• The Journal of the Korea institute of electronic communication sciences
• /
• v.14 no.3
• /
• pp.461-466
• /
• 2019

In this paper, we have studied the improvement of gain and bandwidth characteristics by using double feeding and L-shaped inset feed line matching circuit in microstrip stacked patch antenna which is widely used to broaden the gain of general microstrip antenna. The proposed structure is composed of two feeding edges of the main patch antenna, each of them are connected to a feeding line having an L shaped inset feeder. And the parasitic patch is placed at a proper distance above the main patch. The size of the main patch is designed so that the resonance frequency is close to the center frequency of the target frequency band. The experimental results show that the bandwidth was increased more than 180MHz in the 2.3-2.7 GHz band, which is more interesting than the single feed, and the gain improvement of 2.5dBi was obtained at 2.7GHz.

• Journal of Korea Planning Association
• /
• v.54 no.6
• /
• pp.68-79
• /
• 2019

The purpose of this study is to propose a transit accessibility analysis method based on temporal variability of travel time. In this study, transit accessibility was defined in three levels (in transit route, spot and region unit) to present findings from different spatial scopes. Recently, Jeju special self-governing province reorganized bus system of the island. To compare transit accessibility before and after transit policy implementation, the reorganized bus system of Jeju special self-governing province was selected as a case study. This study used General Transit Feed Specification (GTFS) data format as storage public transit information, and calculated travel time using ArcGIS GTFS networks analysis tools. In the analysis of individual transit route level, we found the 3 types of accessibility changes which is increments, no significant changes and reductions and these results come from transit route change (number of transfer, distance change) rather than changes of vehicle interval. We found increases of inflow and outflow speed in most target spots and overall transit accessibility has been substantially improved in Jeju island. This study implies that accounting for temporal variability of travel time in accessibility analysis can result in more useful and sophisticated accessibility information in decision-making processes.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2022.10a
• /
• pp.97-97
• /
• 2022

The yield characteristics of corn for feed by sowing period and the crude protein, crude fat, and coarse flour contents of grain in the harvesting period were compared. The varieties are Kwangpyeongok(KPO), Dapyeongok(DPO) and Pyeonggangok(PGO), and cultivation was tested by the National Food Engineering Department and the Central Crop Department. It was sown at a planting distance of 70×25cm on April 15, June 14, and July 15, 2021, and the amount of fertilizer was applied through soil inspection. For the growth characteristics, plant height, biomass and grain weight were investigated after 50 days of sowing, and general components were analyzed by drying and pulverizing each seed. Compared to the results of sowing in April, which is the right time to sow corn, all three varieties sown on June 14 showed an increase in biomass. In the case of sowing on July 15, the fresh weight of KPO and DPO decreased, and the grain weight of KPO and PGO decreased by 10-20% compared to the sowing in April. There was no significant difference in the crude protein content of grain according to the sowing seasons in April and June, but decreased in the corn sown in July. The crude fat content was highest in KPO sown on June 14 and DPO sown on July 15. Combining the yield and general composition results, it is thought that the cultivation of corn for feed in Suwon in the central part can be sown by mid-June.

• Journal of Veterinary Clinics
• /
• v.16 no.2
• /
• pp.381-388
• /
• 1999

These investigations were performed to determine the causes of the reproductive disorders of the sows in a pig farm which was located at the distance 36m away from the detonation spot. The reproductive problems of the sows such as abortion and infertility occurred after consecutive detonation and use of heavy equipments to build 6 piers of the bridge for the expressway between Jinju and Taeieon during the period from July 1997 to October 1998. 1. The management condition of the farm, microorganism in the feed, inbreeding, hematological conditions, and viral agent causing abortion were not proved as the factors of the occurrence of abortion and infertility in the pig farm. 2. Theoretical concussion values according to the average amount of explosive per detonation were 1.16 kine for minimum amount (3.6 kg) and 3.45 kine for maximum amount(12.5 kg) of explosive, and the theoretical sound values were accordingly 92.29 decibel for minimum amount and 101.76 decibel for maximum amount of explosive, respectively, in the case of 36m distance between the detonation spot and pig farm. The frequency of detonation in a day was 7 times with interval of 15 minutes. 3. The occurence of infertility in the farm was 57.3% during the period of construction from July 1997 to August 1998. 4. In comparison of body weight of piglets between the damaged and not damaged farms, growth of piglets at the damaged farm was shown to be delayed over 30 days than those of not-damaged farm. In conclusion, abortion of 40 sows, delivery of whole still births of 22 sows, and infertility of 122 sows in the pig farm were assumed to be caused by the concussion or sound stress after consecutive detonation and use of heavy equipments.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.45 no.1
• /
• pp.85-90
• /
• 2008

