.

• 한국수산과학회지
• /
• 제37권5호
• /
• pp.380-384
• /
• 2004

The toxic impact of parathion on bagrid catfish (Pseudobagrus fulvidraco) juvenile was examined 96 hr $LC_{50}$ value of parathion estimated as 1 90 mg/L. Chronically, bagrid catfish were exposed for 30 days to concentrations of parathion, i.e. 63, 95, 190 and $380\;{\mu}g/L$, representing 3.3, 5.0, 10.0 and $20.0{\%}$ of the 96 hr $LC_{50}$. Survival rate was significantly affected by the concentration over $63\;{\mu}g/L$ after 10 days. Growth rate, specific growth rate (SGR) and feed efficiency were reduced in time as concentration dependent manner. Growth rates of the exposed groups were significantly reduced as $28.06-60.63{\%}$ to the control fish, SGR was decresed as $1.50-4.72{\%}$ and feed efficiency was declined as $6.10-11.90{\%}$. It can be concluded that if p. lulvidraco is chronically exposed to parathion over $63\;{\mu}g/L$ concentration, the physiological damages might affect growth factors of the fish.

• Journal of Microbiology and Biotechnology
• /
• 제26권9호
• /
• pp.1551-1556
• /
• 2016

Broiler meat production worldwide has been plagued by lethal food-poisoning bacteria diseases, including listeriosis. A fatality rate of 15.6% was recorded in human beings in the EU in 2015. During 2013, a total of 200 poultry farm samples, including litter, chicken breast, farm feed, and drinking water, were collected to generate baseline data for the characterization of the genus Listeria in broiler poultry farms. Listeria spp. were detected in a total of 95 (47.5%) poultry farm samples. The isolates of Listeria spp. included L. innocua (28.5%), L. ivanovii (12.5%), L. welshimeri (4.5%), and L. monocytogenes and L. seeligeri (1% each). Listeria spp. contamination rates were higher in farm feed (70%), followed by litter (52.5%), chicken breasts (42.2%), and drinking water (10%). Almost all Listeria spp. isolates were resistant to more than three classes of antibiotics (multidrug resistant). Besides this, we observed a significant resistance level to penicillin and fluoroquinolone drugs. However, lower resistance levels were recorded for broad-spectrum cephalosporins. The inlA, inlC, and inlJ virulence genes were detected in almost all of the L. monocytogenes isolates. Thus, food safety management approaches and interventions at all stages of the broiler rearing cycle were needed to control cross-contamination and the zoonotic potential of listeriosis.

• Journal of Biosystems Engineering
• /
• 제23권3호
• /
• pp.259-270
• /
• 1998

An automatic seedling transplanter, employed an innovative plug-seedling feeder was developed by improving the problems of conversational feeding and transplanting mechanisms. With conventional methods, missing and damage rates of seedling were high for long seedlings over 20cm and also breaking seed-bed was frequently observed. Thus, a pushout-bucket slide-hopper type trandsplanter was devised and tested. Test results of picking and transferring accuracies of the developed transplanter are as follows : A prototype transplanter performed with 1.5% of missing rate. The deviations of horizontal feed ranged from -0.3mm to 2.8mm and averaged 0.673mm for the 128-hoe test tray : and ranged from -lmm to ＋3mm and averaged 0.785mm for the 200-hole test tray. The deviations could decrease with precise manufacturing and lightening the mechanism. The maximum and deviations of vertical feed were -2.3mm and + 1mm, respectively, for the 128-hole test tray ; and were ＋3mm and ＋2.5mm, respectively, for the 200-hole test tray. The missing rate, seeding bruise rate and seed-bed damage rate were esitmate to be 1.3％, 0.4% and 3.5％, respectively, with the developed automatic transplanter.

