• Journal of Korea Society of Industrial Information Systems
• /
• v.6 no.4
• /
• pp.1-5
• /
• 2001

This study presents an electronic catalogue based cutting parameter selection system using MS Access software. The proposed system has been designed to electronically select proper cutting conditions based on the stored data base. The existing approaches used in most small and medium sized companies are basically to use manufacturing engineer's experience or to find the recommended values from the manufacturing engineer handbook. These processes are often time consuming and inconsistent, especially when a new engineer is involved. Therefore, this study proposes a simple, yet quick and consistent electronic catalogue based cutting parameter selection method which uses MS Access in terms of programming and database implementation. Consequently, the proposed system could automatically generate the proper cutting conditions (feed, depth of cut, and cutting speed) as soon as the input data (proper information about the tool and work material) is given. Thanks to the simple structure and popularity of the MS Access, the engineer could be quickly accustomed to the system and easily modify/insert/delete the database if necessary.

• Smart Structures and Systems
• /
• v.12 no.5
• /
• pp.501-521
• /
• 2013

This paper is concerned with static and dynamic shape control of a laminated Bernoulli-Euler beam hosting a uniformly distributed array of resistively interconnected piezoelectric patches. We present an analytical one-dimensional model for a laminated piezoelectric beam with material discontinuities within the framework of Bernoulli-Euler and extent the model by a network of resistors which are connected to several piezoelectric patch actuators. The voltage of only one piezoelectric patch is prescribed: we answer the question how to design the interconnected resistive electric network in order to annihilate lateral vibrations of a cantilever. As a practical example, a cantilever with eight patch actuators under the influence of a tip-force is studied. It is found that the deflection at eight arbitrary points along the beam axis may be controlled independently, if the local action of the piezoelectric patches is equal in magnitude, but opposite in sign, to the external load. This is achieved by the proper design of the resistive network and a suitable choice of the input voltage signal. The validity of our method is exact in the static case for a Bernoulli-Euler beam, but it also gives satisfactory results at higher frequencies and for transient excitations. As long as a certain non-dimensional parameter, involving the number of the piezoelectric patches, the sum of the resistances in the electric network and the excitation frequency, is small, the proposed shape control method is approximately fulfilled for dynamic load excitations. We evaluate the feasibility of the proposed shape control method with a more refined model, by comparing the results of our one-dimensional calculations based on the extended Bernoulli-Euler equations to three-dimensional electromechanically coupled finite element results in ANSYS 12.0. The results with the simple Bernoulli-Euler model agree well with the three-dimensional finite element results.

• International Journal of Advanced Culture Technology
• /
• v.7 no.4
• /
• pp.125-136
• /
• 2019

The radish skin and radish greens are an edible part of the radish. But they are removed before eating the radish and used as a byproduct or an animal feed material because of their tough and rough texture. Melanin is a pigment that gives colour to our skin. But increased production of melanin can turn into benign or malignant tumours. These days due to global warming, the amount of Ultra violet (UVB) rays has been extensively increased with sunlight. Due to this, a phenomenon called exogenous photo aging is widely observed for all skin colour and types. As a result of this phenomenon, a set of enzymes called matrix metalloproteinases (MMP's) that serves as degradation enzymes for extracellular matrix proteins mainly collagen is increased, causing depletion in collagen and resulting in early wrinkles formation. Therefore in our study we used the murine melanoma cell line B16/F10 to study the melanogenesis inhibition by Heated radish extract (HRE) in vitro and we used HRM-2 hair less mice exposed to artificial UVB for checking the efficacy of Heated radish extract in vivo. Furthermore, we prepared a 3% Heated radish extract (HRE) cream and checked its effects on human skin. Our results have clearly demonstrated that Heated radish extract (HRE) have potently suppressed the tyrosinase activity and melanin production in B16/F10 cells. It had also reduced the expression of components involved in melanin production pathway both transcriptionally and transitionally. In in vivo studies, HRE had potently suppressed the expression of MMP's and reduced the wrinkle formation and inhibited collagen degradation. Moreover, on human skin, ginseng cream increased the resilience, skin moisture and enhanced the skin tone. Therefore in light of these findings, we conclude that HRE is an excellent skin whitening and antiaging product.

