• 한국정밀공학회지
• /
• 제25권2호
• /
• pp.96-104
• /
• 2008

An egg grading machine is composed of many mechanisms of which functions are to carry eggs to the bucket in that sensors are located to categorize eggs by their weight, to transfer eggs from the basket of packer holder to the mold tray, to feed the mold tray dispenser after egg chairs are filled with eggs. This paper deals with the analysis and new design of packer holder mechanism of which function is transfer eggs vertically from the bucket conveyor to the mold tray dispenser. Egg is fragile to impact so in designing packer holder mechanism it is necessary to estimate moving speed, acceleration and impact when eggs are touched by any links of mechanism and mold tray dispenser. A new packer holder mechanism is proposed in this paper, which use quick return mechanism composed of 6 links with pin and contact joints.

• 한국항해항만학회지
• /
• 제34권10호
• /
• pp.793-797
• /
• 2010

근해의 어족자원 고갈 및 수질오염은 수산양식 산업에 큰 영향을 미친다. 이러한 문제점을 해결하기 위하여 근해에서 외해로 양식장이 이동하고 있다. 외해 양식장은 근해보다 해상환경에 강인하게 개발되어야 하며, 안정적인 양식장 운영을 위해 원격 자동먹이 공급장치가 필요하다. 본 논문은 해상의 양식장에 적합한 원격 먹이공급시스템에 관하여 기술하고자 한다. 어류는 수온 및 어체 중량에 따라 먹이를 먹는 양이 변화한다. 해상 양식장의 경우 육상에 비하여 온도 변화가 크게 일어난다. 본 논문은 수온 및 어체 중량에 따라 먹이량을 계산하고 자동으로 먹이를 공급하는 시스템을 연구하였다. 모형을 활용한 먹이 공급 장치의 성능을 실험하였다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 추계학술대회
• /
• pp.934-939
• /
• 2004

This paper propose a study on the Feed Characteristics of Twist Friction Driver. We are using Twist Friction Driving mechanism system. The system consists of Twist Friction Driver elements such as driving shaft, driven roller, Spring for pre-load, Air bearing guide, Servo motor, and measuring devices such as Encoder of Servo motor, Laser interferometer, LVDT . The Twist Friction driver is mechanically simple and very quiet at high speed, and has low pre-load. So The Twist Friction driver can materialize an ultra precision feed-resolution. The feed characteristics of the driver is determined by slip and angular error, backlash.

• 한국소음진동공학회논문집
• /
• 제23권2호
• /
• pp.160-166
• /
• 2013

This paper proposes a driver supportive device with haptic cue function which can be applicable for vehicles adopting manual transmission system to transmit gear-shifting information to a driver by kinesthetic forces. This haptic cue function is implemented on accelerator pedal by utilizing magnetorheological(MR) fluid and clutch mechanism. In order to achieve this goal, an MR clutch mechanism is devised to be capable of rotary motion of accelerator pedal. The proposed MR clutch is then optimally designed and manufactured under consideration of spatial limitation of vehicles. After transmission torque is experimentally evaluated according to field intensity. The manufactured MR clutch is integrated with accelerator pedal and electric motor to establish the haptic cue device. Control performances are experimentally evaluated via a simple feed-forward control algorithm.

• 한국정밀공학회지
• /
• 제29권5호
• /
• pp.494-499
• /
• 2012

Reliable results can't be derived without the notion of measurement uncertainty. The reason is that the measured value includes a lot of uncertain factors. Finding the factor that affect the measurement of parameter is important for estimation of measurement uncertainty. In this paper, the evaluation of uncertainty analysis about positioning accuracy measurements of high precision feed mechanism is presented to evaluate the important factors of uncertainty.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2000년도 춘계학술대회 논문집
• /
• pp.699-702
• /
• 2000

In order to use a parallel device fur machine tool feed mechanism, it is very important to analyze its stiffness over the workspace. Generally, the stiffness of a rod varies with its length. In this paper, the stiffness of the leg is modeled as a linear function. With the linear stiffness model, the methods that can determine stiffness bounds and max/min stiffness directions are presented utilizing eigenvalues and eigenvectors of the stiffness matrix. The stiffness variation along a tool-path and stiffness mapping over a workspace are presented with cubic-shaped parallel device which is originally designed for machine tool feed mechanism.

• 한국정밀공학회지
• /
• 제19권7호
• /
• pp.163-170
• /
• 2002

This paper presents some measures far the optimization of the thermal behavior of linear motors, which are used as a high speed feed mechanism in machine tools. Thermo-Sandwich-Construction using two cooling circuits and an insulation layer shows an effective cooling system for linear motors. Conducting sheet can be also used to reduce heat flow from linear motor to machine table. Cooling pipe is a simple and effective cooling system for the secondary part of synchronous linear motor. Through the combination of the Thermo-Sandwich-Construction, conducting sheet and cooling pipe the thermally optimized linear motor shows a well improved thermal behavior in comparison with the prototype motor.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 추계학술대회 논문집
• /
• pp.1025-1028
• /
• 2002

In this paper, a micro-turning lathe is introduced for micro machining of aluminum rod. To give feed motion, stepwise motion[2] actuators are used instead of the conventional inchworm mechanism. These are consisted of two Piezoelectric ceramics; one is for feeding the slider, and the other is for clamping the slider in the guide way of the body. The guide is V-form. The linearity and positional accuracy of the actuators is good enough far high precision motion. Since the system is more compact than the conventional system using three Piezoelectric ceramics, it is applicable for the micro-machine or MEMS unit. To fabricate the lathe, a small spindle unit with ball bearings of diameter of 10 millimeter is built-up on the top the slider. The motion is feed backed with miniaturized linear encoder attached each axis slider. The diamond tool bite is used for cutting tool. The machining is tried to make small diameter rod. The possible diameter that can be machined in this machine is presented as well as chip formation, surface roughness, and machinability.

• 한국정밀공학회지
• /
• 제17권12호
• /
• pp.20-25
• /
• 2000

• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 1993년도 Proceedings of International Conference for Agricultural Machinery and Process Engineering
• /
• pp.768-778
• /
• 1993

The system is designed for the production and processing of feed, fertilizer, sugar , and grain. It can be used to weigh and transport automatically their pellet, power or nonstickness materials. In this system, we use discontinuous totalising automatic weighing instruments to weigh materials. It is a closed-cycle control system controlled by industrial controlling computer STD bus. The system used for processing grain and feed can improve the quality of products , carry out scientific management, increase productivity and decrease the intensity of labour