• Journal of Nutrition and Health
• /
• 제31권9호
• /
• pp.1404-1410
• /
• 1998

The purpose of this study was to investigate the effects of calcium intake levels on magnesium utilization in young and adult rats fed various levels of calcium(50, 100 or 200% of requirement) for 3 weeks. Feed intake, body weight gain, and feed efficiency ratios of the young group were significantly higher than those of the adult group. In calcium levels of tissues, serum calcium levels in young group were higher than in the adult group and kidney calcium levels in HCa(high-calcium group) were higher than in other groups. There was no significant difference in magnesium intake among age and diet groups. However, magnesium excretions through feces and urine in the adult group were higher than in the young group. Therefore, magnesium retention in the young group was higher than in the adult group. Especially in the young group, fecal magnesium excretion was increased with increasing levels of dietary calcium. Serum magnesium levels were lowest in YHCa(young 8t high-calcium) group, and there was no significant difference in liver and kidney levels among the calcium-diet groups. These results indicate that high calcium consumption promotes of fecal magnesium excretion and decreased magnesium retention rates in growing rats. Therefore, it is suggested that mineral interactions should be considered in the supplementation of dietary calcium intake for growth. (Korean J Nutrition 31(9) 1404-1410, 1998)

• Journal of Microbiology and Biotechnology
• /
• 제8권1호
• /
• pp.8-13
• /
• 1998

Animal cells in culture typically convert most of the glucose they consume into lactate. The accumulation of lactate, however, is commonly cited as one of the factors that inhibit cell growth and limit the maximum cell concentration that can be achieved in culture. The specific production of lactate and the amount of glucose converted to lactate can be reduced when cells are grown in a fed-batch culture in which the residual glucose concentration is maintained at low levels. Such a fed-batch culture was used to grow and adapt hybridoma cells into a low-lactate-producing state before changing into continuous culture. The cells reached and maintained a high viable cell concentration at steady state. In a similar manner, cells that were initially grown in batch culture and a glucose-rich environment reached a steady state with a cell concentration that is much lower. The feed composition and dilution rates for both cultures were similar, suggesting steady state multiplicity. From a processing perspective the desired steady state among those is the one with the least metabolite production. At such seady state nutrient concentration in the feed can be further increased to increase cell and product concentrations without causing the metabolite inhibitory effect typically seen in a cell culture. Controlling cell metabolism in a continuous culture to reduce or eliminate waste metabolite production may significantly improve the productivity of mammalian cell culture processes.

• 상하수도학회지
• /
• 제27권4호
• /
• pp.469-477
• /
• 2013

In order to investigate the influence of feed water inequity on the settling performance for parallel arranged upflow sedimentation basin in domestic G_WTP(Water Treatment Plant), CFD(Computational Fluid Dynamics) simulation were employed and ADV(Acoustic Doppler Velocimeter) measurements were carried out. From the results of both CFD simulations and ADV measurements, the differences among inlet flow rates to each inlet structure make turbulent energy dissipation uneven overall sedimentation basin. Especially local velocities in the near of both side wall were observed over the design overflow rate(74.4 mm/min). Also, it was confirmed that this inequity of inlet flow would exert an serious influence on the turbidity of settled water which is out from 8 troughs. Even though experimental velocities in full scale basin about 20% higher than the simulated, the results of ADV measurement were in good accordance with those of CFD simulations.

• 한국정밀공학회지
• /
• 제2권3호
• /
• pp.28-40
• /
• 1985

In this study, to check up on the effect of the components of cutting resistance upon friction between drill and inside wall of hole in drilling, the experiment was performed with individual specimen of carbon steel, cast iron, aluminium alloy under various cutting conditions: depth of hole, cutting speed, feed rate, shape and material of specimen. On the basis of the experimental results, the following conclusions are drawn; 1. The components of cutting resis- tance were increased in proportion to the increase of depth of hole owing to frictional resistance of drill margin and chip-jamming. 2. As feed rates increase, torque and thrust were increased. When comparing to the increasing rate for these components respecitively, thrust is higher tendency than torque. 3. As drill diameter increase, torque and thrust were increased. When comparing to the increasing rate for these components respectively, torque is higher tendency than thrust. 4. In the case of torque, the frictional resistance between drill margin and inside wall of drilled hole accounts for about 20 percent of carbon steel, 14 of cast iron, 10 aluminium alloy in drilling. But the effect of thrust force could be negligible. 5. Comparison between the theoretical and experimental results showed a close agreement so far as depth of hole is about three times of drill diameter. But there was a wide difference between them beyond the rane of three times, because of characteristics of the drilling process.