• 환경위생공학
• /
• 제15권3호
• /
• pp.23-23
• /
• 2000

In this study, to determine the optimum fermentation process for the feed production of food wastes and estimate the practical value of fermented feed using kudzu creeper and sawdust as bulking agent. This study considered initial C/N ratio control as the fermentation process variables. The results are summarized as follows. Minimum water contents of byproducts in the fermentation feed production showed 3994(kudzu), 37%( sawdust) at the C/N ratio 25 and 45%(kudzu, sawdust) at the C/N ratio 35. Temperature variations in the fermentation feed production at the C/n ratio 25 indicated 68'C(kudzu), 70'C (sawdust).Optimum condition of consists of fermentation process of water content, C/N ratio and permeability (porous structure of the mixture). For optimum fermentation of gravitationally, dewatered garbage, the proper mixing ratios of kudzu(moisture contents : 17.3%) and sawdust(moisture contents : 13.2%) were 41% and 39%, respectively Major biological reaction in the aerobic fermentation feed production occurred during 12~14hrs

• 한국식품영양학회지
• /
• 제30권2호
• /
• pp.319-325
• /
• 2017

본 연구에서는 상업적으로 가장 많이 쓰는 커피 추출기인 2단계 퍼콜레이터를 사용하여 인스턴트커피를 제조하기 위한 커피추출조건을 최적화하였다. 반응표면분석을 위한 수학적 모델식을 구하기 위해 중심합성계획법이 사용되었고, 구해진 모델식에서는 커피추출액의 추출 수율과 추출액의 전반적인 기호도가 3가지 요인(추출기의 급수온도, 추출배수, 추출시간)의 2차식으로 표현되었다. 반응표면분석의 결과를 바탕으로 40% 이상의 수율을 보이는 범위에서, 추출수율과 전반적인 기호도를 최대로 하는 최적 커피 추출 조건은 급수온도 $163^{\circ}C$, 추출배수 4.3 및 추출시간 27분이었다. 이 결과는 산업에서 경쟁력 있는 인스턴트 커피 제조를 위한 커피 추출 조건에 대한 기초 자료를 제공한다.

• Journal of Biosystems Engineering
• /
• 제38권4호
• /
• pp.306-311
• /
• 2013

Purpose: With the ever-rising energy prices, thermal energy heavily consuming facilities of the agricultural sector such as commercialized greenhouses and large-scale Rice Processing Complexes (RPCs) need to cut down their energy cost if they must run profitable businesses continually. One possible way to reduce their energy cost is to utilize combustible agricultural by-products or low-price oil instead of light oil as the fuel for their boiler systems. This study aims to analyze the heavy oil combustion characteristics of a newly developed hot water boiler system that can use both rice husk and heavy oil as its fuel convertibly. Methods: Heavy oil combustion experiments were conducted in this study employing four fuel feed rates (7.6, 8.5, 9.5, 11.4 $l/h$) at a combustion furnace vacuum pressure of 500 Pa and with four combustion furnace vacuum pressures (375, 500, 625, 750 Pa) at fuel feed rates of 9.5 and 11.4 $l/h$. Temperatures at five locations inside the combustion furnace and 20 additional locations throughout the whole hot water boiler system were measured to ascertain the combustion characteristics of the heavy oil. From the temperature measurement data, the thermal efficiency of the system was calculated. Flue gas smoke density and concentrations of air-polluting components in the flue gas were also measured by a gas analyzer. Results: As the fuel feed rate or combustion furnace vacuum pressure increased, the average temperature in the combustion furnace decreased but the thermal efficiency of the system showed no distinctive change. On the other hand, the thermal efficiency of the system was inversely proportionally to the vacuum level in the furnace. For all experimental conditions, the thermal efficiency remained in the range of 80.1-89.6%. The CO concentration in the flue gas was negligibly low. The NO and $SO_2$ concentration as well as the smoke density met the legal requirements. Conclusions: Considering the combustion temperature characteristics, thermal efficiency, and flue gas composition, the optimal combustion condition of the system seemed to be either the fuel feed rate of 9.5 $l/h$ with a combustion furnace vacuum pressure of 375 Pa or a fuel feed rate of 11.4 $l/h$ with a furnace vacuum pressure between 500 Pa and 625 Pa.