In this paper, we studied on dual reflector adjusted to monopulse antenna system. As a result, when the efficiency of main reflector is more than 70%, The size of reflector is 30 wavelength of maximum frequency and minimum frequency gain is 37.9dBi, and Maximum frequency gain is 38.6dBi. Also, when a radius is D and Focus-distance is $F_e$, a scheme for efficiency improvement of Sub Reflector is to increase the Focus-distance to Diameter Ratio. In this case, Cross polarization in Far field improved and spherical spreading loss in circumference of reflector reduced. The influence of Radiation pattern followed by the side displacement of feed antenna(at $x_sy_s$) is decreased, it is confirmed that performance of scanning is improved.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39C no.9
• /
• pp.820-827
• /
• 2014

One of the basic problems in Wireless Sensor Networks (WSNs) is the localization of the sensor nodes based on the known location of numerous anchor nodes. WSNs generally consist of a large number of sensor nodes and recording the location of each sensor nodes becomes a difficult task. On the other hand, based on the application environment, the nodes may be subject to mobility and their location changes with time. Therefore, a scheme that will autonomously estimate or calculate the position of the sensor nodes is desirable. This paper presents an intelligent localization scheme, which is an artificial neural network (ANN) based localization scheme used to estimate the position of the unknown nodes. In the proposed method, three anchors nodes are used. The mobile or deployed sensor nodes request a beacon from the anchor nodes and utilizes the received signal strength indicator (RSSI) of the beacons received. The RSSI values vary depending on the distance between the mobile and the anchor nodes. The three RSSI values are used as the input to the ANN in order to estimate the location of the sensor nodes. A feed-forward artificial neural network with back propagation method for training has been employed. An average Euclidian distance error of 0.70 m has been achieved using a ANN having 3 inputs, two hidden layers, and two outputs (x and y coordinates of the position).

• Korean Journal of Food Science and Technology
• /
• v.30 no.5
• /
• pp.1024-1028
• /
• 1998

Crystalline structure of the extrudate of high amylose corn starch was studied by X-ray diffractometer and $^{13}C\;NMR$. The X-ray diffraction crystal ratio of the extrudates (barrel temperature $100^{\circ}C$ )of high amylose corn starch slightly increased from 6.08% to 8.37% by increasing feed moisture content from 25% to 45%. But extrudates of high amylose corn starch showed similar crystal ratio on various extrusion conditions. Extrudates of high amylose corn starch (feed moisture content 20%, barrel temp $140^{\circ}C$) showed more enlarged crystal structure than that of non-extrudates. The perpendicular distance of crystal increased by extrusion. Crystal ratio was changed from $6.3{\sim}8.3%$ to $4.5{\sim}5.8%$ during storage at $4^{\circ}C$. Starch configuration was examined with $^{13}C\;NMR$. Double helical content was measured by $^{13}C\;NMR$ method. The highest double helical content (60%) was obtained from high amylose corn starch extrudate (barrel temp.: $100^{\circ}C$, feed moisture content 45%). Double helical contents and resistant starch (RS) yield (pancreatin) were positively correlated. However, double helical content of the extrudates was not changed by the storage at $4^{\circ}C$.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.08a
• /
• pp.146-147
• /
• 2011