• Journal of Life Science
• /
• v.10 no.1
• /
• pp.14-21
• /
• 2000

The experiments were performed using both batch and continuous column reactors. Batch biodegradation studies were performed under aerobic conditions to determine the biodegradable fraction of the natural organic matter (NOM) source. NOM source was evaluated for its biodegradability at three different UV irradiation conditions and compared to its biodegradability without UV irradiation. In continuous experiments, system operating parameters of empty bed contact time (EBCT), recycle ratio, and influent concentration affected the extent of biofiltration in the biofilters. The effluent UV254/DOC ratios fro the biologically active columns were consistently lower than the influent values, which indicated that the dissolved organic carbon (DOC) removed by biodegradation was not a significant part of the UV-absorbable material. The increase in UV254/DOC ratio was caused by the DOC decrease across the biofilter because there was essentially no difference between the feed and effluent UV254 absorbance values over time. The results of this research showed that biofiltration was an effective method for removing the biodegradable fraction of NOM from water supplies.

• Journal of Environmental Science International
• /
• v.25 no.5
• /
• pp.645-654
• /
• 2016

For the purpose of reuse the wasted by-products from the skate process to the health functional food or medicinal material, chondroitin sulfate was extracted from the skate cartilage with the method of hydrolysis with protease enzyme, and the contents of chondroitin sulfate and hydrolyzed protein were measured qualitatively and quantitatively. The effects of chondroitin sulfate on body weight or liver weight changes, hepatotoxicity elimination and anti-inflammatory actions were measured from in vivo test with feed-treated mice. From the hydrolytic extraction of skate cartilage with the mixture of 1% alcalase and 1% protease for 4 hours, the extraction yield of chondroitin sulfate was about 32.55%. The content and molecular weight of chondroitin sulfate was 26.63% and $2.85{\times}10^5Da$., respectively and the content ratio of chondroitin sulfate to protein was measured to 1 to 2.76 with gel permeation chromatography. For the odor component, trimethylamine decreased about 30% but almost not ammonia from chondroitin sulfate with the treatment of activated carbon. From the feeding chondroitin sulfate to mice, the control effect of body and liver weights decrease was measured, anti-inflammatory action and hepatotoxicity elimination action were also measured. From these results, process operation conditions for manufacturing of chondroitin sulfate were suggested.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.9
• /
• pp.4149-4155
• /
• 2013

High speed machining for higher cutting speed and feedrate lead to a increase of surface quality and material removal rate. This paper presents a study of the influence of cutting conditions on the vibration characteristics obtained by machining with face milling cutter for high speed machining. In this paper, Taguchi experimental design method which is based on orthogonal array table was applied to study vibration characteristics with high speed face milling cutter. The experimental conditions used orthogonal array of $L_{27}(3^{13})$. In this work, design and analysis of experiments is conducted to study the effects of these parameters on the vibration by using the S/N ratio, analysis of variance. Four cutting parameters namely, feed rate, champer length, cutting speed, and depth of cut were optimized with consideration of vibration characteristics.

• Korean Journal of Poultry Science
• /
• v.7 no.2
• /
• pp.18-27
• /
• 1980

Infectious bursal disease, so called Gumboro disease, is found world-wide in areas of intensive poultry farming. The clinical signs of the disease are very indicative, but most infections occur unnoticed due to the age of infection of chicken as well as the degree of virulence of virus affected. Edematous and hemorrhagic lesions in BF at early course of infection and the complete atrophies of BF in later are the most characteristic. The infection is considered highly contagious by direct contact, by fecal material and by contaminated feed and water. The virus is also highly resistant in environment and belongs to Diploma virus with size of 55 to 60nm of Ribovirus group. IBDV grows in embryos, embryonic cells and BF of susceptible chickens. Immune-diffusion using agar gel is the method of a choice to determine IBDV infection in chickens. Maternal immunity is very effective in protecting chickens of critical age when IBDV infection severely damages the function of BF. Immunosuppressive effect of IBDV causes more production losses than direct effects of clinical disease of IBD. Inclusion body hepatitis, infectious anemia and gangrenous dermatitis syndrome are the disease associated with the immunosuppressive condition of chickens.

