• 한국정밀공학회지
• /
• 제15권5호
• /
• pp.145-152
• /
• 1998

In this research, in order to predict the cutting force using a mechanistic model, specific cutting force was firstly obtained through the cutting experiments. Band sawing process is similar to a milling, that is multi-point cutting. Therefore it is not easy matter to evaluate specific cutting force. Thus, the thickness of workpiec was made smaller than one pitch of the saw in terms of fly cutting in the face milling process. Then the cutting force was predicted by analyzing the geometric shape of a saw tooth The tooth shape used in the research was raker set style that was generally used in band sawing. And a set of teeth is comprised of three teeth, those are ranked as left, straight and right. The mechanistic model was developed in this study considered those shapes of each tooth. From the validation experiments, the predicted cutting forces coincided well with the measured ones. Therefore the predicted cutting forces can be used for the adaptive control of saw engaging feed rate in the band sawing.

• 한국기계가공학회지
• /
• 제16권3호
• /
• pp.125-130
• /
• 2017

In this study, the influence of various factors on surface roughness was investigated using the Taguchi experimental method through high-speed machining processing. Feed rate, pitch, tool diameter, and depth of cut are widely applied to high-speed machining conditions for mold production. Each of these factors was implemented and classified into three levels; then, after high speed machining, surface roughness was measured, the S/N ratio was analyzed, and the influence on the surface roughness of control factors was analyzed quantitatively by ANOVA. Using this information, a mathematical model for predicting surface roughness was derived from multiple regression analysis. This mathematical model enables the surface roughness value after high-speed machining to be predicted at the production stage, before machining, for a wide range of machining conditions.

• 대한기계학회논문집B
• /
• 제25권12호
• /
• pp.1748-1755
• /
• 2001

The shell and tube heat exchangers were introduced to apply to a big capacity condenser and a high pressure feed water heater for power plant in the beginning of 1990s. Design and manufacturing technology fur shell and tube heat exchangers have been developed until now. But it is very difficult to calculate the expected performance characteristics of the shell and tube heat exchanger, because there are many design parameters to be considered according to internal structure and the shell side heat transfer mechanism complicately related to the design parameters. Design parameters to be considered in the design stage of shell and tube heat exchanger are shell and tube side fluids, flow rate, inlet and outlet temperature, physical properties, type of heat exchanger, outer diameter, thickness, length of tube, tube arrangement, tube pitch, permissive pressure loss on both sides, type of baffle plate, baffle cutting ratio. The propose of study is an analysis TEMA(Tubular Exchanger Manufacturers Association) E shell and tube heat exchanger performance with changing a number of baffles(3, 5, 7, 9, 11) and tubes(16, 20) and determined optimal baffle spacing.

• 한국통신학회논문지
• /
• 제22권8호
• /
• pp.1747-1754
• /
• 1997

국내 위성방송을 위한 DBS(Directcast Satellite) 수신용 헬리컬 어레이 안테나를 설계하였다. Coverage Area를 무주를 중심으로 서울까지 하기위해 안테나의 크기를 30cm로 하였고 어레이 소자의 개수는 168개로 하였다. 헬리컬 소자는 양호한 축비 특성과 안테나 높이를 고려하여 2회전과 $4^{\circ}$의 핏치각을 갖도록 하였다. 헬리컬소자의 어레이 열 간격은 $0.787{\lambda}$ 동열에서 헬리컬 간격은 $0.824{\lambda}$이며, 급전구조는 안테나의 높이를 줄이기 위해 방사형 도파관을 사용하였다. 설계 제작된 안테나의 측정된 복사특성은 축비를 제외하고 설계기준치를 만족하며 이론치에 거의 근접한 것으로 나타났다.

