• 한국항해항만학회지
• /
• 제34권10호
• /
• pp.793-797
• /
• 2010

근해의 어족자원 고갈 및 수질오염은 수산양식 산업에 큰 영향을 미친다. 이러한 문제점을 해결하기 위하여 근해에서 외해로 양식장이 이동하고 있다. 외해 양식장은 근해보다 해상환경에 강인하게 개발되어야 하며, 안정적인 양식장 운영을 위해 원격 자동먹이 공급장치가 필요하다. 본 논문은 해상의 양식장에 적합한 원격 먹이공급시스템에 관하여 기술하고자 한다. 어류는 수온 및 어체 중량에 따라 먹이를 먹는 양이 변화한다. 해상 양식장의 경우 육상에 비하여 온도 변화가 크게 일어난다. 본 논문은 수온 및 어체 중량에 따라 먹이량을 계산하고 자동으로 먹이를 공급하는 시스템을 연구하였다. 모형을 활용한 먹이 공급 장치의 성능을 실험하였다.

• 한국지역사회생활과학회지
• /
• 제16권1호
• /
• pp.59-64
• /
• 2005

This study is to find out effects of hot water soluble extract from green tea, one of the Korean favorites, on the calcium metabolism and bone strength in body. To do so, calcium, phosphate, creatinine concentration and ALP activity in blood and the content of calcium and ash in the organ, the length, weight, strength in bone were measured. In addition, to find the calcium metabolism, the level of calcium intake, excretion, retention were measured. Twenty male Sprague-Dawley rats were divided into two groups and isoloated soy protein was provided as the source of protein and CaCO₃ was provided as the source of calcium. 0.5% hot water soluble extract from green tea was provided to the green tea groups and for the control group deionized water was provided. The results are as follows ; 1. There is no difference between the experimental groups in diet intake, weight gain, and the feed intake. 2. Feed efficiency ratio was low in the group which hot water soluble extract from green tea was provided. 3. There is no difference between groups the level of calcium, phosphorus, creatinine and ALP activity in serum. 4. There is no difference between groups weight, contents of ash and calcium in kidney and liver. 5. There is no difference between groups in calcium intake, absorption, excretion, and retention. 6. There is no difference between groups weight, length and strength in bone. In summary, when hot water soluble extract from green tea was provided with the amount of 150-200mg, which is taken when people generally drink as favorite tea, weight gain was reduced due to the decrease of feed efficiency ratio. However, it did not affect the availability of calcium in body at all. Thus, even if a big quantity of green tea powder or solid of hot green tea extract is not provided, the quantity obtained when people drink green tea lowers the feed efficiency ratio without reducing availability of calcium in body.

• 농업과학연구
• /
• 제50권2호
• /
• pp.249-256
• /
• 2023

The purpose of this experiment was to determine the influence of providing laying hens with extra feed on egg production and egg quality parameters. A total of 480 laying hens (38-weeks old), were divided into five treatment groups (eight replicate cages/treatment and 12 layer/replicate) according to their starting body weight (1.98 ± 0.05 kg) in this four-week feeding trial. Five different feed allowances of the same diet (105, 110, 115, 120, and 125 g·day^-1·bird^-1) were assigned to layers. Daily inspections of remaining feed (around 0.1g) and layer mortality (0%) showed no harmful impact of supplying extra feed to layers. Providing 120 and 125 g of feed per day to layers resulted in the highest final body weight, large-egg ratio, and improved yolk color among all treatment groups. Layers receiving 125 g of feed daily had the highest egg weight, but the highest egg production ratio was observed in layers receiving 110 g of feed/day. The additional supply of feed did not have a negative impact on the productive performance or egg quality of the layers. The provision of 125 g feed per day led to an improvement of large-egg ratio, egg weight, and yolk color, but likely led to obesity of the layers, which manifested as an increase in body weight and a decline in the egg production ratio. We concluded that 110 grams of feed was the proper quantity after taking into consideration the significance of the health of the laying hen to the overall production performance.

• International Journal of Industrial Entomology and Biomaterials
• /
• 제5권2호
• /
• pp.213-216
• /
• 2002

Food consumption and conversion efficiency of new bivoltine hybrids (CSR2$\times$CSR4 and CSR2$\times$CSR5) were studied under restricted feeding levels (10, 20 and 30% less quantity of mulberry leaves). The data were compared with a control fed with standard quantum of feed as per the recommendation. The nutritional indices parameters i. e. ingests, digesta, approximate digestibility (%) and reference ratio were recorded higher in control batches compared to less feed batches while nutritional efficiency parameters i. e., ECI and ECD to cocoon and shell were recorded significantly higher in restricted feeding level batches. This increase is attributed due to the physiological adaptation under nutritional stress condition.