• Hwankyungkyoyuk
• /
• v.11 no.1
• /
• pp.151-164
• /
• 1998

Conclusion and the improvement plan according to the survey on recycling wastes in 'the program of woman and environmental education' mainly for the chairwomen of the women's association of the apartment house in City and County of Chungchongnamdo during the first half of 1998 (from March tp April) are as follows. 1. Conclusion 1) It showed that the rate of recognition for recycle has no difference by regional groups and the rate of recognition is 57.4% but they mainly know vaguely or they do not know. 2) It showed that the rate they do not know how the separated wastes are recycled is 30.4% and the scope of their knowledge is approximative.(52.6%) 3) It showed that it is the housewives who mainly do the separate garbage collection (72.7%) and 19.1% of the people have no interest in the separate discharge. 4) It showed that the rate they filter the garbage or remove water from the garbage at house is 53.1%. And 20% of the people in the urban region dump untreated wastes but 8.5% of the people in the rural region do the same, so the rate of using garbage in the rural region is higher than that in the urban region. 5) It showed that the separate state of the garbage is 29.2% for the removal of toothpick and paper and 47.4% for the removal of vinyl and stopper. 6) It showed that 66.7% of the motive for recycling waste is the education activity for environment by the women's association and SAEMAEUL association and 34.5% of that is the influence of TV and radio. 7) It showed that the rate of making compost and feed using garbage in the rural region is higher than that in the urban region and in some urban regions, the rate they sprinkle the garbage in provisional compost state on the floor garden is high. 8) It showed that the recognition rate for the material of separately collected garbage corresponding to the separate waste system of 5-6 classification is 12.5% 9) It showed that the major variable which has an effect on the recycle is the education activity for environment by the neighborhood meeting(P<0.05) and by the women's association of saemaeul activity(P<0.05)

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.20 no.10
• /
• pp.19-26
• /
• 2021

In fine-particle injection processing, hard fine particles, such as silicon carbide or aluminum oxide, are injected - using high-pressure air, and a small amount of material is removed by applying an impact to the workpiece by spraying at high speeds. In this study, a two-axis stage device capable of sequence control was developed to spray various shapes, such as circles and squares, on the surface during the micro-particle jetting process to understand the surface-shape micro-particle-processing characteristics. In the experimental device, two stepper motors were used for the linear movement of the two degree-of-freedom mechanism. The signal output from the microcontroller is - converted into a signal with a current sufficient to drive the stepper motor. The stepper motor rotates precisely in synchronization with the pulse-signal input from the outside, eliminating the need for a separate rotation-angle sensor. The major factors of the processing conditions are fine particles (silicon carbide, aluminum oxide), injection pressure, nozzle diameter, feed rate, and number of injection cycles. They were identified using the ANOVA technique on the design of the experimental method. Based on this, the surface roughness of the spraying surface, surface depth of the spraying surface, and radius of the corner of the spraying surface were measured, and depending on the characteristics, the required spraying conditions were studied.

• International journal of advanced smart convergence
• /
• v.8 no.1
• /
• pp.113-125
• /
• 2019

The radish skin and radish greens are an edible part of the radish. But they are removed before eating the radish and used as a byproduct or an animal feed material because of their tough and rough texture. This study was conducted to investigate the effect of supercritical heat-treated radish-extract on UV-induced HRM-2 wrinkled mouse animal model on anti-aging wrinkles. Supercritical heat-treated radish-extract was applied on the back of seven-weeks old HRM-2 mice. The effect of HRE on skin thickness, elasticity and wrinkle formation of the mice was observed by using UVB lamp to induce melanogenesis and wrinkle formation. As the result, increased depth of wrinkles was observed in the negative control group in comparison to the normal group. In contrast, decreased depth of wrinkles was observed in the radish-extract-free group compared to the negative control group. In the study of the effect of radish-extract on wrinkle-formation related gene expression and protein what protein expression, MMP-2 and MMP-9 gene expression significantly increased in the negative control group compared to the normal group. The gene expression reduced in dependence to the mass of radish-extract treated. Similar to quantitative results of mRNA expression, the expression of MMP-2 protein increased as a result of UVB-irradiation. The MMP-2 expression was inhibited in dependence to the mass of radish-extract treated. In conclusion, the supercritical heat-treated radish-extract has an effect on improving skin wrinkles not only when it is applied to the skin but also when orally ingested. Thus, it can be effectively used as a composition to health functional products. Therefore we can also conclude that radish a food that does not show any side-effects even upon long-term intake can reduce wrinkle formation as well as improve skin elasticity when taken regularly for a long period.