• Transactions of the Korean Society of Automotive Engineers
• /
• v.15 no.6
• /
• pp.1-8
• /
• 2007

Minimizing the cylinder wear and the consumption rate of cylinder oil in a large two-stroke marine diesel engine is of great economic importance. In Korea, authors first developed a motor-driven cylinder lubricator for a Wartsila Switzerland large two-stroke diesel engine. The characteristic of the developed product is that can control automatically the oil feed rate with a load fluctuation by the motor drive and the offset cam. For manufacturing the reliable and useful products, however, it is necessary to investigate further characteristics and to improve performances as a cylinder lubricator. In this study, the effects of pump motor speed, plunger stroke and cylinder back pressure on oil feed rate, maximum discharge and delivery pressures are experimentally investigated by using the electronically controlled quill injection system and distributer in the developed cylinder lubricator. It is found that the oil feed rates of electronic control and mechanical type quills with the in-cylinder back pressure are differently characterized by the role of accumulator, the viscous resistance of contact area, etc. It can be also shown that the maximum discharge pressure of the electronic control quill is lower than the mechanical type one but the maximum discharge pressure difference of two types decreased as plunger stroke is small, and the maximum delivery pressures of two types increased as plunger stroke, motor speed and back pressure are elevated but the maximum delivery pressure of mechanical type is higher than the one of electronic control type.

• Journal of Food and Nutrition Research
• /
• v.9 no.7
• /
• pp.363-366
• /
• 2021

This study aimed to determine the effect of regulating crude protein (CP) levels in total mixed ration (TMR) on the growth performance and carcass characteristics of Hanwoo steers. The regimens were divided into a control group (TMR with 15% CP) and treatment group (TMR with 12.5% CP). The viable cell count and fermentation potential of the prepared experimental feed and the nutrient digestibility were evaluated. Growth performance and carcass characteristics were confirmed by evaluating the weight and intake of Hanwoo steers, and an economic analysis was performed. Only CP digestibility was higher in the control group than in the treatment group (p<0.05). There were no significant differences in the initial and final body weights, daily gain, and feed requirements between the groups (p>0.05). There were no significant differences in carcass weight, yield index, back fat thickness, and loin area (p>0.05), but the appearance rate of quality grade A was higher in the treatment group than in the control group. In addition, there was no difference in the meat quality characteristics, such as marbling, meat color, fat color, texture, and maturity (p>0.05), and the treatment group had a higher rate of 1++ grade than the control group. Economic analysis showed that when 10 cattle were shipped, the control group received a price of 100,041 thousand won, and the treatment group received a price of 102,033 thousand won. When the income for each group was calculated, the production cost of the treatment group was 8% lower than that of the control group; thus, a higher net profit could be expected considering the low feed cost. Therefore, the economic feasibility of steer raising could be improved while maintaining productivity by controlling CP levels in feed. In addition, this study provides useful basic data for precisely adjusting the CP levels in feed for Hanwoo steers.

• Journal of Electrical Engineering and Technology
• /
• v.11 no.5
• /
• pp.1449-1456
• /
• 2016

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1997.04a
• /
• pp.993-997
• /
• 1997

The continuous chip depresses the accuracy of workpieces and promotes the wear of machine tools and hunts operators. So chip control os a major problem in turning process. In this paper, a method of chip identification is develope by pyrometer. The identifier is applied in real-time control of chip pattern with adjusting feedrate.

• Asian-Australasian Journal of Animal Sciences
• /
• v.17 no.11
• /
• pp.1553-1561
• /
• 2004

Two feeding trials were conducted with 128 pullets from 4 to 20 weeks of age and 96 laying hens from 23 to 63 weeks of age to evaluate the effects of scavenging and type of protein supplement on the feed intake and performance of improved pullets and laying hens. The experiments had a completely randomized design with four dietary treatments and four replicates. Treatments were: Control (Cont), scavenging but with access to a balanced concentrate at night; confinement (CF) and given the control feed ad libitum; scavenging and supplemented at night with the control feed, but with soybean meal replaced by cassava leaf meal (CLM); scavenging and supplemented at night with the control feed, but with fishmeal replaced y soybean meal (SBM). The mean daily dry matter (DMI), metabolizable energy (MEI) and crude protein intakes (CPI) of the pullets and laying hens, respectively, were 28%, and 18% higher for the confinement treatment (CF) compared to the scavenging treatments (p<0.001). The DMI, MEI and CPI of the pullets were not significantly different among scavenging treatments (p>0.05), but for the layers DMI, MEI and CPI were significantly higher for the CLM and SBM treatments compared to the Cont treatment (p<0.001). In the growing period, the average daily weight gain (ADG), supplement feed conversion ratio (FCR) and supplement feed cost/kg eggs (FCS) were not significantly different for CF compared to Cont, and among scavenging treatments (p>0.05). In the laying period, the hen-day production was significantly lower, and supplement FCR and FCS significantly higher for the CF compared to the scavenging treatments (p<0.001). Egg weight, and yolk, albumen and shell percentage and shape index were not significantly different among the scavenging treatments (p>0.05). However, shell and yolk percentages were significantly lower for the CF compared to the Cont treatment (p<0.01). Mortality was significantly higher for the CF compared to the scavenging treatments for pullets, and was significantly lower for the CF compared to scavenging treatments for laying hens (p<0.001). It was concluded that scavenging pullets and layers were getting around 28% and 18%, respectively, of their nutrient requirements from scavenging activities, resulting in correspondingly lower supplement feed conversion ratios and feed costs. Daily gains of the pullets were not affected by scavenging or protein supplement, but egg production and mortality were lower for the confined hens.