• 한국초전도ㆍ저온공학회논문지
• /
• 제18권1호
• /
• pp.19-22
• /
• 2016

A Superconducting High Gradient Magnetic Separation (HGMS) system is proposed for treatment of feed-water in thermal power plant [1]. This is a method to remove the iron scale from feed-water utilizing magnetic force. One of the issues for practical use of HGMS system is to extend continuous operation period. In this study, we designed the magnetic filters by particle trajectory simulation and HGMS experiments in order to solve this problem. As a result, the quantity of magnetite captured by each filter was equalized and filter blockage was prevented. A design method of the magnetic filter was proposed which is suitable for the long-term continuous scale removal in the feed-water system of the thermal power plant.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2003년도 추계학술대회논문집
• /
• pp.245-250
• /
• 2003

This research conducted milling tests to study effects of cutting environment conditions of ball end mills on the characteristics of hard milling process. KP4 steels and STD11 heat treated steels were used as the workpiece and WC-Co ball end mill tools with TiAIN coated were utilized in the cutting tests. Dry cutting without coolant and semi-dry cutting using botanical oil coolant were conducted and MQL (Minimum Quantity Lubricant) device was used to spray coolant. Cutting forces, tool wear and surface roughness were measured in the cutting tests. Results showed that dry cutting of KP4 and hardened STD11 specimens produced better surface quality and wear performance than MQL spray cutting did.

• 한국정밀공학회지
• /
• 제26권1호
• /
• pp.43-50
• /
• 2009

Semi dry cutting known as MQL (Minimum Quantity Lubrication) machining is widely spreaded into the machining shops nowadays. The objective of this research is to suggest how to derive optimum cutting conditions for the milling process in MQL machining. To reach these goals, a bunch of finish milling experiments was carried out while varying cutting speed, feed rate, oil quantity, depth of cut and so on with MQL. Then, response surface analysis was introduced for the variance analysis and the regression model with the experimental data. Finally, desirability function based on regression model was used to obtain optimal cutting parameters and verification experiment was done.

• 소성∙가공
• /
• 제13권1호
• /
• pp.45-52
• /
• 2004

This research conducted milling tests to study effects of cutting environment conditions of ball end mills on the characteristics of hard milling process. KP4 steels and STD11 heat treated steels were used as the workpiece and WC-Co ball end mill tools with TiAlN coated were utilized in the cutting tests. Dry cutting without coolant and semi-dry cutting using botanical oil coolant were conducted and MQL(Minimum Quantity Lubricant) device was used to spray coolant. Cutting forces, tool wear and surface roughness were measured in the cutting tests. Results showed that dry cutting of KP4 and hardened STD11 specimens produced better surface quality and wear performance than MQL spray cutting did.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2004년도 추계학술대회논문집
• /
• pp.238-244
• /
• 2004

This research conducted milling tests to study effects of cutting environment conditions of ball end milts on the characteristics of high speed milling cutting process. KP4 steels and STD11 heat treated steels were used as the workpiece and WC-Co ball end mill tools with TiAIN coated were utilized in the cutting tests. Dry cutting without coolant and semidry cutting using botanical oil coolant by the MQL(Minimum Quantity Lubricant) device were conducted. Cutting forces, tool wear and surface roughness were measured in the cutting tests. Results showed that MQL spray cutting of KP4 and hardened STD11 specimens produced better surface quality and wear performance than dry cutting did.

• 산업기술연구
• /
• 제14권
• /
• pp.109-117
• /
• 1994

To satisfy the requirement for the precision and productivity of machine tools, we need the technique to predict the surface roughness of workpiece under various cutting conditions. The surface roughness is mainly influenced by the ideal roughness i. e., the roughness by feeding quantity and geometry of the tool. In this paper, the surface roughness is divided into three zones and the mathematical models of the three zones are obtained, in consideration of the feeding conditions and tool geometry. Using the mathematical models, we developed a program to calculate the maximum feeding quantity satisfying the required surface roughness of the workpiece. The program is used to calculate the maximum feed for two kinds of the bites used under the real cutting condition.