Processing a large area substrate for liquid crystal display (LCD) or solar panel applications in a capacitively coupled plasma (CCP) reactor is becoming increasingly challenging because of the size of the substrate size is no longer negligible compared to the wavelength of the applied radio frequency (RF) power. The situation is even worse when the driving frequency is increased to the Very High Frequency (VHF) range. When the substrate size is still smaller than 1/8 of the wavelength, one can obtain reasonably uniform process results by utilizing with methods such as tailoring the precursor gas distribution by adjustingthrough shower head hole distribution or hole size modification, locally adjusting the distance between the substrate and the electrode, and shaping shower head holes to modulate the hollow cathode effect modifying theand plasma density distribution by shaping shower head holes to adjust the follow cathode effect. At higher frequencies, such as 40 MHz for Gen 8.5 (2.2 m${\times}$2.6 m substrate), these methods are not effective, because the substrate is large enough that first node of the standing wave appears within the substrate. In such a case, the plasma discharge cannot be sustained at the node and results in an extremely non-uniform process. At Applied Materials, we have studied several methods of modifying the standing wave pattern to adjusting improve process non-uniformity for a Gen 8.5 size CCP reactor operating in the VHF range. First, we used magnetic materials (ferrite) to modify wave propagation. We placed ferrite blocks along two opposing edges of the powered electrode. This changes the boundary condition for electro-magnetic waves, and as a result, the standing wave pattern is significantly stretched towards the ferrite lined edges. In conjunction with a phase modulation technique, we have seen improvement in process uniformity. Another method involves feeding 40 MHz from four feed points near the four corners of the electrode. The phase between each feed points are dynamically adjusted to modify the resulting interference pattern, which in turn modulate the plasma distribution in time and affect the process uniformity. We achieved process uniformity of <20% with this method. A third method involves using two frequencies. In this case 40 MHz is used in a supplementary manner to improve the performance of 13 MHz process. Even at 13 MHz, the RF electric field falls off around the corners and edges on a Gen 8.5 substrate. Although, the conventional methods mentioned above improve the uniformity, they have limitations, and they cannot compensate especially as the applied power is increased, which causes the wavelength becomes shorter. 40 MHz is used to overcome such limitations. 13 MHz is applied at the center, and 40 MHz at the four corners. By modulating the interference between the signals from the four feed points, we found that 40 MHz power is preferentially channeled towards the edges and corners. We will discuss an innovative method of controlling 40 MHz to achieve this effect.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.41 no.1
• /
• pp.16-22
• /
• 2021

This experiment was conducted to study on the growth characteristics and seed productivity of Italian ryegrass (Lolium multiflorum Lam., IRG) planted in the Spring in Gangwon Highland according to the seeding distance (20, 30 and 40 cm). The field was located in highland around 600 m above sea level. The experimental design was randomized block design with three replication and the tested IRG variety was 'Greencall' developed by National Institute of Animal Science (NIAS). IRG was sown on March 26, 2020, and harvested on July 2. The plant height was the shortest at 80.5 cm in the 40 cm seeding distance plot (P<0.05), and there was no significant difference between the 20 and 30 cm seeding distance. The number of spike per square meter (㎡) was significantly higher in the 20 cm seeding distance plot than that of 40 cm (937 vs. 571). The dry matter (DM) content of seed and straw after harvesting was 49.70 and 33.36 % on average, and there was no significant difference between treatments (P>005). However, there was a significant difference in the fresh and DM yield of seeds and straw (P<0.05). DM yield of seeds was significantly higher in 20 cm distance than that of 40 cm, and the yield of straw was the same trend. On the other hand, there was no significant difference in DM yield between 20 cm and 30 cm and also in the feed value of straw after seed harvesting among seeding distance. The average CP, ADF, NDF, and TDN contents were 6.91, 36.76, 61.75 and 59.86%, respectively, and the RFV value was 91. Considering the above results, the production of Italian ryegrass seeds sown in the spring in the highlands of the Gangwon is lower than that of autumn sowing, but it is judged that it needs to be reviewed in case it is unavoidable. In the future, there should be an economic analysis and the development of technology that can increase production.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.13 no.1
• /
• pp.67-74
• /
• 2014

In this paper, we designed a multiband monopole antenna for next-generation WLAN system. In conventional WLAN system, UWB antennas were used together, and, because the radiation occurs in different parts depending on the antenna structure, it has the disadvantage of having an unstable impulse response characteristic due to dispersion characteristics. Although a UWB antenna that has suitable radiation pattern for WLAN band, it does not have good impedance matching and has severe echo. Therefore, in this paper, a monopole antenna was designed by using CPW power feed so that various impedances can be easily implemented when designing an antenna and more parameters can be derived that can be used for design for optimal performance.