• 센서학회지
• /
• 제27권6호
• /
• pp.380-385
• /
• 2018

Recently, interest in baseball has been increasing as the level of international baseball games, the popularity of domestic leagues, and the number of players entering the MLB has increased. In this paper, we propose a pitching system that can be applied to both professional and amateur baseball. The pitching system consists of a control module using MSB764T PLC, a pitching mechanism including AC motors and a ball feed rail, an HMI using the CHA-070WR model, inverter, etc. To pitch the breaking balls, the two AC motors each use an inverter to independently control the speed. The implemented pitching system was experimented on, investigating ball speed and ball movement according to RPM using the BUSHNELL Velocity Speed Gun. Experimental results on ball speed are similar to the theoretical data and the measured data. From the experimental data, it is confirmed that the damping coefficient value for the pitching ball is about 0.98. In the case of the breaking ball, the larger the difference between the speeds on the sides of the ball and the faster the ball speed, the larger the bending degree.

• 한국정밀공학회지
• /
• 제10권2호
• /
• pp.54-65
• /
• 1993

The paper describes and alternative method based on a new idea to measure the circular movement of machining centers. ISO has employed three testing methods for the acceptance tests of machine tools; the first is a rotating one-dimensional probe method, the second is a two-dimensional probe and a master circular ring, and the third is a kinematic ball bar. The last two methods were proposed and introduced by W. Knapp and J. B. Bryan, respectively. The newly developed method is superior to above two methods; the rotating angle can be detected and the rotating radius is variable. Circular movement errors of machining centers were investigated by the analysis of data measured by R- .THETA. method. Followint observations are obtained 1) The errors which depend on positions, i.e., periodical errors by the pitch of ball screws, errors by compensation of backlash and errors by perpendicularity of X and Y-axis, were analyzed. 2) The errors which depend on NC control system, i.e., errors by the unbalance of position-loop-gaians, errors by velocity-loop-gains and errors by feed speeds, were quantiatively analyzed. 3) The method of extracting error information, which uses moving technique of averaging angle and fourier's analysis data mesured by the R- .THETA. method, was proposed.

• Computers and Concrete
• /
• 제19권1호
• /
• pp.59-68
• /
• 2017

This study focused on modeling the behavior of the compressive stress using the average strain and ultrasonic test results in concrete. Feed-forward backpropagation artificial neural network (ANN) models were used to compare four types of concrete mixtures with varying water cement ratio (WC), ordinary concrete (ORC) and concrete with short steel fiber-reinforcement (FRC). Sixteen (16) $150mm{\times}150mm{\times}150mm$ concrete cubes were used; each contained eighteen (18) data sets. Ultrasonic test with pitch-catch configuration was conducted at each loading state to record linear and nonlinear test response with multiple step loads. Statistical Spearman's rank correlation was used to reduce the input parameters. Different types of concrete produced similar top five input parameters that had high correlation to compressive stress: average strain (${\varepsilon}$), fundamental harmonic amplitude (A1), $2^{nd}$ harmonic amplitude (A2), $3^{rd}$ harmonic amplitude (A3), and peak to peak amplitude (PPA). Twenty-eight ANN models were trained, validated and tested. A model was chosen for each WC with the highest Pearson correlation coefficient (R) in testing, and the soundness of the behavior for the input parameters in relation to the compressive stress. The ANN model showed increasing WC produced delayed response to stress at initial stages, abruptly responding after 40%. This was due to the presence of more voids for high water cement ratio that activated Contact Acoustic Nonlinearity (CAN) at the latter stage of the loading path. FRC showed slow response to stress than ORC, indicating the resistance of short steel fiber that delayed stress increase against the loading path.

• 대한기계학회논문집A
• /
• 제41권4호
• /
• pp.251-255
• /
• 2017

미세 패턴의 기계적 가공에서는 버의 발생이 불가피하고, 패턴과 버의 크기가 매우 작아 이를 구분하기 어렵다. 본 연구에서는 turning machine을 이용하여, 원통형 공작물의 옆면에 패턴의 피치와 높이가 각각 60, $1{\mu}m$인 마이크로 패턴을 제작하고, 패턴의 형상을 이용하여 버의 형상과 생성 메커니즘을 정의하였다. 또한, 자기연마 디버링을 이용하여 마이크로 패턴의 정밀도를 높이고자 하였다. 그 결과, 미세패턴의 제작 시, 공구의 이송방향에 따라 버의 생성방향이 결정됨을 확인할 수 있었다. 또한, 자기연마디버링 공정에서 자속밀도와 공구의 회전속도가 각각 40mT, 1600rpm일 때, 패턴의 높이는 $1.018{\mu}m$로 측정되었으며, 자기연마 디버링에 가장 적합한 조건임을 알 수 있었다.