• 한국초전도ㆍ저온공학회논문지
• /
• 제21권2호
• /
• pp.22-25
• /
• 2019

The superconducting magnetic separation system has been developing to separate the iron oxide scale from the feed water of the thermal power plant. The accumulation in the boiler lowers the heat exchange rate or in the worst case damages it. For this reason, in order to prevent scale generation, controlling pH and redox potential is employed. However, these methods are not sufficient and then the chemical cleaning is performed regularly. A superconducting magnetic separation system is investigated for removing iron oxide scale in a feed water system. Water supply conditions of the thermal power plant are as follows, flow rate 400 t / h, flow speed 0.2 m / s, pressure 2 MPa, temperature $160-200^{\circ}C$, amount of scale generation 50 - 120 t / 2 years. The main iron oxide scale is magnetite (ferromagnetic substance) and its particle size is several tens ${\mu}m$. As the first step we are considering to introduce the system to the chemical cleaning process of the thermal power plant instead of the thermal power plant itself. The current status of development will be reported.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 B
• /
• pp.719-721
• /
• 1998

In this paper, we reviewed the steam temperature control in an once through boiler. The steam temperature control is very difficult. Generally, steam temperature of an once through boiler is not only controlled by boiler spray water flow, but also influenced by feed water flow and fuel flow. An advanced control strategy has been developed by experienced engineer. Specifically, We reviewed temperature control strategy for Taian power plant in this paper. This control strategy is represented by state control observer. This state control observer algorithm for temperature control has been used since the late 1980's. This paper describes control strategy employed and observed benefits from advanced steam temperature control.

• 미생물학회지
• /
• 제11권4호
• /
• pp.157-166
• /
• 1973

Fermented feed using rice, barley, wheat, and defatted rice brans as the raw materials were prepared by 3 species of wild yeasts which were selected among 35 strains of yeasts isolated, and their analytical values were examined. The results were as follows : 1. The three yeasts were identified as H.amomala var. anomala (No.225), Candida utilis (No.400), and Irpex-cellulase(consors) (no.403-A). 2. The optimum pH, and sugar concentration of these yeasts in liquid culture were pH 5.0 and Bllg. 10.deg. each. The optimum temperature was 30.deg.C for No.225 and No.403-A, 25.deg.C for No.400. The No.225 and No.403-A grow at higher temperature than 37.deg.C and 40.deg.C each. 3. The No.225 yeast had a large vegetative cell and strong sugar fermentability. The No.225 and 403-A could assimilate cellobiose, xylose, $KNO_2$ and $KNO_3$. These properties were fit for bran fermentation. 4. The No.403-A microorganism was a yeast-like microbe and showed cellulase activity which might help the propagation of other yeasts on the brans. 5. The analytical data of fermented feed indicated the following order of usable value ; rice-wheat-barley bran 4:4:2, rice-wheat bran 5:5, rice-barley bran 5:5, rice-defatted rice bran 5:5. 6. the fermented feed were prepared by mixing brans, 0.3% ammonium sulfate and 5%(w/w) inoculum of yeast suspension in 4% glucose solution. Water content 70-80%, fermentation temperature 25-30.deg.C, and fermentation time 2-3 days were given. 7. The rice-wheat bran 5:5 and rice-barley bran 5:5 fermented feed showed 11, 17-11.45% protein increase, and the rice-barley-wheat bran 4:4:2 and rice-defatted bran 5:5 showed 3.75-6.03% protein increase. 8. The fermented feed prepared in this experiment by the author might work as a nutritive feed using microbial cell body, enzymes produced by microbes and other microbial cell constituents.

• 한국해양생명과학회지
• /
• 제3권2호
• /
• pp.67-73
• /
• 2018

본 연구는 수온, 염분, 사육밀도 및 혼합 먹이생물 공급량과 같은 환경요인이 왕우럭 Tresus keenae의 유생사육 시 생존 및 발생에 미치는 영향을 조사하기 위하여 수행하였다. 연구 결과, 왕우럭 유생사육의 최적 조건은 수온 20℃에서 24℃, 염분 30 psu, 사육밀도 1 ml당 5개체 및 먹이생물 I. galbana, C. simplex 및 T. suecica 혼합 공급량 10×10⁴ 세포/ml이였다. 본 연구 결과를 통해 밝혀진 왕우럭 유생 최적의 사육 환경요인은 빠른 성장 및 높은 생존을 통해 생산성 향상에 기여하리라 생각된다.