• Journal of information and communication convergence engineering
• /
• v.4 no.4
• /
• pp.170-173
• /
• 2006

Recently, with increasing efficiency of DSC (photo-electrochemical using a nano-particle), The Performance of DSC solar generation system also needs improvement. The approach consists of a Fly-back DC-DC (transfer ratio 1:10) converter to boost the DSC cell voltage to 300VDC. The four switch (MOSFET) inverter is employed to produce 220V, 60Hz AC outputs. High performance, easy manufacturability, lower component count., safety and cost are addressed. Protection and diagnostic features form an important part of the design. Another highlight of the proposed design is the control strategy, which allows the inverter to adapt to the: requirements of the load as well as the power source. A unique aspect of the design is the use of the DSP TMS320LF2406 to control the inverter by current and voltage feed-back. Efficient and smooth control of the: power drawn from the DSC Cell is achieved by controlling the front end DC-DC converter in current mode.

• Journal of Advanced Marine Engineering and Technology
• /
• v.28 no.2
• /
• pp.228-236
• /
• 2004

In this paper. we present a neuro-fuzzy controller which unifies both fuzzy logic and multi-layered feed forward neural networks. Fuzzy logic provides a means for converting linguistic control knowledge into control actions. On the other hand. feed forward neural networks provide salient features. such as learning and parallelism. In the proposed neuro-fuzzy controller. the parameters of membership functions in the antecedent part of fuzzy inference rules are identified by using the error back propagation algorithm as a learning rule. while the coefficients of the linear combination of input variables in the consequent part are determined by using the least square estimation method. Finally. the effectiveness of the proposed controller is verified through computer simulation for an inverted pole system.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 1999.10a
• /
• pp.221-226
• /
• 1999

It can be acquired the high effective productivity through of high speed, precision of machine tools, and then, machine tools will be got a competitive power. Industrially advanced countries already developed that the high speed feed is 50m/min using the high speed ball screw. Also, a lot of problems have happened the feed and servo drive system. It is necessary to study about the character of positioning accuracy, heat generation and high speed/accuracy control for feed/servo drive system of high speed/accuracy. In this study, we make use of high performance vertical machine center with a ball screw of large-scale-lead. Also, we'll apply the high-speed/accuracy control technology in this part of feedforward control, multi-buffering block size, etc. Using the design of the mechanical element and high-speed precision control, the basic design concept can be established.

• Proceedings of the Korea Society of Poultry Science Conference
• /
• 2001.11a
• /
• pp.86-88
• /
• 2001

An experiment was conducted to determine how broiler performance, feces and litter concentration of N can be maintained and whether NH3 gas concentration can be reduced with reducing dietary CP, adding ALUM(AL2(SO4)3.14H20) in litter and supplementing with amino acid and vitamin D in feed. The experiment was divided into a starter period(1 to 21d) and grower period(22 to 42d), each having three different CP with 90 birds per treatment of 3 replications. The CP treatments consisted of a mean CP of 23.0(control 71), 20.4 (72) and 18.0 (73) % for starter and 21.0(control 71),19.3 (72) and 17.0 (73) % for grower, respectively, but with similar amino acid levels as the control. Alum was mixed in each treatment except control treatment with 200g in kilogram litter(rice bran) weight. Results suggested that reducing CP below control in the diets fed during 3wks and 6wks slightly increased feed gain and slightly decreased feed intake and weight gain. However, there were no significant difference among treatments. Reducing CP caused NH3 gas concentration to decline by 74.8 - 80.9% when Alum was mixed in litter(P < 0.05). Litter N concentration did not show any difference(P > 0.05) among treatments. These results suggest that dietary manipulation with adding Alum in litter show for significant reducing NH3 gas concentration while maintaining acceptable Production performance from broiler.

• Journal of Biosystems Engineering
• /
• v.23 no.1
• /
• pp.83-90
• /
• 1998

In this paper the automatic system for dairy cattle has been desisted such as body temperature measuring unit, feed supplying unit and temperature control unit. Since e disease is strongly related to the body temperature of cattle, early detection of the abnormal temperature would prevent the severe problems which nay occur in dairy farms. An electronic component AD590J is used as temperature sensor for the system, The device is highly robust against the noise since the output signal is the current so it can be applied to a long distance sensing The resolution of signal is 0.1$^{\circ}C$ and the current is 10㎷ Also 12-bit A/D converter is desisted fir interfacing the sensor with a one-chip microprocessor. A temperature measuring experiment using the developed system has been done for measuring the temperature of human beings and the system was proven to be useful for measuring the body temperature of dairy cattle properly. A geared AC motor is used for the feed supplying unit The heater and fm are used as temperature control unit. The feed supplying unit and temperature control unit are well operating in the laboratory experiment.