• 대한환경공학회지
• /
• 제31권11호
• /
• pp.1025-1032
• /
• 2009

본 연구에서는 세탁소에서 배출되는 휘발성유기화합물을 흡착처리하는 공정의 개발 가능성을 검토하였다. 휘발성 유기화합물을 흡착하는 재료로는 핏치계 활성탄소섬유를 선택하였고, 흡착제의 재생방법으로는 전기변동법을 사용하였다. 용제는 트리클로로에틸렌과 톨루엔을 대상으로 하였으며 활성탄소섬유와 용제의 종류에 따른 파과곡선과 흡착량을 비교 검토하였다. 흡착량을 증대시키기 위하여 다양한 방법으로 활성탄소섬유를 전처리하였다. 또한 흡착이 완료된 활성탄소섬유의 재생에 필요한 온도와 허용전압을 측정하였다. 그 결과 트리클로로에틸렌의 흡착에는 미세 기공이 잘 발달된 활성탄소섬유가 우수한 성능을 나타낸 반면 톨루엔의 경우에는 비표면적이 큰 흡착제가 우수한 성능을 보였다. 활성탄소섬유는 흡착제 무게의 41~54%에 해당하는 트리클로로에틸렌을 흡착하였으며 유입되는 휘발성유기화합물의 농도가 높아지면 완전흡착시간은 급격히 짧아지고 흡착량은 서서히 감소하여 낮은 농도의 휘발성유기화합물을 처리하는 것이 보다 유리한 것으로 나타났다. 활성탄소섬유 표면의 산소작용기를 조절한 결과, 진공열처리를 한 활성탄소섬유의 톨루엔 흡착성능이 가장 우수한 것으로 나타나, 톨루엔의 흡착은 빈자리 탄소(vacant carbon site)가 흡착점이라고 판단된다. 흡착된 용제는 $150^{\circ}C$에서 대부분 탈착되었다.

• 한국전자파학회논문지
• /
• 제17권3호
• /
• pp.249-258
• /
• 2006

본 논문에서는 새로운 구조의 헬리컬 안테나를 UHF 대역 RFID 리더용 안테나로 제안하였다. 제안된 헬리컬 안테나는 안테나의 선로가 다각 구조의 외부단에서 내부단으로 감겨 들어가는 형태를 가져 복사 이득과 복사 패턴의 조절이 용이하고, 감긴 선로의 수평 회전각과 수직 회전각을 조절하여 양질의 원형 편파를 복사할 수 있다. 세부적인 안테나 설계 변수는 Pareto 유전자 알고리즘을 사용하여 RFID 리더 특성에 적합하도록 최적화 시켰다. 최적화된 RFID 리더 안테나들 중 2단 구조의 표본 안테나를 선별하여 유연한 유전체인 종이 위에 스트립 선로로 제작하였으며, 제작된 안테나의 측정간을 시뮬레이션 결과와 비교, 분석하였다. 제작된 안테나는 kr=3.2의 크기를 가지며 21.4 %의 반사 손실 대역폭, 31.9 %의 원형 편파 대역폭, 약 $5.5m^2$의 인식 영역 특성을 보였다. 안테나 선로의 전류 분포와 선로 구조의 민감도를 조사한 결과, 급전 부위 근처에서 선로가 $0.25{\lambda}$ 정합기로 동작하게 되어 광대역의 정합 특성을 가지며, 꺾이는 스트립 선로 구조는 최적의 진행파를 형성하여 양질의 원형 편파를 발생시키는 것을 확인하였다.