• 멤브레인
• /
• 제14권3호
• /
• pp.258-262
• /
• 2004

Trifluoroethyl methacrylate (TFEMA)는 발수발유용 특수도료나 광섬유의 외관에 중요하게 쓰여지는 코팅제에 쓰여지는 산업적으로 중요한 단량체로, 주로 산촉매 하에 trifluoro ethanol (TFEA)와 methacrylic acid (MA)의 에스테르화 반응에 의해 제조된다. 이러한 TFEMA의 제조에 투과증발막의 적용가능성을 알아보기 위한 선행연구로서, 상용화된 폴리비닐알콜계 투과증발막(GFT Membrane $Pervap^{\circledR}1005$)을 대상으로 반응물의 하나인 trifluoroethanol (TFEA)을 대상으로 온도와 농도의 변화에 따른 투과증발실험을 실시하였다. 투과증발실험 결과 TFEA 농도가 90에서 99 wt%로 높아질수록 투과용액 내의 물의 감소에 기인한 전체투과량은 감소하였다. TFEA/물 선택도는 95 wt% TFEA 농도까지는 높아지는 경향을 보였지만 97 wt%부터 감소하여 99 wt%에서는 급격히 감소하였다. 운전온도가 상승함에 따라 투과도의 증가와 더불어, 선택도도 증가하는 경향을 보였다. 적용된 TFEA 농도와 운전온도의 범위에서 GFT막은 물에 대한 우수한 투과도와 선택성을 보였다. 이러한 TFEA/물 혼합용액에 대한 높은 탈수성능은 GFT 투과증발막이 TFEMA의 에스테르화 막반응기에 적용될 수 있음을 확인시켜 주었다.

• 한국식품저장유통학회지
• /
• 제18권3호
• /
• pp.271-278
• /
• 2011

다습한 열대지방에서 카사바는 중요한 식물자원이다. 수분함량(20, 25%)와 배럴온도(110, $130^{\circ}C$) 에 따른 압출성형 카사바전분의 물리적 특성(밀도, 팽화율, 비기계적 에너지, 색, 수분용해지수, 수분흡착지수)와 호화특성을 조사하였다. 카사바전분 압출성형공정에서 수분 투입량은 압출성형물의 비기계적 에너지 투입량, 비길이, 밀도에 유의적으로 영향을 미쳤으며(p<0.05) 직경팽화지수, 겉보기탄성계수와 절단강도에서 유의성을 보여주었다(p<0.1). 또한 수분투입량과 배럴온도의 상호관계에서 비기계적 에너지 투입량과 밀도(p<0.1), 비길이(p<0.05), 적색도(p<0.01)는 유의성을 나타내었다. 수분투입량이 증가함에 따라 밀도, 겉보기탄성계수, 절단강도, 저온최고점도, 구조파괴점도, 최종점도는 증가하였으며, 직경팽화지수와 비길이는 감소하였다. 카사바전분 압출성형공정에서 수분투입량과 배럴온도는 명도와 황색도, 수분용해지수, 수분흡착지수에 영향을 미치지 않았다. 이 연구의 결과는 카사바 전분을 압출성형하여 사료와 식품을 개발하는데 유용하게 이용될 수 있을 것이다.

• 청정기술
• /
• 제29권1호
• /
• pp.39-45
• /
• 2023

To investigate the effects of Mg addition at different aging times and temperatures, Cu/MgO/Al₂O₃ catalysts were synthesized for the low-temperature water gas shift (LT-WGS) reaction. The co-precipitation method was employed to prepare the catalysts with a fixed Cu amount of 30 mol% and varied amounts of Mg/Al. Synthesized catalysts were characterized using XRD, BET, and H₂-TPR analysis. Among the prepared catalysts, the highest CO conversion was achieved by the Cu/MgO/Al₂O₃ catalyst (30/40/30 mol%) with a 60 ℃ aging temperature and a 24 h aging time under a CO₂-rich feed gas. Due to it having the lowest reduction temperature and a good dispersion of CuO, the catalyst exhibited around 65% CO conversion with a gas hourly space velocity (GHSV) of 14,089 h-1 at 300 ℃. However, it has been noted that aging temperatures greater or less than 60 ℃ and aging times longer than 24 h had an adverse impact, resulting in a lower surface area and a higher reduction temperature bulk-CuO phase, leading to lower catalytic activity. The main findings of this study confirmed that one of the main factors determining catalytic activity is the ease of reducibility in the absence of bulk-like CuO species. Finally, the long-term test revealed that the catalytic activity and stability remained constant under a high concentration of CO₂ in the feed gas for 19 h with an average CO conversion of 61.83%.